# my clutch is still fu\*\*ed
**URL:** https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029
**Category:** Canada Nissan Automotive
**Created:** [March 2, 2007, 7:28pm UTC](https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029 "2007-03-02T19:28:50Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@amarsx](https://forums.speedlife.net/u/amarsx)
#### Post date: [March 2, 2007, 7:28pm UTC](https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029/1 "2007-03-02T19:28:50Z")
i had to to pump the clutch to shift gears
i was told to change master clutch cylender
and i did.
i bled the the lines and now my clutch does this.
i pump it. it gets hard. i let it go for a bit.
and it just goes down like nothing there is no pressure in the clutch.
what could be?
---
### Author:  [@RS13](https://forums.speedlife.net/u/RS13)
#### Post date: [March 2, 2007, 8:56pm UTC](https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029/2 "2007-03-02T20:56:58Z")
Is the slave leaking at all
You should always change both slave and master together as they fail because of water contamination. So if one goes the other will go soon
But i bet you just did not bleed it properly
---
### Author:  [@Nis240](https://forums.speedlife.net/u/Nis240)
#### Post date: [March 2, 2007, 10:09pm UTC](https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029/3 "2007-03-02T22:09:01Z")
> [@RS13](#):
>
> Is the slave leaking at all
>
> You should always change both slave and master together as they fail because of water contamination. So if one goes the other will go soon
>
> But i bet you just did not bleed it properly
Or the pedal broke.
---
### Author:  [@amarsx](https://forums.speedlife.net/u/amarsx)
#### Post date: [March 2, 2007, 11:08pm UTC](https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029/4 "2007-03-02T23:08:26Z")
i read JoshB’s excellent Clutch Bleeding guide
and did all .
but
it might be the slave
i will change that and see whats up.
and the pedal looks fine to me.
🙂
---
### Author:  [@amarsx](https://forums.speedlife.net/u/amarsx)
#### Post date: [March 2, 2007, 11:18pm UTC](https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029/5 "2007-03-02T23:18:24Z")
and should i try removing the damper?
---
### Author:  [@Invalid\_Zero](https://forums.speedlife.net/u/Invalid_Zero)
#### Post date: [March 3, 2007, 12:12am UTC](https://forums.speedlife.net/t/my-clutch-is-still-fu-ed/146029/6 "2007-03-03T00:12:32Z")
Even though the slave might look dry, pull the boot back and you may find it full of fluid.