# MY 88mm Turbo car
**URL:** https://forums.speedlife.net/t/my-88mm-turbo-car/74546
**Category:** NYSpeed Automotive
**Created:** [October 7, 2009, 5:54pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546 "2009-10-07T17:54:04Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@2stangs8689](https://forums.speedlife.net/u/2stangs8689)
#### Post date: [October 7, 2009, 5:54pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/1 "2009-10-07T17:54:04Z")
Not on here much, but here’s my pig of a car, we’ll get a handle on it soon. :ohyeah:
---
### Author:  [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [October 7, 2009, 6:01pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/2 "2009-10-07T18:01:26Z")
Nice man :tup:
---
### Author:  [@mindless](https://forums.speedlife.net/u/mindless)
#### Post date: [October 7, 2009, 6:22pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/3 "2009-10-07T18:22:03Z")
OH MY GOD. Amazing man.
---
### Author:  [@MrSmith](https://forums.speedlife.net/u/MrSmith)
#### Post date: [October 7, 2009, 6:22pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/4 "2009-10-07T18:22:24Z")
The second pass is a thing of beauty leaves super smooth and goes dead straight. Looks like you have it dialed in. Too much boost leaving on that last pass?
You have a spare 88mm and an automatic to donate to the Smith foundation?
:tup:
---
### Author:  [@2stangs8689](https://forums.speedlife.net/u/2stangs8689)
#### Post date: [October 7, 2009, 6:27pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/5 "2009-10-07T18:27:32Z")
Same set up, lifted better on first wheelie…lol.
---
### Author:  [@Freek](https://forums.speedlife.net/u/Freek)
#### Post date: [October 7, 2009, 6:29pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/6 "2009-10-07T18:29:05Z")
Very nice! Any under hood shots?
---
### Author:  [@Tim](https://forums.speedlife.net/u/Tim)
#### Post date: [October 7, 2009, 6:34pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/7 "2009-10-07T18:34:59Z")
That wheelie was siqq :tup:
---
### Author:  [@2stangs8689](https://forums.speedlife.net/u/2stangs8689)
#### Post date: [October 7, 2009, 6:35pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/8 "2009-10-07T18:35:15Z")
Here’s a few from the build.
---
### Author:  [@2stangs8689](https://forums.speedlife.net/u/2stangs8689)
#### Post date: [October 7, 2009, 6:38pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/9 "2009-10-07T18:38:00Z")
Here’s a vid from the day we got it fired up.
---
### Author:  [@KuntryQuestTSi](https://forums.speedlife.net/u/KuntryQuestTSi)
#### Post date: [October 7, 2009, 6:52pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/10 "2009-10-07T18:52:49Z")
Amazing! nice wheelie
:tup:
---
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [October 7, 2009, 6:54pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/11 "2009-10-07T18:54:48Z")
Does it do wheelies because of where the exhaust pushes on the ground?
:tup:
Don is a cool guy, and a good tuner to boot. His motor is so ugly though.
---
### Author:  [@MrSmith](https://forums.speedlife.net/u/MrSmith)
#### Post date: [October 7, 2009, 7:04pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/12 "2009-10-07T19:04:27Z")
:eek:
If I ever buy a V8 I am paying you uglyfox guys to work on it. Fab work looks top notch I am loving your air to water and IC pipe setup. Lots of time and money in all the right places.
---
### Author:  [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)
#### Post date: [October 7, 2009, 7:05pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/13 "2009-10-07T19:05:03Z")
weak.
j/k whats with the holey engine bay dude? I’m mildly disappointed.
otherwise :tup:
---
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [October 7, 2009, 7:11pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/14 "2009-10-07T19:11:48Z")
nice! i wish i took a look at the car the other day.
btw, Lingenfelter, who makes my 2-step now offers the same module in a 3 step fashion. i might take your advice and see if they’ll swap with me over winter :tup:
car runs great, congrats 🙂
---
### Author:  [@2stangs8689](https://forums.speedlife.net/u/2stangs8689)
#### Post date: [October 7, 2009, 7:13pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/15 "2009-10-07T19:13:36Z")
> [@MrSmith](#):
>
> :eek:
>
> If I ever buy a V8 I am paying you uglyfox guys to work on it. Fab work looks top notch I am loving your air to water and IC pipe setup. Lots of time and money in all the right places.
Just leave a BLANK check…lol. Thanks. Had alot of help.
As far as the engine bay goes, you’re right, I wanted to do it, but we built this car in 6 months, so shaving ANOTHER engine bay was not in the cards this year. We’ve shaved 4 already over the last 3 winter’s, wasn’t looking forward to another one, but it’s on the list though.
Actually getting ready to do a friends engine bay, just pulled everything out this weekend.
---
### Author:  [@2stangs8689](https://forums.speedlife.net/u/2stangs8689)
#### Post date: [October 7, 2009, 7:16pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/16 "2009-10-07T19:16:48Z")
> [@turbo ls1 ss](#):
>
> nice! i wish i took a look at the car the other day.
>
> 🙂
Actually, it wasn’t there, but thanks. It’s parked for the year.
Get the 3 step, and set it up like we discussed, will help alot.
---
### Author:  [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [October 7, 2009, 7:20pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/17 "2009-10-07T19:20:03Z")
ahh…
cool :tup:
---
### Author:  [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)
#### Post date: [October 7, 2009, 7:20pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/18 "2009-10-07T19:20:43Z")
> [@2stangs8689](#):
>
> As far as the engine bay goes, you’re right, I wanted to do it, but we built this car in 6 months, so shaving ANOTHER engine bay was not in the cards this year.
:tantrum:
😃
---
### Author:  [@FourEyed](https://forums.speedlife.net/u/FourEyed)
#### Post date: [October 7, 2009, 7:28pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/19 "2009-10-07T19:28:46Z")
I like them much better shaved. :tup:
---
### Author:  [@Trkbossls](https://forums.speedlife.net/u/Trkbossls)
#### Post date: [October 7, 2009, 8:17pm UTC](https://forums.speedlife.net/t/my-88mm-turbo-car/74546/20 "2009-10-07T20:17:28Z")
I saw this car in person. Omg wish I had done something like this with mine. Awesome work
[Next page](https://forums.speedlife.net/t/my-88mm-turbo-car/74546.md?page=2)