# NEED HELP! TIG WELD NEEDED **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [September 13, 2006, 10:35am UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236 "2006-09-13T10:35:15Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![InitialD](https://avatars.discourse-cdn.com/v4/letter/i/d07c76/32.png) [@InitialD](https://forums.speedlife.net/u/InitialD)\ **Post date:** [September 13, 2006, 10:35am UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/1 "2006-09-13T10:35:15Z")
anyone knows of tig weld in town, i need to weld a 2" strip on my exhaust. reward is a must. please let me know. :partyman: ---
**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\ **Post date:** [September 13, 2006, 7:18pm UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/2 "2006-09-13T19:18:31Z")
I can but I am way in Calgary. ---
**Author:** ![Evan\_Mcclleland](https://avatars.discourse-cdn.com/v4/letter/e/41988e/32.png) [@Evan\_Mcclleland](https://forums.speedlife.net/u/Evan_Mcclleland)\ **Post date:** [September 13, 2006, 8:03pm UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/3 "2006-09-13T20:03:08Z")
jason is worth the drive… i have had some of my stuff done, and its PERFECT… you should make the drive even if its for 2 minnutes worth of work ---
**Author:** ![InitialD](https://avatars.discourse-cdn.com/v4/letter/i/d07c76/32.png) [@InitialD](https://forums.speedlife.net/u/InitialD)\ **Post date:** [September 14, 2006, 9:33am UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/4 "2006-09-14T09:33:56Z")
ok, i was there just recently, ill see if anyone can bum me a ride to there… thanks for help anyone closer though? ---
**Author:** ![InitialD](https://avatars.discourse-cdn.com/v4/letter/i/d07c76/32.png) [@InitialD](https://forums.speedlife.net/u/InitialD)\ **Post date:** [September 14, 2006, 9:39am UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/5 "2006-09-14T09:39:51Z")
oh and that recent drive to calgary cost me 85 bucks, went 63 on the memorial dr in the 50 zone, i didnt know it was 50, i thought it was 60, damn photoradar! ---
**Author:** ![Variable](https://avatars.discourse-cdn.com/v4/letter/v/cab0a1/32.png) [@Variable](https://forums.speedlife.net/u/Variable)\ **Post date:** [September 14, 2006, 10:30am UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/6 "2006-09-14T10:30:51Z")
Why does it need to be tig welded… if its exhaust you can do it up with a mig and it will be fine. I work in a welding shop… but personally I would just tell you to go to alberta custom exhaust. ---
**Author:** ![InitialD](https://avatars.discourse-cdn.com/v4/letter/i/d07c76/32.png) [@InitialD](https://forums.speedlife.net/u/InitialD)\ **Post date:** [September 14, 2006, 1:12pm UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/7 "2006-09-14T13:12:19Z")
you can use mig on stainless steel? ---
**Author:** ![insaneskiier](https://avatars.discourse-cdn.com/v4/letter/i/b487fb/32.png) [@insaneskiier](https://forums.speedlife.net/u/insaneskiier)\ **Post date:** [September 14, 2006, 2:01pm UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/8 "2006-09-14T14:01:52Z")
> [@InitialD](#): > > oh and that recent drive to calgary cost me 85 bucks, went 63 on the memorial dr in the 50 zone, i didnt know it was 50, i thought it was 60, damn photoradar! pretty much anywhere in calgary is 50 hahaha, 6 lane divided highway, i know let’s go 50 ---
**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\ **Post date:** [September 17, 2006, 2:40pm UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/9 "2006-09-17T14:40:44Z")
> [@InitialD](#): > > you can use mig on stainless steel? There is stainless wire for mig, then just use straight argon for shielding gas. If you don’t care about rusting go ahead and weld it with conventional er70s-6 (mild steel) wire, it will be fine for exhaust. If you want it done right have it tig’d. ---
**Author:** ![Invalid\_Zero](https://avatars.discourse-cdn.com/v4/letter/i/ecae2f/32.png) [@Invalid\_Zero](https://forums.speedlife.net/u/Invalid_Zero)\ **Post date:** [September 17, 2006, 5:44pm UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/10 "2006-09-17T17:44:58Z")
^ That man speaks the truth. ---
**Author:** ![InitialD](https://avatars.discourse-cdn.com/v4/letter/i/d07c76/32.png) [@InitialD](https://forums.speedlife.net/u/InitialD)\ **Post date:** [September 17, 2006, 8:05pm UTC](https://forums.speedlife.net/t/need-help-tig-weld-needed/144236/11 "2006-09-17T20:05:09Z")
exhaust is done, thanks for help guys!