# need 1 rollcage tube bent

**URL:** <https://forums.speedlife.net/t/need-1-rollcage-tube-bent/227435>\
**Category:** Classifieds\
**Created:** [November 26, 2012, 7:38am UTC](https://forums.speedlife.net/t/need-1-rollcage-tube-bent/227435 "2012-11-26T07:38:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![95dime](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95dime/32/7514_2.png) [@95dime](https://forums.speedlife.net/u/95dime)\
**Post date:** [November 26, 2012, 7:38am UTC](https://forums.speedlife.net/t/need-1-rollcage-tube-bent/227435/1 "2012-11-26T07:38:58Z")

</div>

i need to have tube bent. it is 1-5/8" O.D. just need a bend put in to clear my master cylinders for firewall. i have the tube and the amount of bend needed.

the guy i normally go to has not called back and i need this done asap. preferably by tomorrow night. just checking to see if anyone on here has the tools to do it, otherwise i will just call around to local shops. thanks.

---

<div class="post-metadata">

**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\
**Post date:** [November 26, 2012, 9:41am UTC](https://forums.speedlife.net/t/need-1-rollcage-tube-bent/227435/2 "2012-11-26T09:41:36Z")

</div>

Txt me. 957 0377

---

<div class="post-metadata">

**Author:** ![95dime](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95dime/32/7514_2.png) [@95dime](https://forums.speedlife.net/u/95dime)\
**Post date:** [November 27, 2012, 9:19am UTC](https://forums.speedlife.net/t/need-1-rollcage-tube-bent/227435/3 "2012-11-27T09:19:05Z")

</div>

chodas buddy didnt have right die for 1-5/8"…seeing if anyone else has this otherwise ill be calling a few shops this afternoon…

---

<div class="post-metadata">

**Author:** ![95dime](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95dime/32/7514_2.png) [@95dime](https://forums.speedlife.net/u/95dime)\
**Post date:** [November 28, 2012, 3:17pm UTC](https://forums.speedlife.net/t/need-1-rollcage-tube-bent/227435/4 "2012-11-28T15:17:57Z")

</div>

Nevermind on this, took care of it on a tubing bender at zeons automotive :tup: