# need ideas to remove a bolt with a rounded socket head?

**URL:** <https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403>\
**Category:** NYSpeed Off Topic\
**Created:** [July 30, 2008, 9:53am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403 "2008-07-30T09:53:34Z")\
**Posts on this page:** 10\
**Page:** 2

<div class="post-metadata">

**Author:** ![walter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/walter/32/7202_2.png) [@walter](https://forums.speedlife.net/u/walter)\
**Post date:** [July 31, 2008, 6:13am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/21 "2008-07-31T06:13:44Z")

</div>

He isn’t going to break an ezout big enough to fit in there.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [July 31, 2008, 6:16am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/22 "2008-07-31T06:16:43Z")

</div>

i have never had an easy out work well before…

welding something to it might be your best bet…

---

<div class="post-metadata">

**Author:** ![Shifty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shifty/32/4959_2.png) [@Shifty](https://forums.speedlife.net/u/Shifty)\
**Post date:** [July 31, 2008, 6:45am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/23 "2008-07-31T06:45:39Z")

</div>

Remove both hand grips, place the left side of the handle bar in a vice & slowly hacksaw the striped bolt off:

![http://i218.photobucket.com/albums/cc111/BMWFTW1/0731080049.png?t=1217511729](http://i218.photobucket.com/albums/cc111/BMWFTW1/0731080049.png?t=1217511729)

---

<div class="post-metadata">

**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\
**Post date:** [July 31, 2008, 7:10am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/24 "2008-07-31T07:10:28Z")

</div>

I ran into pretty much the same problem with a coilover allen head (which is recessed into the collar like a motherfucker). I thought long and hard about it and thought about how much work I wanted to put into a $30 part. I ended up drilling it out completely and retapping for a slightly larger thread size.

---

<div class="post-metadata">

**Author:** ![Garick](https://avatars.discourse-cdn.com/v4/letter/g/8797f3/32.png) [@Garick](https://forums.speedlife.net/u/Garick)\
**Post date:** [July 31, 2008, 9:47am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/25 "2008-07-31T09:47:01Z")

</div>

I think we’ve covered all the options, I’ll try em out when I have time.

The wrench was the right size and the bolt is way tighter than it should be. Its sitting in some pb blaster now.

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [July 31, 2008, 10:47am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/26 "2008-07-31T10:47:36Z")

</div>

> [@JayS](#):
>
> Not a fan of ez-outs. You’re taking something that was stuck bad enough to strip in the first place and risking snapping off a metal device harder than any known drill bit in the hole.
> 
> If the head stripped because the wrong sized wrench was used maybe, because it might back out easily.

I just snapped a big ole ez-out the other day. I gave up and bought a new part. Not worth fucking with after a while.

---

<div class="post-metadata">

**Author:** ![justa4door](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justa4door/32/7259_2.png) [@justa4door](https://forums.speedlife.net/u/justa4door)\
**Post date:** [July 31, 2008, 10:55am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/27 "2008-07-31T10:55:53Z")

</div>

pm mindless… he works at a bike place

---

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [July 31, 2008, 11:45am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/28 "2008-07-31T11:45:14Z")

</div>

have you tried beer?

---

<div class="post-metadata">

**Author:** ![justa4door](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justa4door/32/7259_2.png) [@justa4door](https://forums.speedlife.net/u/justa4door)\
**Post date:** [July 31, 2008, 11:46am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/29 "2008-07-31T11:46:56Z")

</div>

> [@Nikuk](#):
>
> have you tried beer?

:lol:

---

<div class="post-metadata">

**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\
**Post date:** [July 31, 2008, 11:48am UTC](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403/30 "2008-07-31T11:48:52Z")

</div>

> [@justa4door](#):
>
> :lol:

never heard of beer muscles?

[Previous page](https://forums.speedlife.net/t/need-ideas-to-remove-a-bolt-with-a-rounded-socket-head/52403.md?page=1)
