# My Break Cable Snapped...

**URL:** <https://forums.speedlife.net/t/my-break-cable-snapped/192120>\
**Category:** PittSpeed Automotive\
**Created:** [August 30, 2007, 10:14am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120 "2007-08-30T10:14:16Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![imported\_renegade1](https://avatars.discourse-cdn.com/v4/letter/i/4bbf92/32.png) [@imported\_renegade1](https://forums.speedlife.net/u/imported_renegade1)\
**Post date:** [August 30, 2007, 10:14am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/1 "2007-08-30T10:14:16Z")

</div>

So my break cable snapped and punctured my break fluid hose. and now I have all this clear fluid puddle under my car. smells like gasoline but it’s thick like break fluid. I tried taking my honda to the toyota stealership assuming they could both work on each others cars, but they told me it was going to cost me $800. How do I fix this at home. my friend told me that duck tape would work but I don’t think it will hold for very long.

---

<div class="post-metadata">

**Author:** ![munster\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/munster_ek/32/5977_2.png) [@munster\_ek](https://forums.speedlife.net/u/munster_ek)\
**Post date:** [August 30, 2007, 10:22am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/2 "2007-08-30T10:22:08Z")

</div>

If it’s a brake line that snapped cut in front of the break and behind it. Get two couplers and put a patch section in. You’d need a pipe cutter and a 45 deg double flare tool.

Or you could take it to a brake/muffler shop and have them do it. Duct tape will not hold on a brake line.

---

<div class="post-metadata">

**Author:** ![imported\_renegade1](https://avatars.discourse-cdn.com/v4/letter/i/4bbf92/32.png) [@imported\_renegade1](https://forums.speedlife.net/u/imported_renegade1)\
**Post date:** [August 30, 2007, 10:30am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/3 "2007-08-30T10:30:00Z")

</div>

> [@Rate todays storms that you encounter!](https://forums.speedlife.net/t/rate-todays-storms-that-you-encounter/32207/13):
>
> If it’s a brake line that snapped cut in front of the break and behind it. Get two couplers and put a patch section in. You’d need a pipe cutter and a 45 deg double flare tool.
> 
> Or you could take it to a brake/muffler shop and have them do it. Duct tape will not hold on a brake line.

Toyota said it could be done at home with heat shrinking tubing and a butt connector for speaker wire as long as I krimp it right.

---

<div class="post-metadata">

**Author:** ![burnyd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/burnyd/32/6020_2.png) [@burnyd](https://forums.speedlife.net/u/burnyd)\
**Post date:** [August 30, 2007, 10:33am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/4 "2007-08-30T10:33:00Z")

</div>

toyota charges 120 dollars for a coolant flush on most cars.

---

<div class="post-metadata">

**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\
**Post date:** [August 30, 2007, 10:33am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/5 "2007-08-30T10:33:30Z")

</div>

Rear or front?

what wheel is it hard line or flex?

---

<div class="post-metadata">

**Author:** ![foz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/foz/32/6028_2.png) [@foz](https://forums.speedlife.net/u/foz)\
**Post date:** [August 30, 2007, 10:47am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/6 "2007-08-30T10:47:57Z")

</div>

are telling me they told you to “crimp connect” the ermegency brake cable, and use heat shrink tubing on the brake hose?

That a serious liability for them to suggest … when it fails, they told you it would work!

---

<div class="post-metadata">

**Author:** ![munster\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/munster_ek/32/5977_2.png) [@munster\_ek](https://forums.speedlife.net/u/munster_ek)\
**Post date:** [August 30, 2007, 10:56am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/7 "2007-08-30T10:56:09Z")

</div>

> [@Rate todays storms that you encounter!](https://forums.speedlife.net/t/rate-todays-storms-that-you-encounter/32207/14):
>
> Rear or front?
> 
> what wheel is it hard line or flex?

Yeah. I’m confused as to what broke now…

If you have fluid leaking it’s either rubber or hardline, but you’re not going to fix either of them with duct tape or heat shrink.

Can you take a picture of what broke?

---

<div class="post-metadata">

**Author:** ![Cheeks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cheeks/32/5930_2.png) [@Cheeks](https://forums.speedlife.net/u/Cheeks)\
**Post date:** [August 30, 2007, 11:35am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/8 "2007-08-30T11:35:32Z")

</div>

are you on fucking crack?

---

<div class="post-metadata">

**Author:** ![green](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/green/32/5996_2.png) [@green](https://forums.speedlife.net/u/green)\
**Post date:** [August 30, 2007, 11:42am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/9 "2007-08-30T11:42:06Z")

</div>

> [@Ebay of the day !](https://forums.speedlife.net/t/ebay-of-the-day/32204/5):
>
> are you on fucking crack?

duct tape, crimp connectors, heat shrink tube?  
keep in mind this STOPS THE FUCKING CAR!!! spend the money quit being a cheap ass before you kill someone else.

---

<div class="post-metadata">

**Author:** ![77rednecktruck](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/77rednecktruck/32/5966_2.png) [@77rednecktruck](https://forums.speedlife.net/u/77rednecktruck)\
**Post date:** [August 30, 2007, 11:43am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/10 "2007-08-30T11:43:05Z")

</div>

just use hockey tape, it’s better than duct tape.

brakes are not that important, I would recommend the cheapest and easiest repair possible. /sarcasm

find out where the leak is and replace that whole line, whether it’s the rubber line or the hardline.

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [August 30, 2007, 2:22pm UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/11 "2007-08-30T14:22:19Z")

</div>

brake

---

<div class="post-metadata">

**Author:** ![F-B-A](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/f-b-a/32/6022_2.png) [@F-B-A](https://forums.speedlife.net/u/F-B-A)\
**Post date:** [August 30, 2007, 2:50pm UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/12 "2007-08-30T14:50:57Z")

</div>

this has got to be a joke.

at least it better be,

Have you driven the vehicle since the breakage? if so is it hard to stop? or does the peddle go to the floor?

brake fluid doesnt smell like gas…

---

<div class="post-metadata">

**Author:** ![munster\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/munster_ek/32/5977_2.png) [@munster\_ek](https://forums.speedlife.net/u/munster_ek)\
**Post date:** [August 30, 2007, 7:26pm UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/13 "2007-08-30T19:26:09Z")

</div>

> [@Jaguar hood ornament worth $2000](https://forums.speedlife.net/t/jaguar-hood-ornament-worth-2000/32191/17):
>
> this has got to be a joke.

I’m hoping it is. The duct tape/heat shrink comment kinda :eek:

---

<div class="post-metadata">

**Author:** ![imported\_renegade1](https://avatars.discourse-cdn.com/v4/letter/i/4bbf92/32.png) [@imported\_renegade1](https://forums.speedlife.net/u/imported_renegade1)\
**Post date:** [August 31, 2007, 5:02am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/14 "2007-08-31T05:02:24Z")

</div>

> [@\*\*\*\*Official: Southgate Meet Thread\*\*\*\*](https://forums.speedlife.net/t/official-southgate-meet-thread/29171/979):
>
> brake

yeah I used the wrong word on purpose. yes it was a joke and I know that if anything was wrong with my brakes I would spend the money for a garage to fix it properly. I’m not a total n00b when it comes to cars. maybe I should check my headlight fluid next to make sure that’s not leaking either :hsugh:

---

<div class="post-metadata">

**Author:** ![Quik83Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik83z/32/6042_2.png) [@Quik83Z](https://forums.speedlife.net/u/Quik83Z)\
**Post date:** [August 31, 2007, 5:26am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/15 "2007-08-31T05:26:20Z")

</div>

:1320:

---

<div class="post-metadata">

**Author:** ![Habib88](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/habib88/32/3341_2.png) [@Habib88](https://forums.speedlife.net/u/Habib88)\
**Post date:** [August 31, 2007, 5:33am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/16 "2007-08-31T05:33:11Z")

</div>

> [@\*\*\*\*Official: Southgate Meet Thread\*\*\*\*](https://forums.speedlife.net/t/official-southgate-meet-thread/29171/984):
>
> I’m hoping it is. The duct tape/heat shrink comment kinda :eek:

Same here. :nuts: Your brake system is basically just a basic hydrolic system. And its under a shitload of pressure when you goto hit your brakes. I don’t think there is enough duct tape & shrink tubing in the world for what you need. Best option would be just to take it to a garage that has the proper tools to flare and replace the section of line thats broken.

---

<div class="post-metadata">

**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\
**Post date:** [August 31, 2007, 6:00am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/17 "2007-08-31T06:00:43Z")

</div>

🤣

---

<div class="post-metadata">

**Author:** ![jcxcr4000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jcxcr4000/32/5980_2.png) [@jcxcr4000](https://forums.speedlife.net/u/jcxcr4000)\
**Post date:** [August 31, 2007, 9:12am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/18 "2007-08-31T09:12:15Z")

</div>

i think if you throw a few zip ties into the mix it might actually work

---

<div class="post-metadata">

**Author:** ![munster\_ek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/munster_ek/32/5977_2.png) [@munster\_ek](https://forums.speedlife.net/u/munster_ek)\
**Post date:** [August 31, 2007, 9:15am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/19 "2007-08-31T09:15:22Z")

</div>

and bubble gum.

AND JB WELD.

---

<div class="post-metadata">

**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\
**Post date:** [August 31, 2007, 9:18am UTC](https://forums.speedlife.net/t/my-break-cable-snapped/192120/20 "2007-08-31T09:18:56Z")

</div>

Can;t be fixed unless Right Stuff is used

[Next page](https://forums.speedlife.net/t/my-break-cable-snapped/192120.md?page=2)
