# Need Allison A1000, **URL:** \ **Category:** Shift518 Automotive\ **Created:** [July 15, 2011, 4:19pm UTC](https://forums.speedlife.net/t/need-allison-a1000/259431 "2011-07-15T16:19:03Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![mrbuff754](https://avatars.discourse-cdn.com/v4/letter/m/9f8e36/32.png) [@mrbuff754](https://forums.speedlife.net/u/mrbuff754)\ **Post date:** [July 15, 2011, 4:19pm UTC](https://forums.speedlife.net/t/need-allison-a1000/259431/1 "2011-07-15T16:19:03Z")
looking for a place local to rebuild or upgrade. tranny down shifted in to 3ed gear at 60 today on the way hone and is now stuck in 3ed gear. FML ---
**Author:** ![freakLS7](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freakls7/32/6298_2.png) [@freakLS7](https://forums.speedlife.net/u/freakLS7)\ **Post date:** [July 15, 2011, 7:49pm UTC](https://forums.speedlife.net/t/need-allison-a1000/259431/2 "2011-07-15T19:49:13Z")
> [@Restaurant with good wine selections?](https://forums.speedlife.net/t/restaurant-with-good-wine-selections/43778/18): > > looking for a place local to rebuild or upgrade. tranny down shifted in to 3ed gear at 60 today on the way hone and is now stuck in 3ed gear. FML clear the code with the tuner and be easy on it it will last for a while still… dont need a trans yet! ---
**Author:** ![underboosted](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/underboosted/32/6424_2.png) [@underboosted](https://forums.speedlife.net/u/underboosted)\ **Post date:** [July 16, 2011, 6:19am UTC](https://forums.speedlife.net/t/need-allison-a1000/259431/3 "2011-07-16T06:19:31Z")
What he said. Also make sure the tire size is right in the tuner. Mine did that when the tire size was off in the tuner. ---
**Author:** ![JVG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jvg/32/6348_2.png) [@JVG](https://forums.speedlife.net/u/JVG)\ **Post date:** [July 16, 2011, 11:52am UTC](https://forums.speedlife.net/t/need-allison-a1000/259431/4 "2011-07-16T11:52:55Z")
I’ll triple that. three HD drivers in here now. -Adam ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [July 16, 2011, 12:28pm UTC](https://forums.speedlife.net/t/need-allison-a1000/259431/5 "2011-07-16T12:28:07Z")
check the connector on the transmission. It’s a large one about 2 inch around and it goes into the top of the pan, can’t remember which side. I see issues like this all the time and work from water and crap getting in there, just don’t push the male plug into the valvebody when you reinstall it and get some dielectric grease. ---
**Author:** ![mrbuff754](https://avatars.discourse-cdn.com/v4/letter/m/9f8e36/32.png) [@mrbuff754](https://forums.speedlife.net/u/mrbuff754)\ **Post date:** [July 16, 2011, 12:35pm UTC](https://forums.speedlife.net/t/need-allison-a1000/259431/6 "2011-07-16T12:35:23Z")
i will take a look and clean it, the truck had deffently been sunk in the mud times. i will recheck the tire size on my buly dog. seems to shift ok today. yesterday the code would not clear when it was stuck in 3ed. thanks for the help ---
**Author:** ![freakLS7](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freakls7/32/6298_2.png) [@freakLS7](https://forums.speedlife.net/u/freakLS7)\ **Post date:** [July 16, 2011, 8:53pm UTC](https://forums.speedlife.net/t/need-allison-a1000/259431/7 "2011-07-16T20:53:48Z")
you gotta watch the 4-5 shift on the 5spd ally and the 5-6 shift on the 6spds they are tend to slip and once the tcm senses a slip it goes into “limp mode” (stuck in 3rd) trans should be fine once cleared but will limp easier next time dont get on it in the high gears!