# Need Exhaust work ASAP

**URL:** <https://forums.speedlife.net/t/need-exhaust-work-asap/118619>\
**Category:** SON240sx Automotive\
**Created:** [September 19, 2008, 11:54pm UTC](https://forums.speedlife.net/t/need-exhaust-work-asap/118619 "2008-09-19T23:54:26Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![kingtut](https://avatars.discourse-cdn.com/v4/letter/k/c2a13f/32.png) [@kingtut](https://forums.speedlife.net/u/kingtut)\
**Post date:** [September 19, 2008, 11:54pm UTC](https://forums.speedlife.net/t/need-exhaust-work-asap/118619/1 "2008-09-19T23:54:26Z")

</div>

Hey guys, i need a shop that can bend 3’’ piping because every shop in my area could only bend 2.5’’…i live in markham/richmond hill area so if anyone knows some good exhaust people let me know…Thanks in advance

---

<div class="post-metadata">

**Author:** ![Happy240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/happy240sx/32/5515_2.png) [@Happy240sx](https://forums.speedlife.net/u/Happy240sx)\
**Post date:** [September 20, 2008, 4:42am UTC](https://forums.speedlife.net/t/need-exhaust-work-asap/118619/2 "2008-09-20T04:42:14Z")

</div>

Most shops can not actually afford a mandrel bender…so most shops buy pre-bend mandrels.

So if need an exhaust made with 3" mandrel bends it will likely need to be fabbed. Long story short…go to SG Motorsport.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [September 20, 2008, 4:57am UTC](https://forums.speedlife.net/t/need-exhaust-work-asap/118619/3 "2008-09-20T04:57:28Z")

</div>

^^^^^^^^^^second that motion

farmer

---

<div class="post-metadata">

**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\
**Post date:** [September 20, 2008, 5:41am UTC](https://forums.speedlife.net/t/need-exhaust-work-asap/118619/4 "2008-09-20T05:41:50Z")

</div>

we can bend 3" pipe. not mandrel though. and we’re in brampton.

just sayin.

besides the obvious custom exhaust places…i think we’re the only independent shop around with a pipe bender.

---

<div class="post-metadata">

**Author:** ![kingtut](https://avatars.discourse-cdn.com/v4/letter/k/c2a13f/32.png) [@kingtut](https://forums.speedlife.net/u/kingtut)\
**Post date:** [September 20, 2008, 11:27am UTC](https://forums.speedlife.net/t/need-exhaust-work-asap/118619/5 "2008-09-20T11:27:20Z")

</div>

i don’t need a full fabrication or anything…i already have one fabbed up and on my car but there was a mis calculation and now the pipe after the downpipe is literally 2 cm away from my frame rail and it bangs on it while im turning and if i go over 3000 rpm