# More Parts
**URL:** https://forums.speedlife.net/t/more-parts/167378
**Category:** PittSpeed Off Topic
**Created:** [June 26, 2004, 9:59am UTC](https://forums.speedlife.net/t/more-parts/167378 "2004-06-26T09:59:15Z")
**Posts on this page:** 11
**Page:** 1
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [June 26, 2004, 9:59am UTC](https://forums.speedlife.net/t/more-parts/167378/1 "2004-06-26T09:59:15Z")
Ain’t they purty? MAC mid lengths with Jet Hot sterling finish.
[http://home.comcast.net/~jsaccani/MAC\_Jet-Hot\_Coated\_Headers.jpg](http://home.comcast.net/~jsaccani/MAC_Jet-Hot_Coated_Headers.jpg)
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [June 26, 2004, 10:00am UTC](https://forums.speedlife.net/t/more-parts/167378/2 "2004-06-26T10:00:17Z")
why is there 3 headers 🤣😉
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [June 26, 2004, 10:00am UTC](https://forums.speedlife.net/t/more-parts/167378/3 "2004-06-26T10:00:58Z")
> [@Shaggy](#):
>
> why is there 3 headers 🤣😉
Oh no! I need 2 more cylinders now.
---
### Author:  [@VictorSmalls](https://forums.speedlife.net/u/VictorSmalls)
#### Post date: [June 26, 2004, 10:01am UTC](https://forums.speedlife.net/t/more-parts/167378/4 "2004-06-26T10:01:24Z")
Looking great Jeff. You putting them on or you taking the beast up to JJ’s?
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [June 26, 2004, 10:03am UTC](https://forums.speedlife.net/t/more-parts/167378/5 "2004-06-26T10:03:46Z")
> [@VictorSmalls](#):
>
> Looking great Jeff. You putting them on or you taking the beast up to JJ’s?
I’m going to try it. I like to try things myself unless I know I don’t have a chance, even if it takes forever (remember the deck project? and i knew what I was doing on that one) I have a feeling I’ll be calling JJs for a tow sometime during the project.
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [June 26, 2004, 10:04am UTC](https://forums.speedlife.net/t/more-parts/167378/6 "2004-06-26T10:04:10Z")
WTF is this
also MAC is Poop :boink
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [June 26, 2004, 10:07am UTC](https://forums.speedlife.net/t/more-parts/167378/7 "2004-06-26T10:07:34Z")
Nevermind Single Exaust :kekegay:
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [June 26, 2004, 10:07am UTC](https://forums.speedlife.net/t/more-parts/167378/8 "2004-06-26T10:07:44Z")
Directions say to leave a piece of the pipe coming off the stock cat and weld that to it. I don’t have a stock cat so I may not need it (my Borla y-pipe bolts right to the cat). Or I may have a problem.
I thought about long tubes or the AS&M mids, but for the $$ and the good plug access I decided on the MACs. Should be more than enough to support my power level.
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [June 26, 2004, 10:17am UTC](https://forums.speedlife.net/t/more-parts/167378/9 "2004-06-26T10:17:13Z")
I bet 8.1 tells me to:
get it done!!!
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [June 26, 2004, 10:19am UTC](https://forums.speedlife.net/t/more-parts/167378/10 "2004-06-26T10:19:37Z")
> [@Jeff95TA](#):
>
> Directions say to leave a piece of the pipe coming off the stock cat and weld that to it. I don’t have a stock cat so I may not need it (my Borla y-pipe bolts right to the cat). Or I may have a problem.
>
> I thought about long tubes or the AS&M mids, but for the $$ and the good plug access I decided on the MACs. Should be more than enough to support my power level.
yeah mac arent really that bad ( headers,Prochamber Pipe ), Just the mufflers i have are annoying 🤣
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [June 26, 2004, 10:22am UTC](https://forums.speedlife.net/t/more-parts/167378/11 "2004-06-26T10:22:51Z")
poop
shouldofgot
longtubes