# Need guage help!

**URL:** <https://forums.speedlife.net/t/need-guage-help/122317>\
**Category:** SON240sx Automotive\
**Created:** [March 5, 2009, 7:16am UTC](https://forums.speedlife.net/t/need-guage-help/122317 "2009-03-05T07:16:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jacktherabbit](https://avatars.discourse-cdn.com/v4/letter/j/22d042/32.png) [@jacktherabbit](https://forums.speedlife.net/u/jacktherabbit)\
**Post date:** [March 5, 2009, 7:16am UTC](https://forums.speedlife.net/t/need-guage-help/122317/1 "2009-03-05T07:16:44Z")

</div>

Hey;

I have recently bought a oil/ coolant temp gauge, volt gauge, and oil pressure gauge.The problem is that i dont know where one needs to mount the sensors units?

-oil/coolant temp gauge: has a probe with some fittings  
-oil pressure: has a small tubing with fittings on the end  
-Volt gauge: has 2 terminals(I know one is any + wire, and the other is any ground)

If someone can help me with the proper location on mounting the sensors, that would be great.

Thanks a lot.

---

<div class="post-metadata">

**Author:** ![Dj-Infinit](https://avatars.discourse-cdn.com/v4/letter/d/7cd45c/32.png) [@Dj-Infinit](https://forums.speedlife.net/u/Dj-Infinit)\
**Post date:** [March 7, 2009, 6:30pm UTC](https://forums.speedlife.net/t/need-guage-help/122317/2 "2009-03-07T18:30:29Z")

</div>

The oil pressure gauge sensor is mounted where the Ecu oil pressure sensor is. Which is right beside the oil filter. You need a “t” i think it is, so u can screw your gauge oil sensor onto and your ecu oil sensor, and then screw into the block.

Then run your oil lines to your gauge.

I also think that the coolant temp sensor, can go right where the ecu coolant temp sensor is, and its similar process like the oil pressure sensor install.