# mounting boost gauge??????????

**URL:** <https://forums.speedlife.net/t/mounting-boost-gauge/143523>\
**Category:** Canada Nissan Automotive\
**Created:** [July 27, 2006, 9:51pm UTC](https://forums.speedlife.net/t/mounting-boost-gauge/143523 "2006-07-27T21:51:20Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![gts-4-door](https://avatars.discourse-cdn.com/v4/letter/g/dec6dc/32.png) [@gts-4-door](https://forums.speedlife.net/u/gts-4-door)\
**Post date:** [July 27, 2006, 9:51pm UTC](https://forums.speedlife.net/t/mounting-boost-gauge/143523/1 "2006-07-27T21:51:20Z")

</div>

i was thinking of getting rid or the little air vent on the drivers side but i dont know if i will do that any one else got some ideas???  
kevin

---

<div class="post-metadata">

**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\
**Post date:** [July 27, 2006, 10:58pm UTC](https://forums.speedlife.net/t/mounting-boost-gauge/143523/2 "2006-07-27T22:58:30Z")

</div>

i made a90 degree angle out of a pice of thin aluminium and put it in between my steering wheel and the dash(when u tilt the steering wheel down stick it between there and then tilt it back up,clamps it in great ,works perfect as long as the gauge isnt too big to see your speedo or tach.mine covers my high beam indicator but better than cutting or buying gauge pods.

---

<div class="post-metadata">

**Author:** ![the.k.w.c](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@the.k.w.c](https://forums.speedlife.net/u/the.k.w.c)\
**Post date:** [July 28, 2006, 6:29pm UTC](https://forums.speedlife.net/t/mounting-boost-gauge/143523/3 "2006-07-28T18:29:31Z")

</div>

cut out the lighter and make the hole bigger to fit it

---

<div class="post-metadata">

**Author:** ![CA18DET-180SX](https://avatars.discourse-cdn.com/v4/letter/c/e0b2c6/32.png) [@CA18DET-180SX](https://forums.speedlife.net/u/CA18DET-180SX)\
**Post date:** [July 28, 2006, 11:44pm UTC](https://forums.speedlife.net/t/mounting-boost-gauge/143523/4 "2006-07-28T23:44:41Z")

</div>

I have a gauge surround from an SRT-4 that I I’m gonna mod up and mount just below my original gauges at the very front of the kick panel, so it has the out of the way look.

---

<div class="post-metadata">

**Author:** ![Studlife](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@Studlife](https://forums.speedlife.net/u/Studlife)\
**Post date:** [August 3, 2006, 10:56pm UTC](https://forums.speedlife.net/t/mounting-boost-gauge/143523/5 "2006-08-03T22:56:28Z")

</div>

i had a boost gauge in my Gtst in the same spot i liked it was well out of sight