# My sponsored 78 shovelhead build thread

**URL:** <https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907>\
**Category:** Builds\
**Created:** [December 28, 2012, 5:52am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907 "2012-12-28T05:52:09Z")\
**Posts on this page:** 20\
**Page:** 30

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [August 6, 2013, 6:25pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/581 "2013-08-06T18:25:34Z")

</div>

Frame stripped down and ready for blast/powdercoat. All the ugly harley welds were ground smooth, holes filled, unneeded brackets removed, etc.

![https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/1001090_10151839545614365_842599630_n.jpg](https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/1001090_10151839545614365_842599630_n.jpg)

---

<div class="post-metadata">

**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\
**Post date:** [August 6, 2013, 6:56pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/582 "2013-08-06T18:56:06Z")

</div>

#porn

---

<div class="post-metadata">

**Author:** ![Minglor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/minglor/32/7373_2.png) [@Minglor](https://forums.speedlife.net/u/Minglor)\
**Post date:** [August 6, 2013, 7:02pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/583 "2013-08-06T19:02:11Z")

</div>

Damn dude.  
You really have some serious time invested in this.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [August 6, 2013, 7:17pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/584 "2013-08-06T19:17:22Z")

</div>

> [@Minglor](#):
>
> Damn dude.  
> You really have some serious time invested in this.

About 500 hours give or take.

---

<div class="post-metadata">

**Author:** ![1sik\_bmw](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1sik_bmw/32/7341_2.png) [@1sik\_bmw](https://forums.speedlife.net/u/1sik_bmw)\
**Post date:** [August 8, 2013, 9:08am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/585 "2013-08-08T09:08:44Z")

</div>

> [@newman](#):
>
> About 500 hours give or take.

HOLY SHIT! 500 hours x $95 an hour shop rate=$47,500+parts cost= over $55k

---

<div class="post-metadata">

**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\
**Post date:** [August 8, 2013, 9:16am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/586 "2013-08-08T09:16:58Z")

</div>

> [@1sik bmw](#):
>
> HOLY SHIT! 500 hours x $95 an hour shop rate=$47,500+parts cost= over $55k

i can assure you there is more than $7500 in parts

---

<div class="post-metadata">

**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\
**Post date:** [August 8, 2013, 9:31am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/587 "2013-08-08T09:31:15Z")

</div>

> [@XwalkerX](#):
>
> i can assure you there is more than $7500 in parts

Ha last I knew was over $20k a while back lol.

---

<div class="post-metadata">

**Author:** ![TradersBASE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tradersbase/32/5321_2.png) [@TradersBASE](https://forums.speedlife.net/u/TradersBASE)\
**Post date:** [August 8, 2013, 10:44am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/588 "2013-08-08T10:44:16Z")

</div>

> [@1sik bmw](#):
>
> HOLY SHIT! 500 hours x $95 an hour shop rate=$47,500+parts cost= over $55k

Builds like this are a labor of love though. I’m sure when it’s done it will be “priceless” to him.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [August 8, 2013, 11:20am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/589 "2013-08-08T11:20:16Z")

</div>

There is about 11,000 in the motor alone.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [August 9, 2013, 9:11am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/590 "2013-08-09T09:11:08Z")

</div>

Got another set of rockerboxes to split. Usually when people split the rockers they run all sorts of crazy oil lines all over the place, but I’m not really a fan of that look:

![http://stblogs.streetchopperweb.com/files/2009/03/17924934-623x526.jpg](http://stblogs.streetchopperweb.com/files/2009/03/17924934-623x526.jpg)

So I wanted to minimize the obtrusiveness of the oil lines.

Started by cutting them in half:

 ![http://i17.photobucket.com/albums/b63/ctnewman3/null_zps0f0cc051.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/null_zps0f0cc051.jpg)

 ![http://i17.photobucket.com/albums/b63/ctnewman3/e787b8b7-64bc-4efc-ac67-577777e9ba3c_zpsfac3c10a.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/e787b8b7-64bc-4efc-ac67-577777e9ba3c_zpsfac3c10a.jpg)

Then I rounded them a bit on a belt sander and welded closed the original oil passages, which are drilled on an angle.

 ![http://i17.photobucket.com/albums/b63/ctnewman3/null_zpsa76bb971.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/null_zpsa76bb971.jpg)

Ground the (crappy) welds down:

 ![http://i17.photobucket.com/albums/b63/ctnewman3/null_zps52dcbdfb.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/null_zps52dcbdfb.jpg)

Then I went about making some oil tubes. I put one oring groove on the tube, then used another on the face of the tube so when the rocker boxes are reinstalled they will squeeze the tube.

Since I didn’t have any lathe access I had to make do with the bridgeport.

 ![http://i17.photobucket.com/albums/b63/ctnewman3/null_zps19a14c53.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/null_zps19a14c53.jpg)

Here are the completed tubes.

 ![http://i17.photobucket.com/albums/b63/ctnewman3/null_zps4aa13387.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/null_zps4aa13387.jpg)

Then I made a fixture to hold the two roxerboxes merfectly parallel to one another, which allowed me to ensure the tube hole would be straight across from one another. I made one drill hole to connect to the oil galley, and then a pocket to accept the oring and tube. Unfortunately I don’t have a picture of this. What I do have a picture of is a totally ghetto maneuver that I had to pull because I needed long bolts at 11pm…

 ![http://i17.photobucket.com/albums/b63/ctnewman3/null_zps87d94e0f.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/null_zps87d94e0f.jpg)

And then the (semi) complete rocker boxes. I still need to finish and smooth the metal. Going for a brushed look. Polished can go get fucked.

 ![http://i17.photobucket.com/albums/b63/ctnewman3/null_zps0c75fcfe.jpg](http://i17.photobucket.com/albums/b63/ctnewman3/null_zps0c75fcfe.jpg)

OH YEAH… Also, I had to buy some bolts for my oil pump. 1/4- **24** … not UNC, not UNF. Had to get them from Gardener-Wescott. I think it was something like 70 bucks for the handful of bolts I needed!

Also decided to replace my OEM rockers with Jim’s roller rockers, those should be here early next week.

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [August 9, 2013, 9:15am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/591 "2013-08-09T09:15:29Z")

</div>

“polished can go get fucked” LOL  
siq shit man.

---

<div class="post-metadata">

**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\
**Post date:** [August 9, 2013, 9:25am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/592 "2013-08-09T09:25:03Z")

</div>

such AN good look

---

<div class="post-metadata">

**Author:** ![Minglor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/minglor/32/7373_2.png) [@Minglor](https://forums.speedlife.net/u/Minglor)\
**Post date:** [August 9, 2013, 11:08am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/593 "2013-08-09T11:08:48Z")

</div>

> [@XwalkerX](#):
>
> such AN good look

…

---

<div class="post-metadata">

**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\
**Post date:** [August 9, 2013, 11:36am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/594 "2013-08-09T11:36:42Z")

</div>

cue up the slow clap .gif, that looks fantastic.

---

<div class="post-metadata">

**Author:** ![Paulo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/paulo/32/7328_2.png) [@Paulo](https://forums.speedlife.net/u/Paulo)\
**Post date:** [August 9, 2013, 11:51am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/595 "2013-08-09T11:51:29Z")

</div>

Do you have an o-ring/seal sourced for that transfer tube or do you plan to weld it together? That looks like a really deep seal groove but it may be just the perspective if the part is actually really small.

I like this approach a lot. The lines in the first pic you posted look wacky as fuck.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [August 9, 2013, 1:02pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/596 "2013-08-09T13:02:23Z")

</div>

> [@Paulo](#):
>
> Do you have an o-ring/seal sourced for that transfer tube or do you plan to weld it together? That looks like a really deep seal groove but it may be just the perspective if the part is actually really small.
> 
> I like this approach a lot. The lines in the first pic you posted look wacky as fuck.

Yeah. The tube OD is only .34. the groove dimensions are set up for 19% squish which is actually a little on the tight side for a viton oring.

---

<div class="post-metadata">

**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\
**Post date:** [August 9, 2013, 6:26pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/597 "2013-08-09T18:26:22Z")

</div>

Looks way better than that other shit :tup:

---

<div class="post-metadata">

**Author:** ![LUKE\_L](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luke_l/32/7462_2.png) [@LUKE\_L](https://forums.speedlife.net/u/LUKE_L)\
**Post date:** [August 10, 2013, 8:39am UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/598 "2013-08-10T08:39:00Z")

</div>

Looks WAYYYY better. :tup:

---

<div class="post-metadata">

**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\
**Post date:** [August 10, 2013, 5:55pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/599 "2013-08-10T17:55:36Z")

</div>

Stopped by today for a bit and pictures really don’t do this thing justice. Great work :tup:

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [August 10, 2013, 9:08pm UTC](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907/600 "2013-08-10T21:08:54Z")

</div>

Put in another 14 hour day. prepped the tank for paint, which was a huge pain, then welded and drilled/tapped a new set of oil passages in the rocker boxes to join the heads together. Then, since the rocker boxes were all ready to go, I started to work on the finish. Here’s a pic:

![https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/1150788_10151848119709365_1587281332_n.jpg](https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/1150788_10151848119709365_1587281332_n.jpg)

Also got the frame all spiffed up…

![https://sphotos-a-atl.xx.fbcdn.net/hphotos-ash4/999583_10151846981819365_1611700871_n.jpg](https://sphotos-a-atl.xx.fbcdn.net/hphotos-ash4/999583_10151846981819365_1611700871_n.jpg)

[Previous page](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907.md?page=29)

[Next page](https://forums.speedlife.net/t/my-sponsored-78-shovelhead-build-thread/227907.md?page=31)
