# mustang guys i need help

**URL:** <https://forums.speedlife.net/t/mustang-guys-i-need-help/36524>\
**Category:** NYSpeed Automotive\
**Created:** [October 5, 2007, 3:45pm UTC](https://forums.speedlife.net/t/mustang-guys-i-need-help/36524 "2007-10-05T15:45:57Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![Shifty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shifty/32/4959_2.png) [@Shifty](https://forums.speedlife.net/u/Shifty)\
**Post date:** [October 7, 2007, 11:20am UTC](https://forums.speedlife.net/t/mustang-guys-i-need-help/36524/15 "2007-10-07T11:20:25Z")

</div>

[quote=“LXTASY,post:2,topic:36524"”]

Did you pull the spout connector to do so? Did you replace it?

.

[/quote]

Car can still run without it. You’ll just lose your timing curve.

Make sure #1 is TDC (you might be 180 degrees off), at the same time make sure the distributor is pointing at #1 on the cap. Then double check that all spark plug wires are in the correct firing order. Your coil should be a 1 plug deal, also with the control module.

Does it have an aftermarket ignition (ie. MSD) or is it still stock??

---

_[View the full topic](https://forums.speedlife.net/t/mustang-guys-i-need-help/36524)._