# moog ball joints
**URL:** https://forums.speedlife.net/t/moog-ball-joints/99650
**Category:** SON240sx Automotive
**Created:** [September 6, 2006, 7:03pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650 "2006-09-06T19:03:12Z")
**Posts on this page:** 18
**Page:** 1
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 6, 2006, 7:03pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/1 "2006-09-06T19:03:12Z")
Where in Toronto can you get these. I’m trying not to go through PDM cause I’d like to get them before the weekend if possible.
Anyone sourced these before.
Gonad you did ball joints. Where did you get them?
Thanks,
Andrew.
---
### Author:  [@renegade141](https://forums.speedlife.net/u/renegade141)
#### Post date: [September 6, 2006, 7:43pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/2 "2006-09-06T19:43:07Z")
Colin’s Auto on Nantucket at McCowan/Sheppard
that’s where i got mine.
hope that helps
---
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 6, 2006, 7:44pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/3 "2006-09-06T19:44:44Z")
> [@renegade141](#):
>
> Colin’s Auto on Nantucket at McCowan/Sheppard
>
> that’s where i got mine.
>
> hope that helps
sweet thanks man, I’ll check them out.
Nantucket never stops amazing me. I get tires there, KHF was there and now maybe ball joints 😛
Andrew.
---
### Author:  [@renegade141](https://forums.speedlife.net/u/renegade141)
#### Post date: [September 6, 2006, 7:45pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/4 "2006-09-06T19:45:55Z")
tell them you work at a garage, whichever one, and they’ll prolly give you
list price, instead of retail
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 6, 2006, 10:07pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/5 "2006-09-06T22:07:19Z")
> [@renegade141](#):
>
> tell them you work at a garage, whichever one, and they’ll prolly give you
>
> list price, instead of retail
Some smaller shops such as Colins Auto want an account number and usually follow up if ur not a familiar face… If your a good bullshitter it works easy…
Personally i would go to PartSource and talk to some useless teenager tit and tell him you have a “commercial account” at another part source, i.e. another city far from the store your at… scarborough say mississauga, or barrie…
They never question it there, and they cannot check on there computers if you actually have an account if the store is out of the city, AFAIK.
Give it a shot, always works for me, and on parts like ball joints, F\*\*\* normally say $60 retail you should expect to pay $20-25…
Good luck andrew…
---
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 6, 2006, 10:11pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/6 "2006-09-06T22:11:09Z")
> [@Brandon](#):
>
> [quote=renegade141]tell them you work at a garage, whichever one, and they’ll prolly give you
>
> list price, instead of retail
Some smaller shops such as Colins Auto want an account number and usually follow up if ur not a familiar face… If your a good bullshitter it works easy…
Personally i would go to PartSource and talk to some useless teenager tit and tell him you have a “commercial account” at another part source, i.e. another city far from the store your at… scarborough say mississauga, or barrie…
They never question it there, and they cannot check on there computers if you actually have an account if the store is out of the city, AFAIK.
Give it a shot, always works for me, and on parts like ball joints, F\*\*\* normally say $60 retail you should expect to pay $20-25…
Good luck andrew…[/quote]
cool I’ll give that a shot too. Thanks Brandon.
Andrew.
---
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 7, 2006, 8:32am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/7 "2006-09-07T08:32:13Z")
Part Source FTW.
Moog = $78.99 each.
Now the fun part begins. Pressing out the old ones :lol:
Andrew.
---
### Author:  [@roast](https://forums.speedlife.net/u/roast)
#### Post date: [September 7, 2006, 9:06am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/8 "2006-09-07T09:06:17Z")
> [@AnDrEw](#):
>
> Part Source FTW.
> Moog = $78.99 each.
>
> Now the fun part begins. Pressing out the old ones :lol:
>
> Andrew.
Go for socks record and break an even bigger vice but don’t attempt the 1 hand slash record.
---
### Author:  [@S13GG](https://forums.speedlife.net/u/S13GG)
#### Post date: [September 7, 2006, 9:06am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/9 "2006-09-07T09:06:40Z")
> [@AnDrEw](#):
>
> Part Source FTW.
> Moog = $78.99 each.
>
> Now the fun part begins. Pressing out the old ones :lol:
>
> Andrew.
thats fronts?
did you inquire about rears? I have heard rumours (unsubstaniated) that rears are available, but no concrete proof.
little search (earlier) showed a freshalloy thread where sentra fronts were mm larger than S chassis rears and could be used, but no direct fit…
---
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 7, 2006, 9:15am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/10 "2006-09-07T09:15:18Z")
> [@S13GG](#):
>
> [quote=AnDrEw]Part Source FTW.
> Moog = $78.99 each.
>
> Now the fun part begins. Pressing out the old ones :lol:
>
> Andrew.
thats fronts?
did you inquire about rears? I have heard rumours (unsubstaniated) that rears are available, but no concrete proof.
little search (earlier) showed a freshalloy thread where sentra fronts were mm larger than S chassis rears and could be used, but no direct fit…[/quote]
yeah thats fronts.
I’ll ask for you when I order mine this evening.
Roast, I have a big old angry press at the shop 😉
Crushed figner maybe :lol:
Andrew.
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [September 7, 2006, 10:47am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/11 "2006-09-07T10:47:11Z")
if you havent bought them yet please dont.
you can get entire FLCA’s with balljoint pressed in already and a new inner bushing for the same price or less.
the dude lists them on ebay but you can walk right into one of his stores and buy them.
it becomes a straight bolt in affair, no messing with pickle forks and junks… well i guess you need a pickle fork to pop the ball joint out of the spindle but whatever.
---
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 7, 2006, 10:50am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/12 "2006-09-07T10:50:05Z")
> [@bing](#):
>
> if you havent bought them yet please dont.
>
> you can get entire FLCA’s with balljoint pressed in already and a new inner bushing for the same price or less.
>
> the dude lists them on ebay but you can walk right into one of his stores and buy them.
>
> it becomes a straight bolt in affair, no messing with pickle forks and junks… well i guess you need a pickle fork to pop the ball joint out of the spindle but whatever.
Yeah I can get lower arms with ball joints for 65 bucks a pop. However its OEM replacement arms, bushings and ball joints.
I’d rather get ball joints that will last my abuse and control arms that were from the factory. My bushings are fine.
Andrew.
---
### Author:  [@DTS](https://forums.speedlife.net/u/DTS)
#### Post date: [September 7, 2006, 7:15pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/13 "2006-09-07T19:15:00Z")
wtf where can you get those oem arms w/ balljoint and bushings for 65 i just spent 70 on a spicer balljoint
---
### Author:  [@Theo23](https://forums.speedlife.net/u/Theo23)
#### Post date: [September 7, 2006, 9:10pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/14 "2006-09-07T21:10:52Z")
> [@AnDrEw](#):
>
> I’d rather get ball joints that will last my abuse
Yeah, they should be able to handle lots of offtrack excursions.
:lol:
1.
Just pullin your shorts… uh, I mean leg, IBox 😉
---
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 7, 2006, 9:19pm UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/15 "2006-09-07T21:19:46Z")
> [@Theo23](#):
>
> [quote=AnDrEw]I’d rather get ball joints that will last my abuse
Yeah, they should be able to handle lots of offtrack excursions.
:lol:
1.
Just pullin your shorts… uh, I mean leg, IBox 😉[/quote]
:lol:
or when I two wheel the car on some of the shannonville curbs.
DTS if they can still get them. Richmondhill automotive.
Andrew.
---
### Author:  [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)
#### Post date: [September 8, 2006, 8:39am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/16 "2006-09-08T08:39:44Z")
Darian,
I asked about the rear ball joints. You can only buy the whole arm with ball joint and bushing. Cost is 130 bucks.
Andrew.
---
### Author:  [@S13GG](https://forums.speedlife.net/u/S13GG)
#### Post date: [September 8, 2006, 8:55am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/17 "2006-09-08T08:55:46Z")
> [@AnDrEw](#):
>
> Darian,
>
> I asked about the rear ball joints. You can only buy the whole arm with ball joint and bushing. Cost is 130 bucks.
>
> Andrew.
thought so… thanks
---
### Author:  [@Uniac](https://forums.speedlife.net/u/Uniac)
#### Post date: [September 8, 2006, 9:47am UTC](https://forums.speedlife.net/t/moog-ball-joints/99650/18 "2006-09-08T09:47:23Z")
as for moog, i know it’s been answered, BUT moog is just federal Mogal by a differnt name. Comes in the same box, same part numbers can be used, same warenty bla bla bla.
…was the wholesale manager at partsource.