# Need help with design

**URL:** <https://forums.speedlife.net/t/need-help-with-design/40828>\
**Category:** NYSpeed Automotive\
**Created:** [December 27, 2007, 2:00am UTC](https://forums.speedlife.net/t/need-help-with-design/40828 "2007-12-27T02:00:17Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![BrockwayMT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brockwaymt/32/5060_2.png) [@BrockwayMT](https://forums.speedlife.net/u/BrockwayMT)\
**Post date:** [December 28, 2007, 2:47pm UTC](https://forums.speedlife.net/t/need-help-with-design/40828/14 "2007-12-28T14:47:40Z")

</div>

> [@BrockwayMT](#):
>
> If you want to adjust ride height put a jack screw up through the bottom of the frame. Reinforce the frame around where the hole goes through it. Put a cotter pin through the top of the jack bolt so it can’t come out on the track.
> 
> Now with your kart up on the stand you loosen the screws that hold the cassette and turn your jack screw up or down. Gravity will hold the axle assy’s against the screw. Adjust height on each side and retighten your lock screws.

I wasn’t really clear I meant to do this with the design as in the photo.

---

_[View the full topic](https://forums.speedlife.net/t/need-help-with-design/40828)._