# Need some help...or ideas
**URL:** https://forums.speedlife.net/t/need-some-help-or-ideas/46097
**Category:** NYSpeed Automotive
**Created:** [April 2, 2008, 1:04pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097 "2008-04-02T13:04:53Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@JCE814](https://forums.speedlife.net/u/JCE814)
#### Post date: [April 2, 2008, 1:04pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/1 "2008-04-02T13:04:53Z")
Hey everybody,
I have a G20 Cargo Van and i was seeing if anybody can give me any ideas on how to put in 2 Rows of seats. Seeing that there are no places in it to lock in the seats…I need a way to secure them down…Please help.
Thanks.
---
### Author:  [@SVT3945](https://forums.speedlife.net/u/SVT3945)
#### Post date: [April 2, 2008, 1:11pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/2 "2008-04-02T13:11:12Z")
duct tape or chuck norris urine take your pick
---
### Author:  [@JCE814](https://forums.speedlife.net/u/JCE814)
#### Post date: [April 2, 2008, 1:13pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/3 "2008-04-02T13:13:22Z")
> [@SVT3945](#):
>
> duct tape or chuck norris urine take your pick
HAHAHAHAHA…Come on!!! That was hilarious but this is no laughing matter.
---
### Author:  [@JCE814](https://forums.speedlife.net/u/JCE814)
#### Post date: [April 2, 2008, 1:15pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/4 "2008-04-02T13:15:33Z")
> [@SVT3945](#):
>
> duct tape or chuck norris urine take your pick
Besides Norris came to piss on the floor and ended up spin kicking me in the face.
---
### Author:  [@AfXtc777](https://forums.speedlife.net/u/AfXtc777)
#### Post date: [April 2, 2008, 1:32pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/5 "2008-04-02T13:32:08Z")
> [@JCE814](#):
>
> Besides Norris came to piss on the floor and ended up spin kicking me in the face.
wow you suck
it’s a fucking roundhouse kick!!!
and if there is no place to bolt them, maybe go to a place that builds trailers?
Have them weld up some type of mounting bracket and then bolt it in?
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [April 2, 2008, 1:40pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/6 "2008-04-02T13:40:01Z")
it’s unlikely that there is anywhere that is reputable that is willing to accept the liability of holding people securely in the even of a collision…
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [April 2, 2008, 1:42pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/7 "2008-04-02T13:42:09Z")
Bolt them through the floor and secure them on the bottom with some steel plate. Reinforce the area that the bolts go through from the bottom. You could even tack the plate to the bottom of the floor for good measure. I’m sure G20’s came with multiple rows of seats, stop by a junk yard and look how the factory did it.
---
### Author:  [@Boomin99GT](https://forums.speedlife.net/u/Boomin99GT)
#### Post date: [April 2, 2008, 1:52pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/8 "2008-04-02T13:52:17Z")
This guy is a liar… if Chuck Norris had roundhouse kicked him he would not be alive today to tell us about it. I call Shenanigans.
---
### Author:  [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)
#### Post date: [April 2, 2008, 2:07pm UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/9 "2008-04-02T14:07:58Z")
> [@newman](#):
>
> it’s unlikely that there is anywhere that is reputable that is willing to accept the liability of holding people securely in the even **t** of a collision…
No way, you made a mistake. 🙂
I’d bolt them down with extra metal supports for good measure…
---
### Author:  [@JCE814](https://forums.speedlife.net/u/JCE814)
#### Post date: [April 3, 2008, 6:50am UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/10 "2008-04-03T06:50:21Z")
> [@Pauly](#):
>
> Bolt them through the floor and secure them on the bottom with some steel plate. Reinforce the area that the bolts go through from the bottom. You could even tack the plate to the bottom of the floor for good measure. I’m sure G20’s came with multiple rows of seats, stop by a junk yard and look how the factory did it.
Thanks alot I’m going to look into that. I know they made G20’s with seats so I’m sure i would be able to find some. If im not mistaken they had three rows of seats. Hopefully i can figure something out.
---
### Author:  [@Avatar](https://forums.speedlife.net/u/Avatar)
#### Post date: [April 3, 2008, 7:02am UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/11 "2008-04-03T07:02:55Z")
+1 to looking at how the factory did it. I don’t imagine it would be too hard. Just bolt it through to the frame. You just have to figure out where to mount them.
---
### Author:  [@Viper966](https://forums.speedlife.net/u/Viper966)
#### Post date: [April 3, 2008, 7:35am UTC](https://forums.speedlife.net/t/need-some-help-or-ideas/46097/12 "2008-04-03T07:35:08Z")
if the factory offered it, i would bet that tehre are stamping marks onthe floor as to where the bolts would go through