# Mustang ppl, help a brotha out with some answers **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [September 26, 2006, 12:13pm UTC](https://forums.speedlife.net/t/mustang-ppl-help-a-brotha-out-with-some-answers/18047 "2006-09-26T12:13:57Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Shifty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shifty/32/4959_2.png) [@Shifty](https://forums.speedlife.net/u/Shifty)\ **Post date:** [September 26, 2006, 12:42pm UTC](https://forums.speedlife.net/t/mustang-ppl-help-a-brotha-out-with-some-answers/18047/4 "2006-09-26T12:42:31Z")
you should look into '99 cobra’s & up especially '03-'04 Cobras which are 4.6 DOHC 32V easy 700+hp when replacing their intake with a '01 & using a turbo setup **900 rwhp / 744 rwtq ('99 Cobra) - Race Fuel 786rwhp / 689rwtq @ 16psi ('04 Cobra) 740 rwhp / 700 rwtq ('03 Cobra) - Pump Gas 540 rwhp / 519 rwtq (stock '97 Cobra) - Pump Gas 488 rwhp / 570 rwtq (stock '03 Saleen GT) - Pump Gas 468 rwhp / 555 rwtq (stock '00 GT) - Pump Gas** [left] **For expample:** **![http://www.turbochargedpower.com/images/Middlesworth%20Cobra%20Side.jpg](http://www.turbochargedpower.com/images/Middlesworth%20Cobra%20Side.jpg)** **900 rwhp and 744 rwtq** [/left] [indent][indent][indent][font=Arial][size=4]**Jaime Middlesworth’s 1998 Cobra HP Performance Stage III Twin Turbo Kit** [left] **\* HP Stage III Twinturbo kit with twin 66mm turbos** - Stock block, crank, good rods, and 8.5:1 compression forged pistons - Ported stock heads, with Crane regrind cams - Hamilton Clark Intake - 72# injectors - Aeromotive A1000 fuel pump - Stock electronics with a Diablo chip [/left] [/indent][/indent][/indent][/size][/font] --- _[View the full topic](https://forums.speedlife.net/t/mustang-ppl-help-a-brotha-out-with-some-answers/18047)._