# Mount for B-series hydro tranny in automatic eg chassis
**URL:** https://forums.speedlife.net/t/mount-for-b-series-hydro-tranny-in-automatic-eg-chassis/209108
**Category:** Classifieds
**Created:** [February 12, 2011, 6:48am UTC](https://forums.speedlife.net/t/mount-for-b-series-hydro-tranny-in-automatic-eg-chassis/209108 "2011-02-12T06:48:23Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)
#### Post date: [February 12, 2011, 6:48am UTC](https://forums.speedlife.net/t/mount-for-b-series-hydro-tranny-in-automatic-eg-chassis/209108/1 "2011-02-12T06:48:23Z")
title says it all. Need a tranny mount to put a b-series motor into an eg which was originally an auto chassis. Honda does not make this mount, so it has to be an aftermarket mount to avoid possible confusion. Shoot me a pm if you got one, I got cash in hand for it.
---
### Author:  [@fv8s](https://forums.speedlife.net/u/fv8s)
#### Post date: [February 12, 2011, 8:45am UTC](https://forums.speedlife.net/t/mount-for-b-series-hydro-tranny-in-automatic-eg-chassis/209108/2 "2011-02-12T08:45:06Z")
I can source a manual mount bracket I can drill out and you can weld on. And a stock trans mount I can just give you.
---
### Author:  [@esford90](https://forums.speedlife.net/u/esford90)
#### Post date: [February 12, 2011, 8:13pm UTC](https://forums.speedlife.net/t/mount-for-b-series-hydro-tranny-in-automatic-eg-chassis/209108/3 "2011-02-12T20:13:07Z")
i also have a manual eg b series trans mount
---
### Author:  [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)
#### Post date: [February 13, 2011, 4:08am UTC](https://forums.speedlife.net/t/mount-for-b-series-hydro-tranny-in-automatic-eg-chassis/209108/4 "2011-02-13T04:08:59Z")
Thanks guys, but i really just wanna get the aftermarket mount. I had a junker I could have cut it out of an rewelded to this, but IMO, that’s a lot of work just to save $120 for a new mount. I actually already have the b-series motor in the car and really don’t feel like taking it out to do a proper job cutting/welding. Guess I’ll bite the bullet and spend the $$ on monday if no one has one on here. I do appreciate the offer though.