# need ecu soldered

**URL:** <https://forums.speedlife.net/t/need-ecu-soldered/67719>\
**Category:** NYSpeed Automotive\
**Created:** [May 13, 2009, 9:00am UTC](https://forums.speedlife.net/t/need-ecu-soldered/67719 "2009-05-13T09:00:47Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![zmainiac](https://avatars.discourse-cdn.com/v4/letter/z/d78d45/32.png) [@zmainiac](https://forums.speedlife.net/u/zmainiac)\
**Post date:** [May 13, 2009, 9:00am UTC](https://forums.speedlife.net/t/need-ecu-soldered/67719/1 "2009-05-13T09:00:47Z")

</div>

A member of my z club needs to get a resistor soldered into his ecu. He is located in buffalo. He is running a 12v cobra maf and the stock maf is a 0 to 5v sensor. There are very detailed instructions on what to do to the stock board but you need good soldering equipment to do it. He is running a nistune setup but they didn’t set it up for the cobra maf and they are located in Australia. Is there any place that he can take it to in buffalo?

---

<div class="post-metadata">

**Author:** ![justa4door](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justa4door/32/7259_2.png) [@justa4door](https://forums.speedlife.net/u/justa4door)\
**Post date:** [May 13, 2009, 9:06am UTC](https://forums.speedlife.net/t/need-ecu-soldered/67719/2 "2009-05-13T09:06:34Z")

</div>

call swerve

---

<div class="post-metadata">

**Author:** ![Birdman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/birdman/32/5186_2.png) [@Birdman](https://forums.speedlife.net/u/Birdman)\
**Post date:** [May 13, 2009, 9:25am UTC](https://forums.speedlife.net/t/need-ecu-soldered/67719/3 "2009-05-13T09:25:01Z")

</div>

Paging Andy

---

<div class="post-metadata">

**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\
**Post date:** [May 13, 2009, 10:40am UTC](https://forums.speedlife.net/t/need-ecu-soldered/67719/4 "2009-05-13T10:40:30Z")

</div>

innovative tuning has a very competent guy that works on ecus

---

<div class="post-metadata">

**Author:** ![zmainiac](https://avatars.discourse-cdn.com/v4/letter/z/d78d45/32.png) [@zmainiac](https://forums.speedlife.net/u/zmainiac)\
**Post date:** [May 13, 2009, 11:55am UTC](https://forums.speedlife.net/t/need-ecu-soldered/67719/5 "2009-05-13T11:55:29Z")

</div>

that is what i was thinking and they are right around the corner. i am trying to get a hold of them.

---

<div class="post-metadata">

**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\
**Post date:** [May 13, 2009, 12:45pm UTC](https://forums.speedlife.net/t/need-ecu-soldered/67719/6 "2009-05-13T12:45:52Z")

</div>

Bring beer, it makes that guy really really happy.

Coors light