# Mustang guy from Monessen
**URL:** https://forums.speedlife.net/t/mustang-guy-from-monessen/183899
**Category:** PittSpeed Off Topic
**Created:** [July 29, 2006, 4:35pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899 "2006-07-29T16:35:46Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@cam303](https://forums.speedlife.net/u/cam303)
#### Post date: [July 29, 2006, 4:35pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/1 "2006-07-29T16:35:46Z")
I have looked at the site every once in a while but since steelcity is down I decided to join. I see a lot of familiar names here.
---
### Author:  [@berad](https://forums.speedlife.net/u/berad)
#### Post date: [July 29, 2006, 4:39pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/2 "2006-07-29T16:39:18Z")
welcome. and yes, there are quite a few mustnag people on here.
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [July 29, 2006, 4:49pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/3 "2006-07-29T16:49:13Z")
welcome
---
### Author:  [@traydogg6969](https://forums.speedlife.net/u/traydogg6969)
#### Post date: [July 29, 2006, 5:22pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/4 "2006-07-29T17:22:23Z")
welcome
---
### Author:  [@Dominator](https://forums.speedlife.net/u/Dominator)
#### Post date: [July 29, 2006, 5:56pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/5 "2006-07-29T17:56:53Z")
sup man
---
### Author:  [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)
#### Post date: [July 29, 2006, 6:24pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/6 "2006-07-29T18:24:48Z")
welcome over
---
### Author:  [@DTMVENG24](https://forums.speedlife.net/u/DTMVENG24)
#### Post date: [July 29, 2006, 6:47pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/7 "2006-07-29T18:47:29Z")
Welcome.
---
### Author:  [@imported\_Sleeper](https://forums.speedlife.net/u/imported_Sleeper)
#### Post date: [July 29, 2006, 6:58pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/8 "2006-07-29T18:58:58Z")
Wwelcome,what year adn mods and so fourth?
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [July 29, 2006, 9:32pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/9 "2006-07-29T21:32:15Z")
Welcome.
---
### Author:  [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)
#### Post date: [July 29, 2006, 9:38pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/10 "2006-07-29T21:38:18Z")
welcome
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [July 30, 2006, 6:11am UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/11 "2006-07-30T06:11:35Z")
welcome:beer:
---
### Author:  [@scott5](https://forums.speedlife.net/u/scott5)
#### Post date: [July 30, 2006, 9:44am UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/12 "2006-07-30T09:44:22Z")
welcome
---
### Author:  [@cam303](https://forums.speedlife.net/u/cam303)
#### Post date: [July 30, 2006, 3:42pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/13 "2006-07-30T15:42:22Z")
> [@SleeperGTP](#):
>
> Wwelcome,what year adn mods and so fourth?
It is a 93LX hatch that I am the original owner of. It has a 331 with TEA ported 205cc twisted wedge heads, TFS box-R intake, TFS stage 3 cam. Plus all the other normal supporting mods.
The best run so far this year is an 11.01@123.79 at prp.
I just got the heads and intake back from TEA where I had the intake port matched and the heads milled down to increase the compression from 9.89:1 to 11.24:1. I also had there new valve job done that is supposed to increase flow 10cfm and had titanium retainers installed becausethere were signs of valve float.
With these mods and the addition of a 90mm t-body to replace the 75mm I am hoping to see solid 10 sec. et’s at over 126 mph…N/A
---
### Author:  [@cam303](https://forums.speedlife.net/u/cam303)
#### Post date: [July 30, 2006, 3:46pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/14 "2006-07-30T15:46:30Z")
:bigthumb:
> [@Domination](#):
>
> sup man
Jay, The roll bar turned out great. Thanks for a great job!
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [July 30, 2006, 3:51pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/15 "2006-07-30T15:51:37Z")
welcome man
---
### Author:  [@imported\_Sleeper](https://forums.speedlife.net/u/imported_Sleeper)
#### Post date: [July 30, 2006, 3:59pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/16 "2006-07-30T15:59:16Z")
cool…
---
### Author:  [@Laura00WS6](https://forums.speedlife.net/u/Laura00WS6)
#### Post date: [July 30, 2006, 8:16pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/17 "2006-07-30T20:16:29Z")
welcome
---
### Author:  [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)
#### Post date: [July 30, 2006, 9:06pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/18 "2006-07-30T21:06:04Z")
what’s up Chris?
---
### Author:  [@4doors5gears](https://forums.speedlife.net/u/4doors5gears)
#### Post date: [July 30, 2006, 9:47pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/19 "2006-07-30T21:47:48Z")
Welcome… This place is polluted with F-Bodies, needs to have some more Mustang support haha
---
### Author:  [@cam303](https://forums.speedlife.net/u/cam303)
#### Post date: [July 31, 2006, 4:33pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/20 "2006-07-31T16:33:46Z")
> [@2002SilverWS-6](#):
>
> what’s up Chris?
Hello dean.
[Next page](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899.md?page=2)