# Need help plz

**URL:** <https://forums.speedlife.net/t/need-help-plz/125711>\
**Category:** SON240sx Automotive\
**Created:** [June 25, 2009, 7:00pm UTC](https://forums.speedlife.net/t/need-help-plz/125711 "2009-06-25T19:00:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rob\_96](https://avatars.discourse-cdn.com/v4/letter/r/43a26b/32.png) [@rob\_96](https://forums.speedlife.net/u/rob_96)\
**Post date:** [June 25, 2009, 7:00pm UTC](https://forums.speedlife.net/t/need-help-plz/125711/1 "2009-06-25T19:00:01Z")

</div>

swapped a sr20ve head on a aviner block with T25, i pluged the oil return whole in the head and did the whole drilling and tapping to put a ve head on the det block. so i built the motor and installed it in the car, during start up it ides but my oil psi light is on and i installed a autometer oil psi gauge. I used a distribution block to allow to use my oil psi sensor (factory), my autometer psi sender, autormeter temp senser and oil return. My problem is that i am unsure if i have oil psi in the engine. The car ran for over 30min no knocking or strange noises. coolant temp gauge works.

how can i check if there is oil psi in engine. I plan to buy a new sender, i bought the gauges used so sender could be wrong, but also my factory one…?

i took the valve cover off and there is some oil pooling but when i had the car idling today i could not see oil beeing squirted on the cam lobs…?

- oil is the blood of the car i am worried… help plz

cheers

rob

* * *

---

<div class="post-metadata">

**Author:** ![DJPyro](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@DJPyro](https://forums.speedlife.net/u/DJPyro)\
**Post date:** [June 25, 2009, 7:03pm UTC](https://forums.speedlife.net/t/need-help-plz/125711/2 "2009-06-25T19:03:12Z")

</div>

Might be better off checking [sr20forum.com](http://sr20forum.com), they’ve got more than a few people over there who’ve done the swap.

---

<div class="post-metadata">

**Author:** ![rob\_96](https://avatars.discourse-cdn.com/v4/letter/r/43a26b/32.png) [@rob\_96](https://forums.speedlife.net/u/rob_96)\
**Post date:** [June 25, 2009, 7:12pm UTC](https://forums.speedlife.net/t/need-help-plz/125711/3 "2009-06-25T19:12:59Z")

</div>

thanks man i just tryin to post everywhere.