# Need Help!!

**URL:** <https://forums.speedlife.net/t/need-help/190625>\
**Category:** PittSpeed Automotive\
**Created:** [June 18, 2007, 5:47pm UTC](https://forums.speedlife.net/t/need-help/190625 "2007-06-18T17:47:37Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![BMXpaperweight](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bmxpaperweight/32/6043_2.png) [@BMXpaperweight](https://forums.speedlife.net/u/BMXpaperweight)\
**Post date:** [June 18, 2007, 5:47pm UTC](https://forums.speedlife.net/t/need-help/190625/1 "2007-06-18T17:47:37Z")

</div>

Well, i started on the Stang again today. I knew the stock towers were rusted out, but the frame as a crack in it too. The crack is on the drivers side and the passager side is a little better. Its rusted out too but doesn’t have the crack like on the driver side. I am thinking more and more about parting the car. I am going to get under the car tomorrow and look at the whole frame.

Part it or stick with it and fix it

---

<div class="post-metadata">

**Author:** ![Black\_Integra](https://avatars.discourse-cdn.com/v4/letter/b/5daacb/32.png) [@Black\_Integra](https://forums.speedlife.net/u/Black_Integra)\
**Post date:** [June 18, 2007, 5:54pm UTC](https://forums.speedlife.net/t/need-help/190625/2 "2007-06-18T17:54:18Z")

</div>

Try to see the extent of damage and/or get an estimate for repairs then go from there…

but…

if you wana get rid of it…

1. call someone from the pennysaver to come get the car for scrap.
2. How much did you pay for it? (think you’ll come close to making it back? if yes…part it. if no scrap it
3. motor still good?

---

<div class="post-metadata">

**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\
**Post date:** [June 18, 2007, 7:18pm UTC](https://forums.speedlife.net/t/need-help/190625/3 "2007-06-18T19:18:51Z")

</div>

if you are finding that much rust now i would say car is not too safe to drive IMO i would take it as a learning experience and part the car out and scrap the rest. i bet you will come close to what you have in it easily if not make money off it still

---

<div class="post-metadata">

**Author:** ![green](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/green/32/5996_2.png) [@green](https://forums.speedlife.net/u/green)\
**Post date:** [June 18, 2007, 10:54pm UTC](https://forums.speedlife.net/t/need-help/190625/4 "2007-06-18T22:54:33Z")

</div>

I keep say to part the bitch out. But our father keeps saying to fix it and sell it. Which is dick to who ever buys it. Frankly Im ready to cut the bitch in half and tell him ok fix that then.

---

<div class="post-metadata">

**Author:** ![SoLow](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solow/32/6001_2.png) [@SoLow](https://forums.speedlife.net/u/SoLow)\
**Post date:** [June 19, 2007, 12:31am UTC](https://forums.speedlife.net/t/need-help/190625/5 "2007-06-19T00:31:24Z")

</div>

> [@Damen Hale - DWI Hit and Run - IN CUSTODY! slight\_smile](https://forums.speedlife.net/t/damen-hale-dwi-hit-and-run-in-custody/30675/72):
>
> if you are finding that much rust now i would say car is not too safe to drive IMO i would take it as a learning experience and part the car out and scrap the rest. i bet you will come close to what you have in it easily if not make money off it still

---

<div class="post-metadata">

**Author:** ![4doors5gears](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4doors5gears/32/6006_2.png) [@4doors5gears](https://forums.speedlife.net/u/4doors5gears)\
**Post date:** [June 19, 2007, 6:36am UTC](https://forums.speedlife.net/t/need-help/190625/6 "2007-06-19T06:36:52Z")

</div>

Target practice FTW. I’ll sell you a Beretta.

---

<div class="post-metadata">

**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\
**Post date:** [June 19, 2007, 6:58am UTC](https://forums.speedlife.net/t/need-help/190625/7 "2007-06-19T06:58:05Z")

</div>

how much shit are you seriously going to be able to part off a rusted to hell and back 4cyl fox?.

cut your losses and scrap it

---

<div class="post-metadata">

**Author:** ![Zack01GC](https://avatars.discourse-cdn.com/v4/letter/z/a183cd/32.png) [@Zack01GC](https://forums.speedlife.net/u/Zack01GC)\
**Post date:** [June 19, 2007, 10:08am UTC](https://forums.speedlife.net/t/need-help/190625/8 "2007-06-19T10:08:01Z")

</div>

What did you pay for it?

You may be able to make that back in with the scrap steel

---

<div class="post-metadata">

**Author:** ![BMXpaperweight](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bmxpaperweight/32/6043_2.png) [@BMXpaperweight](https://forums.speedlife.net/u/BMXpaperweight)\
**Post date:** [June 19, 2007, 12:54pm UTC](https://forums.speedlife.net/t/need-help/190625/9 "2007-06-19T12:54:48Z")

</div>

400 bucks

---

<div class="post-metadata">

**Author:** ![noahTHEpurdy](https://avatars.discourse-cdn.com/v4/letter/n/87869e/32.png) [@noahTHEpurdy](https://forums.speedlife.net/u/noahTHEpurdy)\
**Post date:** [June 19, 2007, 1:26pm UTC](https://forums.speedlife.net/t/need-help/190625/10 "2007-06-19T13:26:31Z")

</div>

> [@Damen Hale - DWI Hit and Run - IN CUSTODY! slight\_smile](https://forums.speedlife.net/t/damen-hale-dwi-hit-and-run-in-custody/30675/72):
>
> if you are finding that much rust now i would say car is not too safe to drive IMO i would take it as a learning experience and part the car out and scrap the rest. i bet you will come close to what you have in it easily if not make money off it still

---

<div class="post-metadata">

**Author:** ![Zack01GC](https://avatars.discourse-cdn.com/v4/letter/z/a183cd/32.png) [@Zack01GC](https://forums.speedlife.net/u/Zack01GC)\
**Post date:** [June 19, 2007, 3:19pm UTC](https://forums.speedlife.net/t/need-help/190625/11 "2007-06-19T15:19:37Z")

</div>

I think steel is running at $0.15 per pound right now or something like that.
