# Mustang guy from Monessen **URL:** https://forums.speedlife.net/t/mustang-guy-from-monessen/183899 **Category:** PittSpeed Off Topic **Created:** [July 29, 2006, 4:35pm UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899 "2006-07-29T16:35:46Z") **Posts on this page:** 1 **Showing post:** 27
### Author: ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS) #### Post date: [November 19, 2006, 8:05am UTC](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899/27 "2006-11-19T08:05:45Z")
> [@cool beer bottle trick](https://forums.speedlife.net/t/cool-beer-bottle-trick/23336/5): > > It is a 93LX hatch that I am the original owner of. It has a 331 with TEA ported 205cc twisted wedge heads, TFS box-R intake, TFS stage 3 cam. Plus all the other normal supporting mods. > The best run so far this year is an 11.01@123.79 at prp. > I just got the heads and intake back from TEA where I had the intake port matched and the heads milled down to increase the compression from 9.89:1 to 11.24:1. I also had there new valve job done that is supposed to increase flow 10cfm and had titanium retainers installed becausethere were signs of valve float. > With these mods and the addition of a 90mm t-body to replace the 75mm I am hoping to see solid 10 sec. et’s at over 126 mph…N/A Sounds nice…welcome --- _[View the full topic](https://forums.speedlife.net/t/mustang-guy-from-monessen/183899)._