# my 71 honda cb350 bobber build......(finished pics pg 7)

**URL:** <https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845>\
**Category:** Builds\
**Created:** [November 26, 2008, 11:23pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845 "2008-11-26T23:23:00Z")\
**Posts on this page:** 20\
**Page:** 8

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [February 21, 2009, 10:00pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/141 "2009-02-21T22:00:44Z")

</div>

well, got some work done on the bike. I had a spare chain from the cb350 and it appeared to be the same size so i chopped it and added it to the cb450 chain to get the length i needed. I slipped on the exhaust that came with the bike but im thinking they kinda suck. Im kinda getting tired of building this thing and im trying to avoid having to invest too much time/money into this project.

 ![http://img.photobucket.com/albums/v371/turbociv/downsized_0222090021.jpg](http://img.photobucket.com/albums/v371/turbociv/downsized_0222090021.jpg)

chain is a little bit notchier then i had hoped. I did my best in aligning everything so only time will tell now.

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [February 28, 2009, 9:44pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/142 "2009-02-28T21:44:17Z")

</div>

updates…

ok, i was waiting on some universal forward controls that i bought of ebay for 100bucs. I removed the front motor mount plates and welded tube to the plate and then a thivk wide washer to the end and drilled the proper hole to enter the bolt through to the controls to thread on to.

painted them rustolium semi flat black and installed them on the bike. here is what they look like.

![http://img.photobucket.com/albums/v371/turbociv/downsized_0301090032.jpg](http://img.photobucket.com/albums/v371/turbociv/downsized_0301090032.jpg)

![http://img.photobucket.com/albums/v371/turbociv/downsized_0301090032a.jpg](http://img.photobucket.com/albums/v371/turbociv/downsized_0301090032a.jpg)

now i can chop off and unbolt the stock foot pegs. Now i need to fab up some linkages for my controls.

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [March 1, 2009, 8:34am UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/143 "2009-03-01T08:34:00Z")

</div>

I don’t know what you plan to do for the factory foot pegs…But I can tell you what I did when I ditched mine and how I made linkages.

I unbolted the foot pegs, and cit the pegs off the big fat round mounting point, and then used a bench grinder to make that smooth and round like a huge ass washer, and then bolted them back on…I’ll try to snap a pic of them when I run to the shop in a couple hours.

as for linkages, I turned the stock shifter straight down, and cut it in half. then I drilled a hole and tapped it, and used one of those “i”-hook deals where they are threaded into a bracket and one side is reverse threaded…and I took out the normal threaded i-hook and welded more threaded rod to it for desired lenght and then just used a bolt with a small nylon bushing to allow the i-hooks to move freely

---

<div class="post-metadata">

**Author:** ![mechanicalmadness](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mechanicalmadness/32/5022_2.png) [@mechanicalmadness](https://forums.speedlife.net/u/mechanicalmadness)\
**Post date:** [March 1, 2009, 9:28am UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/144 "2009-03-01T09:28:03Z")

</div>

Good job man. Coming along nicely. Just wondering though. What are you using to bend the piping?

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [March 5, 2009, 11:28am UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/145 "2009-03-05T11:28:34Z")

</div>

> [@mechanicalmadness](#):
>
> Good job man. Coming along nicely. Just wondering though. What are you using to bend the piping?

the pipes im using are prebent.

ok,. some more updates. it was fucking beautiful outside so i had to get something done.

i fabed up and made the linkage for my forward control gear shifter thingy.lol

works just as planned, just some grinding/cutting/welding like everything else. next ill tackle the rear breaks side of the project. hopefully tommorow.

![http://img.photobucket.com/albums/v371/turbociv/downsized_0305091418.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/f/df0b73811976b4467671c83cac17ea73d19bd11d.jpeg)

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [March 14, 2009, 10:53pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/146 "2009-03-14T22:53:12Z")

</div>

well, got to work on the bike a little tonight. im getting tired of working on this thing but the end is almost near. here are a couple pics of the completed forward controls and some downpipes i built since the old pipes wouldnt clear with the forward controls.  
Im planning on wrapping the pipes and leaving the tips exposed. Not sure if they arent long enough but i realy dont want alot of pipe to be honest. less is more imho. meh

![http://img.photobucket.com/albums/v371/turbociv/downsized_0315090136.jpg](http://img.photobucket.com/albums/v371/turbociv/downsized_0315090136.jpg)

![http://img.photobucket.com/albums/v371/turbociv/downsized_0315090135.jpg](http://img.photobucket.com/albums/v371/turbociv/downsized_0315090135.jpg)

---

<div class="post-metadata">

**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\
**Post date:** [March 15, 2009, 1:46am UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/147 "2009-03-15T01:46:09Z")

</div>

get race car ready, build one of these. Damn I’m gunna be busy.

Looks nice man, now you just need some baller powdercoating.

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [March 15, 2009, 4:40pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/148 "2009-03-15T16:40:20Z")

</div>

fired it up today, and was runnin on 1 cyl.☹ so i plaid around with the points adjustments again and i got both cylinders fireing again. sounds loud with the straight pipes but kinda gay at high rpms.lol Its a 450 honda,lol not a 1300cc harley.😃

i need to do some painting now and finish up some loose ends, then hopefuly some hairy burnouts.

uhmmm, the bike needs to have the carbs adjusted as well, doesnt like to stay running after high rpms, but will idle all day. seams to smell rich which doesnt make sense since i cut off the exhaust and removed the airbox.

---

<div class="post-metadata">

**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\
**Post date:** [March 16, 2009, 9:22am UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/149 "2009-03-16T09:22:27Z")

</div>

1.got dirty working on the bike  
2.smoke alot of reds  
3.ripped 1st-3rd on your bumpy road  
4.wings at the pub…

we are turning into bikers jon

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [March 16, 2009, 12:10pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/150 "2009-03-16T12:10:50Z")

</div>

I know, i need to work on my gut and beard though. Maybe get a leather vest. who knows what the future holds.

---

<div class="post-metadata">

**Author:** ![DR.PUCH](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dr.puch/32/5237_2.png) [@DR.PUCH](https://forums.speedlife.net/u/DR.PUCH)\
**Post date:** [March 18, 2009, 5:58pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/151 "2009-03-18T17:58:50Z")

</div>

tank in primer ![http://img9.imageshack.us/img9/5996/img00176.jpg](http://img9.imageshack.us/img9/5996/img00176.jpg)

![http://img4.imageshack.us/img4/4617/img00177.jpg](http://img4.imageshack.us/img4/4617/img00177.jpg)

---

<div class="post-metadata">

**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\
**Post date:** [March 18, 2009, 6:10pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/152 "2009-03-18T18:10:03Z")

</div>

thats smoooth dr puch

---

<div class="post-metadata">

**Author:** ![JDMSIR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmsir/32/7376_2.png) [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)\
**Post date:** [March 18, 2009, 7:23pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/153 "2009-03-18T19:23:00Z")

</div>

Sweet, looking good. In for vids of burnouts.

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [March 18, 2009, 11:12pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/154 "2009-03-18T23:12:34Z")

</div>

> [@sLONISMO](#):
>
> tank in primer

thanks.🙂

> [@JDMSIR](#):
>
> Sweet, looking good. In for vids of burnouts.

very soon, i can taste the burning rubber now.😃

---

<div class="post-metadata">

**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\
**Post date:** [March 19, 2009, 7:53am UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/155 "2009-03-19T07:53:11Z")

</div>

wings at the pub FTW. looks good john that thing has to be loud as fuck with the pipes pointed at the ground at the same point your ears are. The sound must bounce up pretty good

---

<div class="post-metadata">

**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\
**Post date:** [March 19, 2009, 8:32am UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/156 "2009-03-19T08:32:18Z")

</div>

> [@Carnut](#):
>
> wings at the pub FTW. looks good john that thing has to be loud as fuck with the pipes pointed at the ground at the same point your ears are. The sound must bounce up pretty good

yea, im sure it will get annoying, we actually added a couple 90’s i had left over from my manifold pointing it outand to the side, so it shouldnt be too bad. Bike should be up and running this weekend all finished up. painting the frame and parts now and waiting for tank still.🙂

---

<div class="post-metadata">

**Author:** ![DR.PUCH](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dr.puch/32/5237_2.png) [@DR.PUCH](https://forums.speedlife.net/u/DR.PUCH)\
**Post date:** [March 19, 2009, 7:51pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/157 "2009-03-19T19:51:00Z")

</div>

well here’s the finished product  
DuPont Black , with Copper Pearl … 😃 enjoy

![http://img22.imageshack.us/img22/8341/paint122.jpg](http://img22.imageshack.us/img22/8341/paint122.jpg)

![http://img23.imageshack.us/img23/8759/paint119.jpg](http://img23.imageshack.us/img23/8759/paint119.jpg)

![http://img6.imageshack.us/img6/7608/paint117.jpg](http://img6.imageshack.us/img6/7608/paint117.jpg)

![http://img25.imageshack.us/img25/3194/paint113.jpg](http://img25.imageshack.us/img25/3194/paint113.jpg)

---

<div class="post-metadata">

**Author:** ![bigtymer7463](https://avatars.discourse-cdn.com/v4/letter/b/7ab992/32.png) [@bigtymer7463](https://forums.speedlife.net/u/bigtymer7463)\
**Post date:** [March 19, 2009, 8:08pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/158 "2009-03-19T20:08:19Z")

</div>

dope.

---

<div class="post-metadata">

**Author:** ![streetglow116](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/streetglow116/32/5202_2.png) [@streetglow116](https://forums.speedlife.net/u/streetglow116)\
**Post date:** [March 19, 2009, 8:13pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/159 "2009-03-19T20:13:57Z")

</div>

shit son

---

<div class="post-metadata">

**Author:** ![Tim](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tim/32/5211_2.png) [@Tim](https://forums.speedlife.net/u/Tim)\
**Post date:** [March 19, 2009, 8:29pm UTC](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845/160 "2009-03-19T20:29:27Z")

</div>

looks awesome :tup:

[Previous page](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845.md?page=7)

[Next page](https://forums.speedlife.net/t/my-71-honda-cb350-bobber-build-finished-pics-pg-7/58845.md?page=9)
