# Mustang, evo question?
**URL:** https://forums.speedlife.net/t/mustang-evo-question/18794
**Category:** NYSpeed Automotive
**Created:** [October 12, 2006, 8:39am UTC](https://forums.speedlife.net/t/mustang-evo-question/18794 "2006-10-12T08:39:51Z")
**Posts on this page:** 9
**Page:** 1
### Author:  [@BadnewsMike](https://forums.speedlife.net/u/BadnewsMike)
#### Post date: [October 12, 2006, 8:39am UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/1 "2006-10-12T08:39:51Z")
ok you all can hate me for this, But a friend of mine has stock 17" mustang wheels he will pritty much give to me. I was thinking I could use them on the evo for winter wheels
(just incase I newman into a curb)
My quetion is will the stang wheels fit (offset/brake clearance) on the Evo? (I belive there both 5x4.5. right?)
---
### Author:  [@RobHimself](https://forums.speedlife.net/u/RobHimself)
#### Post date: [October 12, 2006, 8:41am UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/2 "2006-10-12T08:41:20Z")
I dont think those will clear the brakes. Im not positive though.
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [October 12, 2006, 8:42am UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/3 "2006-10-12T08:42:08Z")
> (just incase I newman into a curb)
LOL!!!
probably wont clear the brakes.
(for the record)
i think your wheels are 114.5PCD 17X8 ET38
---
### Author:  [@EvoMR](https://forums.speedlife.net/u/EvoMR)
#### Post date: [October 12, 2006, 9:11am UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/4 "2006-10-12T09:11:42Z")
I have heard that the 03-04 cobra wheels fit. Can’t verify personally though.
---
### Author:  [@JaysGreenLX](https://forums.speedlife.net/u/JaysGreenLX)
#### Post date: [October 12, 2006, 9:15am UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/5 "2006-10-12T09:15:36Z")
> [@EvoMR](#):
>
> I have heard that the 03-04 cobra wheels fit. Can’t verify personally though.
Assuming that 3000GTs use the same bolt pattern and offset as the Evo, that is true. Jack used to have 03 Cobra wheels on his 3GGT
---
### Author:  [@EvoMR](https://forums.speedlife.net/u/EvoMR)
#### Post date: [October 12, 2006, 9:49am UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/6 "2006-10-12T09:49:56Z")
This look to confirm it: [http://forums.evolutionm.net/showthread.php?t=80889](http://forums.evolutionm.net/showthread.php?t=80889)
---
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [October 12, 2006, 3:41pm UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/7 "2006-10-12T15:41:47Z")
> [@JaysGreenLX](#):
>
> Assuming that 3000GTs use the same bolt pattern and offset as the Evo, that is true. Jack used to have 03 Cobra wheels on his 3GGT
:word: teh hottness.
Then everyone did it 😉
---
### Author:  [@neurokinetik](https://forums.speedlife.net/u/neurokinetik)
#### Post date: [October 12, 2006, 3:57pm UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/8 "2006-10-12T15:57:32Z")
I didn’t even realize those were Mustang wheels. They looked great on that car… :tup:
---
### Author:  [@Rx3](https://forums.speedlife.net/u/Rx3)
#### Post date: [October 12, 2006, 4:07pm UTC](https://forums.speedlife.net/t/mustang-evo-question/18794/9 "2006-10-12T16:07:31Z")
Depends on which mustang. If the wheels are from a 94-03 Mustang Cobra, then yes they will fit, as the offsets are ~+25mm. Also the '03 and '00 (I think?) SVT Cobra Wheels will also fit.
Bolt pattern is the same as the EVO, and they will clear the brake calipers with no problems at all.
The same applies if you have a DSM (2G or 1G).
Just for reference, I think the stock EVO wheel offset is approx +35mm offset give or take. So anything matching that or lower should be fine. If you run a wheel lower than +25mm offset, I would suggest getting longer wheel studs.
Any of the other Mustang wheels (the V6, etc), stay away from.