# Need Pinout for 97-00 Forester Cluster and 01+ Ones

**URL:** <https://forums.speedlife.net/t/need-pinout-for-97-00-forester-cluster-and-01-ones/45598>\
**Category:** NYSpeed Automotive\
**Created:** [March 24, 2008, 11:41pm UTC](https://forums.speedlife.net/t/need-pinout-for-97-00-forester-cluster-and-01-ones/45598 "2008-03-24T23:41:15Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\
**Post date:** [March 24, 2008, 11:41pm UTC](https://forums.speedlife.net/t/need-pinout-for-97-00-forester-cluster-and-01-ones/45598/1 "2008-03-24T23:41:15Z")

</div>

So basically i wanna go from this ![http://i7.ebayimg.com/01/i/000/a9/d9/fe6d_3.JPG](http://i7.ebayimg.com/01/i/000/a9/d9/fe6d_3.JPG)

to this  
 ![http://i7.ebayimg.com/01/i/000/d7/ee/ad85_1.JPG](http://i7.ebayimg.com/01/i/000/d7/ee/ad85_1.JPG)

So i need the pinout on the 98 and the 01 cluster so i can rewire it if possible.  
Then i will write a DIY thread to let people do the same. They are not plug and play so u will have to get a 01 cluster with a the male connector and alittle bit of wire…  
you will hve to cut off your harness on the car.

I have done a cluster swap in my honda civic so i dont think this will be too bad.  
If you have access to the pinout for the forester please post!! Thank you