# Motorcycle Inspection **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [June 22, 2008, 9:16am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412 "2008-06-22T09:16:23Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![longuyen88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/longuyen88/32/7611_2.png) [@longuyen88](https://forums.speedlife.net/u/longuyen88)\ **Post date:** [June 22, 2008, 9:16am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/1 "2008-06-22T09:16:23Z")
I want to know where to get one. I want to know if motorcycle inspections are any different than a car inspection. I also need a few hookups because I have a fender eliminator, flush mounts, and a cracked headlight. :snky: Thanks in advance! ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [June 22, 2008, 9:23am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/2 "2008-06-22T09:23:32Z")
freewheeling… they always take care of me there… ---
**Author:** ![Slomies](https://avatars.discourse-cdn.com/v4/letter/s/ee7513/32.png) [@Slomies](https://forums.speedlife.net/u/Slomies)\ **Post date:** [June 22, 2008, 9:23am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/3 "2008-06-22T09:23:59Z")
With the fender eliminator kit, you’ll be fine, as long as you have your plate mounted somewhere visible Flush mounts are ok, as long as they work obviously. I’m not sure about the headlight because it’s cracked, but I think you’ll be ok as long as the bulb still works ---
**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\ **Post date:** [June 22, 2008, 9:25am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/4 "2008-06-22T09:25:14Z")
fender eliminator is no problem, flush mounts are no problem so long as they work and headlight as long as it works is fine. freewheeling did mine on military. ---
**Author:** ![rdandy5875](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rdandy5875/32/7511_2.png) [@rdandy5875](https://forums.speedlife.net/u/rdandy5875)\ **Post date:** [June 22, 2008, 9:33am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/5 "2008-06-22T09:33:01Z")
+1 freewheeling, call them though because some hours/days they don’t do it. ---
**Author:** ![BadnewsMike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/badnewsmike/32/7419_2.png) [@BadnewsMike](https://forums.speedlife.net/u/BadnewsMike)\ **Post date:** [June 22, 2008, 9:36am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/6 "2008-06-22T09:36:26Z")
location? I use a shop in NT, there nice guys…use them alot. if i went with you im sure they wouldnt give you any problems. also check your forks for leaks but otherwise alot like a car inspection, if you see a sign for motorcycle inspection it usally is near the car one, a shop can do it… ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [June 22, 2008, 9:37am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/7 "2008-06-22T09:37:48Z")
SAC RACING is another possibility. +1 to call ahead at freewheeling, cuz they require appointments ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [June 22, 2008, 9:38am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/8 "2008-06-22T09:38:04Z")
what bike did you buy? ---
**Author:** ![Avatar](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/avatar/32/5076_2.png) [@Avatar](https://forums.speedlife.net/u/Avatar)\ **Post date:** [June 22, 2008, 9:55am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/9 "2008-06-22T09:55:17Z")
I just go to Hamburg Honda. They went over my bike in about 2 minutes. Checked tires, lights, horn, complimented my fender eliminator and off I went. They didn’t even start it. ---
**Author:** ![KuntryQuestTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kuntryquesttsi/32/5010_2.png) [@KuntryQuestTSi](https://forums.speedlife.net/u/KuntryQuestTSi)\ **Post date:** [June 22, 2008, 1:01pm UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/10 "2008-06-22T13:01:23Z")
you need good tires all lights working good brake pads a horn of some sort pretty much anywhere will pass you ---
**Author:** ![Oroc](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@Oroc](https://forums.speedlife.net/u/Oroc)\ **Post date:** [June 22, 2008, 2:56pm UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/11 "2008-06-22T14:56:18Z")
went to don georges, no problem, i have a fender elim as well ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [June 22, 2008, 3:03pm UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/12 "2008-06-22T15:03:13Z")
what if you don’t have mirrors or a speedometer? ---
**Author:** ![mechanicalmadness](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mechanicalmadness/32/5022_2.png) [@mechanicalmadness](https://forums.speedlife.net/u/mechanicalmadness)\ **Post date:** [June 22, 2008, 3:05pm UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/13 "2008-06-22T15:05:29Z")
There is a place across the street from Kustom works on Transit rd. Cant remember what its called but they repair or sell or whatever bobcats and other heavy equipment. They do bike inspections. Got mine done there with no prob. the dude even topped off my tire. ---
**Author:** ![longuyen88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/longuyen88/32/7611_2.png) [@longuyen88](https://forums.speedlife.net/u/longuyen88)\ **Post date:** [June 22, 2008, 5:47pm UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/14 "2008-06-22T17:47:16Z")
> [@badnewsmini](#): > > location? > I use a shop in NT, there nice guys…use them alot. if i went with you im sure they wouldnt give you any problems. > > also check your forks for leaks but otherwise alot like a car inspection, if you see a sign for motorcycle inspection it usally is near the car one, a shop can do it… you wouldn’t mind going with me tues. morning would you? btw, I have an 05 blue r6 ---
**Author:** ![KuntryQuestTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kuntryquesttsi/32/5010_2.png) [@KuntryQuestTSi](https://forums.speedlife.net/u/KuntryQuestTSi)\ **Post date:** [June 23, 2008, 5:06am UTC](https://forums.speedlife.net/t/motorcycle-inspection/50412/15 "2008-06-23T05:06:27Z")
my 58 pan head has a bicycle horn i put on to pass inspection, i have no speedo or even tach you may need one sort of mirror