# My turbo options.

**URL:** <https://forums.speedlife.net/t/my-turbo-options/147496>\
**Category:** Canada Nissan Automotive\
**Created:** [July 29, 2007, 10:45am UTC](https://forums.speedlife.net/t/my-turbo-options/147496 "2007-07-29T10:45:35Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![Silverboost](https://avatars.discourse-cdn.com/v4/letter/s/b5e925/32.png) [@Silverboost](https://forums.speedlife.net/u/Silverboost)\
**Post date:** [July 30, 2007, 11:45pm UTC](https://forums.speedlife.net/t/my-turbo-options/147496/21 "2007-07-30T23:45:54Z")

</div>

> [@Bmason](#):
>
> I understand that there are going to be issues… But why not minimize the setbacks if there are issues in a daily driver. I drive my car all year round so for me the benefits of the journal bearing (cheaper, easier to rebuild if shit hits the fan) outweighed the performance gains of the GT turbo. I go to the track once every couple weeks. I drive my car to and from work every single day.
> 
> I’m not afraid to do stuff on my car man. The only things I’ve paid people to do is swap my tires, install my clutch (woulda done myself if I had the time), rebuild my head, and minor exhaust work since I can’t weld. Everything else I have done in my own garage.

hey man, you can do what you want and I wasn’t saying you weren’t capable, but it sounded like you might be questioning your own level of knowhow to move ahead. That’s cool if I misinterpreted that, didn’t mean to. I was just responding with my own experience to a question that you were apparently looking for the answer to, and telling you that after 3 years and over 50,000 boosted miles with the exact turbo you were talking about, in rain, shine, snow, sub zero temps to racing at the track in 30+ degree weather at 11psi last friday night… I’m saying my turbo is running fine, so if reliability is what you’re using to make your decision it’s not like BB turbos are LESS reliable. Sure they might cost a little more to rebuild, but I try not to make decision based on “what if it all goes to hell”… I make it based on what’s the best turbo for what I’m looking for performance wise, reliability wise and so on. So just do your research on exactly what it is you want your turbo to do while it’s alive, not dead. Remember you’re boosting a QR, so let’s not even get started on what you might have to rebuild first.

best of luck though with your decision either way.

---

<div class="post-metadata">

**Author:** ![Silverboost](https://avatars.discourse-cdn.com/v4/letter/s/b5e925/32.png) [@Silverboost](https://forums.speedlife.net/u/Silverboost)\
**Post date:** [July 30, 2007, 11:50pm UTC](https://forums.speedlife.net/t/my-turbo-options/147496/22 "2007-07-30T23:50:58Z")

</div>

[quote=“350GT”]

> [@Silverboost](#):
>
> Why do you do it? Because it’s like an adrenaline boost every time that bitch spools up and surprises the fuck out of some knuckle head who thought they had something.

I love this guy couldnt have said it better myself. If your not on a shoe string budget get the BB power delivery is so quick and smooth its 1940s technology compared to 1990s technology that has fianally become affordable for the average guy.[/quote]

yeah I gotta admit, I’ve thought about getting rid of it and going with a new project, but I still love driving it every day. It’s loud and obnoxious and it rattles and people who don’t drive it hate it I’m sure when I drive by them… but this thing just comes to life when you step on it and that’s why I keep it. And it doesn’t sound like a 4-banger that’s for sure.

Might be looking at a used 350Z though to put a snail on in the next year or so. G35 hey? Amazing car man. Nothing about that car I don’t like. And with the boost, well I might have to have a look at that one one day. Bet it’s sweet.

---

<div class="post-metadata">

**Author:** ![mikesim](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mikesim/32/5561_2.png) [@mikesim](https://forums.speedlife.net/u/mikesim)\
**Post date:** [July 31, 2007, 9:58pm UTC](https://forums.speedlife.net/t/my-turbo-options/147496/23 "2007-07-31T21:58:40Z")

</div>

> [@GRIPPY](#):
>
> **Then it sounds like journal bearing is for you. And to mikesil, the comment about comparing BB to journal bearing, saying you’re talking 77% to 76% comparison is absolutely incorrect.** The gains are much more than that, and certainly more than a 150 rpm increase in spool, so please stop spreading incorrect information on this site.
> 
> a quote from AMZ tech
> 
> “Turbo Response – When driving a vehicle with the cartridge ball bearing turbocharger, you will find exceptionally crisp and strong throttle response. Garrett Ball Bearing turbochargers spool up 15% faster than traditional journal bearings. This produces an improved response that can be converted to quicker 0-60 mph speed. In fact, some professional drivers of Garrett ball-bearing turbocharged engines report that they feel like they are driving a big, normally aspirated engine.”
> 
> So it is a 15% difference, not 1% as you mentioned.

actually i was comparing the compressor efficiency maps of the two turbos right off the website he showed, not the so called “15% faster spool”.

that’s all marketing BS. no one uses “traditional journal bearing” turbos anymore, they’re comparing 270 degree journal bearing to a “newer GT cartridge”. turbo lag is more of a tuning issue than anything else as well. if you’re overstepping the pedal, it’ll bog and seem to accelerate slowly, until it almost explodes with power. or similarly, nissan programs their ECUs to pull a ton of timing when you’re going into boost. if you’ve selected a turbo that will be out of it’s efficiency range when you want to have full boost, you won’t have the timing to accelerate your car properly.

for those who really want to know more about their turbos, and “why is my car so laggy” they should read this site first (before selecting any turbo): [http://www.turbomustangs.com/turbotech/main.htm](http://www.turbomustangs.com/turbotech/main.htm)

secondly, i’d suggest at least taking the car to be tuned by a professional who can adjust your timing and fuel for your new compressor map.

i can’t stress enough that TUNING includes proper selection of parts to go with your setup, and the ECU part of it plays a major role. if someone complains that their GT2871 isn’t hitting full boost till 4500 rpm, they’re doing something WRONG. my friends 1.8L hits 10psi at 2500rpm and pulls solid till redline. it’s a T3/T4 turbo which is much larger than any T28 out there.

---

<div class="post-metadata">

**Author:** ![240sx2nr](https://avatars.discourse-cdn.com/v4/letter/2/97f17d/32.png) [@240sx2nr](https://forums.speedlife.net/u/240sx2nr)\
**Post date:** [August 1, 2007, 5:29pm UTC](https://forums.speedlife.net/t/my-turbo-options/147496/24 "2007-08-01T17:29:29Z")

</div>

> [@GRIPPY](#):
>
> It all comes down to getting what you pay for really. Here is my weak illustration. Sure a VHS does the trick if you wanna watch a movie, but they are outdated, and a DVD will look much better. You can pay 50 cents at a garage sale get a VHS player and get some pleasure out of it. Or you can go to walmart and get a DVD player for $40 and watch the same movie on DVD and get some more pleasure out of it. Was it really worth the extra $39.50 to watch the same movie but just with better quality? Well that answer is up to you. I choose to spend the extra money on the BB turbo because i feel it is worth it, but i know people who dont. Nobody cant prove to you that it is worth it, it comes down to you deciding if the amount you gain is worth the money.

Grippy FTW! :partyman:  
I’m going to suggest that to the book of 100 best analogy’s ever.

[Previous page](https://forums.speedlife.net/t/my-turbo-options/147496.md?page=1)
