# Need help in parking lot job! **URL:** https://forums.speedlife.net/t/need-help-in-parking-lot-job/19475 **Category:** NYSpeed Automotive **Created:** [October 30, 2006, 7:44pm UTC](https://forums.speedlife.net/t/need-help-in-parking-lot-job/19475 "2006-10-30T19:44:03Z") **Posts on this page:** 1 **Showing post:** 2
### Author: ![legend4life](https://avatars.discourse-cdn.com/v4/letter/l/e47c2d/32.png) [@legend4life](https://forums.speedlife.net/u/legend4life) #### Post date: [October 30, 2006, 8:24pm UTC](https://forums.speedlife.net/t/need-help-in-parking-lot-job/19475/2 "2006-10-30T20:24:19Z")
I found some random tools and a stock scissor jack and went out to check it out. Here is a pic, clicky for larger image: [![http://img214.imageshack.us/img214/1508/upperballjointbrokeammiop6.th.jpg](http://img214.imageshack.us/img214/1508/upperballjointbrokeammiop6.th.jpg)](http://img214.imageshack.us/my.php?image=upperballjointbrokeammiop6.jpg) Sorry for the muddy quality, it’s a cell phone pic, but I think it is showing that the upper ball joint is disconnected from the upper control arm. Here is a parts diagram of the upper arm: [http://www.acuraparts247.com/prddisplay.jsp?inputstate=5&catcgry1=LEGEND&catcgry2=1992&catcgry3=2DR+LS&catcgry5=KNUCKLE&ListAll=All&vinsrch=no](http://www.acuraparts247.com/prddisplay.jsp?inputstate=5&catcgry1=LEGEND&catcgry2=1992&catcgry3=2DR+LS&catcgry5=KNUCKLE&ListAll=All&vinsrch=no) It doesn’t look too bad per the diagram, so if I find the tools I need I’ll try it myself, but some help wouldn’t hurt at all. 🙂 --- _[View the full topic](https://forums.speedlife.net/t/need-help-in-parking-lot-job/19475)._