# Need help from someone with an E36 **URL:** \ **Category:** Shift518 Automotive\ **Created:** [December 1, 2011, 4:20pm UTC](https://forums.speedlife.net/t/need-help-from-someone-with-an-e36/261564 "2011-12-01T16:20:42Z")\ **Posts on this page:** 1\ **Showing post:** 68
**Author:** ![Mafdark](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mafdark/32/6322_2.png) [@Mafdark](https://forums.speedlife.net/u/Mafdark)\ **Post date:** [December 22, 2011, 9:52am UTC](https://forums.speedlife.net/t/need-help-from-someone-with-an-e36/261564/68 "2011-12-22T09:52:55Z")
> [@the new Vii](https://forums.speedlife.net/t/the-new-vii/47400/4): > > what about when the switch is ‘out’ though > > what I’m asking is, when the switch for the hazards is not on, is the light on the switch flashing, or no? When the switch it out it doesn’t flash. That seems to mesh with what i’m seeing on the diagram though. Basically the switch shouldn’t flash while it’s out or else it would flash when ever you turn on your left blinker It does flash while pressed. > [@Need Help with UHaul Assistance...](https://forums.speedlife.net/t/need-help-with-uhaul-assistance/47380/12): > > did you check that trunk harness? yep, looks fine other than an obvious previous repair attempt. I moved all the wires around and checked them out, they are all shielded fine. > [@ZR-1 official HP 638!!!!!Also 604 TQ](https://forums.speedlife.net/t/zr-1-official-hp-638-also-604-tq/47384/20): > > and you’re saying that when you reset the switch last night they went off and stayed off, but then turned back on again by themselves? I think the relay wasn’t seated completely and when I hopped in the car to hit the switch it came loose or something. When I came back from dinner it was flashing again. The switch definitely is not affecting anything right now when I turn it on and off. --- _[View the full topic](https://forums.speedlife.net/t/need-help-from-someone-with-an-e36/261564)._