# need a chevy v8 and K5 rear for street rod build **URL:** \ **Category:** Classifieds\ **Created:** [August 26, 2013, 4:16pm UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625 "2013-08-26T16:16:22Z")\ **Posts on this page:** 9\ **Page:** 2
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [August 27, 2013, 10:32am UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/21 "2013-08-27T10:32:53Z")
I have a 28 spline ranger axle 8.8 with drums. I will measure it hub to hub for you. Also have some bigger axle D60 or something like that back there too. Ill figure out what it is and measure it h-h for you also. ---
**Author:** ![vcforlife15](https://avatars.discourse-cdn.com/v4/letter/v/e480ec/32.png) [@vcforlife15](https://forums.speedlife.net/u/vcforlife15)\ **Post date:** [August 27, 2013, 2:23pm UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/22 "2013-08-27T14:23:47Z")
200 bucks? Think I paid 4 or 5 for it. ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [August 27, 2013, 4:44pm UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/23 "2013-08-27T16:44:32Z")
> [@securing a network?](https://forums.speedlife.net/t/securing-a-network/53380/10): > > 2 peice rear/center bolts? 2 piece rms and it currently has perimeter bolt covers. The heads might be drilled for both. I never pulled a cover. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 28, 2013, 6:36am UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/24 "2013-08-28T06:36:22Z")
> [@WTB: 5x114.3 Wheels](https://forums.speedlife.net/t/wtb-5x114-3-wheels/53120/7): > > I have a 28 spline ranger axle 8.8 with drums. I will measure it hub to hub for you. > > Also have some bigger axle D60 or something like that back there too. Ill figure out what it is and measure it h-h for you also. dude thanks but honestly i aint dealin with ya, any time i tried gettin ahold of ya, you never got back to me, wicked flakey bro. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [August 28, 2013, 11:34am UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/25 "2013-08-28T11:34:10Z")
> [@How often do you....](https://forums.speedlife.net/t/how-often-do-you/53391/19): > > dude thanks but honestly i aint dealin with ya, any time i tried gettin ahold of ya, you never got back to me, wicked flakey bro. Um ok. :dunno I went back through 6 months of PM’s and not a single one from you. (but I deleted a ton so maybe it was older) By all means post when you asked me for a refresher, because I don’t have any evidence. This isn’t a hard transaction either, I tell you what axles I have, if you want them you come to my place of business and get them. Its not like I would make a paper mache rear end and try to sell it to you on the spot as a ford 9". lol Put it this way… Ask my “arch enemy” D.Gage how our meetup went at my shop, and how his wheels came out when he picks them up tonight. The internet is a bitch, I am not a flake. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 29, 2013, 11:52am UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/26 "2013-08-29T11:52:05Z")
> [@toomanycamaros"](#): > > I have a low miles goodwrench 305 i would be willing to sell. It has a small cam and a gear drive, but no intake or carb. I would like to get 300 for it. so no mech fuel pump provision? if u tryin to free up space , how you feel about 200? ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [August 29, 2013, 12:00pm UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/27 "2013-08-29T12:00:00Z")
> [@\*\*\*Official Nyspeed Photo Hunt\*\*\* v.3rd times a charm](https://forums.speedlife.net/t/official-nyspeed-photo-hunt-v-3rd-times-a-charm/53281/193): > > so no mech fuel pump provision? if u tryin to free up space , how you feel about 200? It should have a block off plate but no push rod. It’s on a stand in the garage of my rental house. I haven’t looked at it i. A while so i would have to check to be sure. I would really like to get 250 out of it. Can you pm a phone number and we could discuss it further? ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [September 6, 2013, 7:25pm UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/28 "2013-09-06T19:25:04Z")
bump , bought a 69 camaro rear and t5 trans still need a motor… 2many… ever find out if it will run a mech pump?? ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [September 8, 2013, 5:25pm UTC](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625/29 "2013-09-08T17:25:08Z")
> [@Waddup](https://forums.speedlife.net/t/waddup/1164/27): > > bump , bought a 69 camaro rear and t5 trans still need a motor… > > 2many… ever find out if it will run a mech pump?? It has a block off plate installed so you would need a pump and pushrod. [Previous page](https://forums.speedlife.net/t/need-a-chevy-v8-and-k5-rear-for-street-rod-build/267625.md?page=1)