# need help with swap ka24e to ka24de **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [October 28, 2007, 8:45am UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135 "2007-10-28T08:45:00Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![hengster](https://avatars.discourse-cdn.com/v4/letter/h/f14d63/32.png) [@hengster](https://forums.speedlife.net/u/hengster)\ **Post date:** [October 28, 2007, 8:45am UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/1 "2007-10-28T08:45:00Z")
ok…my story is i got a s14 ka24de from a buddy off a 97 240. the 97 wiring harness was way to complicated for me to do since it was obd-II so i went another route. i swaped the distributor, intake manifold, and ecu wiring harness to s13 ka24de. the wiring harness i got was cut but i found the plugs to splice it back together. now my problem is it runs really rough and rich, i think its running in limp or safe mode. i dont have the o2 sensor hooked up yet cuz i haveta find one outa a s13 ka24de. but would the o2 sensor make it run this bad? anyone out there with a running s13 ka24de? id like to go over my splicing in the harness to make sure its right. ill hook u up for ur time. thanks ---
**Author:** ![apex\_drifter](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@apex\_drifter](https://forums.speedlife.net/u/apex_drifter)\ **Post date:** [October 28, 2007, 11:37am UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/2 "2007-10-28T11:37:06Z")
yeah it is your 02 sensor. . .also which ECU are you using? ---
**Author:** ![silvertable58](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@silvertable58](https://forums.speedlife.net/u/silvertable58)\ **Post date:** [October 28, 2007, 1:51pm UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/3 "2007-10-28T13:51:18Z")
hes using the s13 ka24de ecu ---
**Author:** ![hengster](https://avatars.discourse-cdn.com/v4/letter/h/f14d63/32.png) [@hengster](https://forums.speedlife.net/u/hengster)\ **Post date:** [October 29, 2007, 4:34pm UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/4 "2007-10-29T16:34:17Z")
no one driving a s13 with ka24de? ---
**Author:** ![Scat](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Scat](https://forums.speedlife.net/u/Scat)\ **Post date:** [October 29, 2007, 6:22pm UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/5 "2007-10-29T18:22:36Z")
> [@hengster](#): > > no one driving a s13 with ka24de? It would help if you said where you are located. You NEED the o2 sensor, they are like 40-50 bucks at partsource or autovalue. Are you using the right maf? ---
**Author:** ![hengster](https://avatars.discourse-cdn.com/v4/letter/h/f14d63/32.png) [@hengster](https://forums.speedlife.net/u/hengster)\ **Post date:** [October 29, 2007, 6:47pm UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/6 "2007-10-29T18:47:18Z")
opps located in edm…and ya i got the maf hooked up. i just want to take at the harness, brown and grey clip by the battery to make sure my splicing is rite. ---
**Author:** ![Scat](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Scat](https://forums.speedlife.net/u/Scat)\ **Post date:** [October 30, 2007, 8:57am UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/7 "2007-10-30T08:57:04Z")
> [@hengster](#): > > opps located in edm…and ya i got the maf hooked up. i just want to take at the harness, brown and grey clip by the battery to make sure my splicing is rite. Just making sure you’re using the 91+ maf. I remember having to deal with those two wires, but I don’t remember what I did with 'em. ---
**Author:** ![hengster](https://avatars.discourse-cdn.com/v4/letter/h/f14d63/32.png) [@hengster](https://forums.speedlife.net/u/hengster)\ **Post date:** [October 30, 2007, 5:01pm UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/8 "2007-10-30T17:01:16Z")
are u talking about the 2 wires for grey clip, black with white stripe? i dont know wat to do with those either i conected them together but not sure if thats wat needs to b done. ---
**Author:** ![imported\_nismo1](https://avatars.discourse-cdn.com/v4/letter/i/76d3ee/32.png) [@imported\_nismo1](https://forums.speedlife.net/u/imported_nismo1)\ **Post date:** [October 31, 2007, 7:42pm UTC](https://forums.speedlife.net/t/need-help-with-swap-ka24e-to-ka24de/148135/9 "2007-10-31T19:42:33Z")
go get an o2 sensor, it is an O2 sensor for a reason.Than scan ur ecu for codes…