# MR Coilover Install

**URL:** <https://forums.speedlife.net/t/mr-coilover-install/84856>\
**Category:** SON240sx Automotive\
**Created:** [April 8, 2005, 5:12pm UTC](https://forums.speedlife.net/t/mr-coilover-install/84856 "2005-04-08T17:12:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stock240](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Stock240](https://forums.speedlife.net/u/Stock240)\
**Post date:** [April 8, 2005, 5:12pm UTC](https://forums.speedlife.net/t/mr-coilover-install/84856/1 "2005-04-08T17:12:23Z")

</div>

R the HICAS sway bars gonna be any kind of problem with installation of these?

---

<div class="post-metadata">

**Author:** ![Axlerod](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Axlerod](https://forums.speedlife.net/u/Axlerod)\
**Post date:** [April 8, 2005, 5:22pm UTC](https://forums.speedlife.net/t/mr-coilover-install/84856/2 "2005-04-08T17:22:00Z")

</div>

No, just make sure you jack up both sides at the same time when installing 😉

---

<div class="post-metadata">

**Author:** ![Stock240](https://avatars.discourse-cdn.com/v4/letter/s/a698b9/32.png) [@Stock240](https://forums.speedlife.net/u/Stock240)\
**Post date:** [April 8, 2005, 5:24pm UTC](https://forums.speedlife.net/t/mr-coilover-install/84856/3 "2005-04-08T17:24:48Z")

</div>

Thank U. That should solve all problems then??? Everything else is straight forward?

---

<div class="post-metadata">

**Author:** ![Axlerod](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Axlerod](https://forums.speedlife.net/u/Axlerod)\
**Post date:** [April 8, 2005, 5:29pm UTC](https://forums.speedlife.net/t/mr-coilover-install/84856/4 "2005-04-08T17:29:15Z")

</div>

> [@Stock240](#):
>
> Thank U. That should solve all problems then??? Everything else is straight forward?

It’s basically just a bolt in… have you made sure the springs are snug and they’re both the same height? You set camber afterwards.