# My New Computer

**URL:** https://forums.speedlife.net/t/my-new-computer/45304
**Category:** NYSpeed Off Topic
**Created:** [March 19, 2008, 7:31pm UTC](https://forums.speedlife.net/t/my-new-computer/45304 "2008-03-19T19:31:47Z")
**Posts on this page:** 1
**Showing post:** 26

<div class="post-metadata">

### Author: ![Dr.Stevil](https://avatars.discourse-cdn.com/v4/letter/d/da6949/32.png) [@Dr.Stevil](https://forums.speedlife.net/u/Dr.Stevil)
#### Post date: [March 20, 2008, 6:33am UTC](https://forums.speedlife.net/t/my-new-computer/45304/26 "2008-03-20T06:33:13Z")

</div>

Change the front side bus from the stock 266 to 333 and set the memory mode (assuming your using 800mhz ddr2) to 333/800 (5:6 asynchronous I believe).

as for voltage, is there an auto setting? I’d leave it at that (or adjust it to a TOTAL of around 1.33v… stock is like 1.25 or close to it).

Only if you feel comfortable doing so, I should say. You’ll see a noticeable difference from 2.4ghz to 3.0ghz on the quads. This is pretty mild though and shouldn’t have any problems, even with the stock cooler

edit: just make sure you know how to reset the bios (jumper on the pcb probably) in case it doesn’t POST

---

_[View the full topic](https://forums.speedlife.net/t/my-new-computer/45304)._