# Need some help with torque converter seal 700r4

**URL:** <https://forums.speedlife.net/t/need-some-help-with-torque-converter-seal-700r4/192595>\
**Category:** PittSpeed Automotive\
**Created:** [September 23, 2007, 10:19am UTC](https://forums.speedlife.net/t/need-some-help-with-torque-converter-seal-700r4/192595 "2007-09-23T10:19:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![91blazins10](https://avatars.discourse-cdn.com/v4/letter/9/ecc23a/32.png) [@91blazins10](https://forums.speedlife.net/u/91blazins10)\
**Post date:** [September 23, 2007, 10:19am UTC](https://forums.speedlife.net/t/need-some-help-with-torque-converter-seal-700r4/192595/1 "2007-09-23T10:19:47Z")

</div>

Im installing a new torque converter in the Typhoon and I decided to install a new seal in the trans just to make sure it wouldnt leak, problem is I cant get the old one out, It looks like theres a little groove behind the seal to pry it out, but I tried and cant get it, I end up scratching everything up. Is there a special tool I need to remove this?

---

<div class="post-metadata">

**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\
**Post date:** [September 23, 2007, 11:13am UTC](https://forums.speedlife.net/t/need-some-help-with-torque-converter-seal-700r4/192595/2 "2007-09-23T11:13:07Z")

</div>

you can get a seal removal tool from part store. about 10 bucks and handy to have anyways.

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [September 23, 2007, 2:15pm UTC](https://forums.speedlife.net/t/need-some-help-with-torque-converter-seal-700r4/192595/3 "2007-09-23T14:15:59Z")

</div>

> [@Getting to Task Manager.....](https://forums.speedlife.net/t/getting-to-task-manager/32609/26):
>
> you can get a seal removal tool from part store. about 10 bucks and handy to have anyways.

that or a flat screw driver & small hammer.MAKE SURE U LOCK-TITE IT IN!

---

<div class="post-metadata">

**Author:** ![91blazins10](https://avatars.discourse-cdn.com/v4/letter/9/ecc23a/32.png) [@91blazins10](https://forums.speedlife.net/u/91blazins10)\
**Post date:** [September 23, 2007, 4:35pm UTC](https://forums.speedlife.net/t/need-some-help-with-torque-converter-seal-700r4/192595/4 "2007-09-23T16:35:19Z")

</div>

> [@Need a carfax?](https://forums.speedlife.net/t/need-a-carfax/31365/2):
>
> that or a flat screw driver & small hammer.MAKE SURE U LOCK-TITE IT IN!

that worked great:bigthumb: