# Need some help **URL:** \ **Category:** Shift518 Automotive\ **Created:** [May 2, 2010, 2:41pm UTC](https://forums.speedlife.net/t/need-some-help/251881 "2010-05-02T14:41:13Z")\ **Posts on this page:** 20\ **Page:** 9
**Author:** ![20wrx09](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/20wrx09/32/6532_2.png) [@20wrx09](https://forums.speedlife.net/u/20wrx09)\ **Post date:** [May 4, 2010, 11:37am UTC](https://forums.speedlife.net/t/need-some-help/251881/161 "2010-05-04T11:37:33Z")
hey dom do you know if you have upgraded motor mounts?? the stock mounts are only rated to handle around 300 crank hp/ 300 crank torque. so that could be something to look into ---
**Author:** ![Auto0utcast1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/auto0utcast1/32/6546_2.png) [@Auto0utcast1](https://forums.speedlife.net/u/Auto0utcast1)\ **Post date:** [May 4, 2010, 11:38am UTC](https://forums.speedlife.net/t/need-some-help/251881/162 "2010-05-04T11:38:26Z")
> [@RIP frowning](https://forums.speedlife.net/t/rip/31622/41): > > And all 4 were replaced under warranty by cosworth with no questions asked…you really don’t seem to know much in this situation at all. You should never have brought this up. paul i said several times that i had no problems with synapse. i know the cams were warrantied, and i knew the wrist pin issue as well. i remember all of that very well. i however was unaware the RAW motor shit the bed. i apologise if you took it as anything other than facts being posted. ill say it again i have ZERO problems with synapse. i just think adam would be the man I would go to for subaru work. nothing personal man. ---
**Author:** ![Auto0utcast1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/auto0utcast1/32/6546_2.png) [@Auto0utcast1](https://forums.speedlife.net/u/Auto0utcast1)\ **Post date:** [May 4, 2010, 11:39am UTC](https://forums.speedlife.net/t/need-some-help/251881/163 "2010-05-04T11:39:38Z")
> [@parking outdoors in winter](https://forums.speedlife.net/t/parking-outdoors-in-winter/31649/4): > > hey dom do you know if you have upgraded motor mounts?? > the stock mounts are only rated to handle around 300 crank hp/ 300 crank torque. so that could be something to look into this is the first ive ever heard of this. ive personally seen 5-6-700hp sti’s running stock mounts without problems. ---
**Author:** ![20wrx09](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/20wrx09/32/6532_2.png) [@20wrx09](https://forums.speedlife.net/u/20wrx09)\ **Post date:** [May 4, 2010, 11:44am UTC](https://forums.speedlife.net/t/need-some-help/251881/164 "2010-05-04T11:44:11Z")
> [@RIP frowning](https://forums.speedlife.net/t/rip/31622/44): > > this is the first ive ever heard of this. ive personally seen 5-6-700hp sti’s running stock mounts without problems. well my source of this information is > **[NASIOC - View Single Post - Public Service Announcement. "I want 400whp!"...](https://forums.nasioc.com/forums/showpost.php?p=20142198&postcount=1)** > > Welcome to the North American Subaru Impreza Owners Club the largest Subaru car club website for performance information on all makes of Subaru including the Impreza, WRX, STI, Legacy, Forester, Tribeca, Baja, and SVX. We also have forums dedicated... scroll to where it says “So great, now you have 400whp. Lets look at what the hidden costs are.” ---
**Author:** ![g60](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g60](https://forums.speedlife.net/u/g60)\ **Post date:** [May 4, 2010, 12:16pm UTC](https://forums.speedlife.net/t/need-some-help/251881/165 "2010-05-04T12:16:03Z")
> [@On another topic](https://forums.speedlife.net/t/31604/41): > > paul i said several times that i had no problems with synapse. i know the cams were warrantied, and i knew the wrist pin issue as well. i remember all of that very well. i however was unaware the RAW motor shit the bed. i apologise if you took it as anything other than facts being posted. ill say it again i have ZERO problems with synapse. i just think adam would be the man I would go to for subaru work. nothing personal man. Who cares where you take your imaginary STI. ---
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [May 4, 2010, 12:32pm UTC](https://forums.speedlife.net/t/need-some-help/251881/166 "2010-05-04T12:32:51Z")
> [@parking outdoors in winter](https://forums.speedlife.net/t/parking-outdoors-in-winter/31649/4): > > hey dom do you know if you have upgraded motor mounts?? > the stock mounts are only rated to handle around 300 crank hp/ 300 crank torque. so that could be something to look into > [@06/29/07 - Huge Banger at Jim's (Chino's) House](https://forums.speedlife.net/t/06-29-07-huge-banger-at-jims-chinos-house/31579/70): > > well my source of this information is > [http://forums.nasioc.com/forums/showpost.php?p=20142198&postcount=1](http://forums.nasioc.com/forums/showpost.php?p=20142198&postcount=1) > scroll to where it says “So great, now you have 400whp. > Lets look at what the hidden costs are.” Quit while you’re ahead because that’s the dumbest thing I’ve ever heard. :rofl You really need to stop listening to everything on nazicock or you’ll end up spending $580 on a bling-a-ling dual catch can setup like you were telling Dom to do. :retardclap ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [May 4, 2010, 12:38pm UTC](https://forums.speedlife.net/t/need-some-help/251881/167 "2010-05-04T12:38:39Z")
[quote=“Auto0utcast.,post:24,topic:31623"”] off topic but wayne what was ur 1/8th et/mph [/quote] my old turd went 7.757 @ 94.01 in the 1/8th oh and ya need to cool it a bit, ok maybe ALOT. the saying die in a fire bit. not happening man. i thoroughly enjoy banning you and i wont hesitate to do it again if you spout off another ringer like that. ---
**Author:** ![20wrx09](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/20wrx09/32/6532_2.png) [@20wrx09](https://forums.speedlife.net/u/20wrx09)\ **Post date:** [May 4, 2010, 12:41pm UTC](https://forums.speedlife.net/t/need-some-help/251881/168 "2010-05-04T12:41:53Z")
> [@world's fastest/longest zip line. this \> rollercoasters](https://forums.speedlife.net/t/worlds-fastest-longest-zip-line-this-rollercoasters/31648/9): > > Quit while you’re ahead because that’s the dumbest thing I’ve ever heard. :rofl > You really need to stop listening to everything on nazicock or you’ll end up spending $580 on a bling-a-ling dual catch can setup like you were telling Dom to do. :retardclap so who am i supposed to listen to then??? definitely not going to be you. and why would he need to pay $580 for an air/oil separator when its $290? ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [May 4, 2010, 12:47pm UTC](https://forums.speedlife.net/t/need-some-help/251881/169 "2010-05-04T12:47:25Z")
make one out of a mt dew bottle… free from the trash can. ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [May 4, 2010, 12:47pm UTC](https://forums.speedlife.net/t/need-some-help/251881/170 "2010-05-04T12:47:55Z")
> [@who's bike did i beat tonight?](https://forums.speedlife.net/t/whos-bike-did-i-beat-tonight/31391/98): > > so who am i supposed to listen to then??? definitely not going to be you. > > and why would he need to pay $580 for an air/oil separator when its $290? well you obviously listened to them and look how nice your car runs, slower than stock!! ---
**Author:** ![skateshelter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/skateshelter/32/6337_2.png) [@skateshelter](https://forums.speedlife.net/u/skateshelter)\ **Post date:** [May 4, 2010, 12:48pm UTC](https://forums.speedlife.net/t/need-some-help/251881/171 "2010-05-04T12:48:25Z")
> [@who's bike did i beat tonight?](https://forums.speedlife.net/t/whos-bike-did-i-beat-tonight/31391/98): > > so who am i supposed to listen to then??? definitely not going to be you. > > and why would he need to pay $580 for an air/oil separator when its $290? Ok listen I don’t need motor mounts that’s not my problem lol. The catch can setup that chuck sent me will work great and its cheap. I’m at shako right now and they are making me a oil feed line then I will be able to start the motor up again and see how she runs. I cleaned the pvc. Valve yesterday it was cloged with a lot of shit so maybe that helped to well see. And my typeing sucks on my phone hahaha ---
**Author:** ![20wrx09](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/20wrx09/32/6532_2.png) [@20wrx09](https://forums.speedlife.net/u/20wrx09)\ **Post date:** [May 4, 2010, 12:50pm UTC](https://forums.speedlife.net/t/need-some-help/251881/172 "2010-05-04T12:50:56Z")
> [@Small house on G.I.](https://forums.speedlife.net/t/small-house-on-g-i/31652/4): > > Ok listen I don’t need motor mounts that’s not my problem lol. The catch can setup that chuck sent me will work great and its cheap. I’m at shako right now and they are making me a oil feed line then I will be able to start the motor up again and see how she runs. I cleaned the pvc. Valve yesterday it was cloged with a lot of shit so maybe that helped to well see. And my typeing sucks on my phone hahaha it was only a suggestion. relax ---
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [May 4, 2010, 12:51pm UTC](https://forums.speedlife.net/t/need-some-help/251881/173 "2010-05-04T12:51:09Z")
> [@who's bike did i beat tonight?](https://forums.speedlife.net/t/whos-bike-did-i-beat-tonight/31391/98): > > so who am i supposed to listen to then??? definitely not going to be you. > > and why would he need to pay $580 for an air/oil separator when its $290? Yeah definitely don’t listen to me. I’ve only had two turbo subaru’s in the last 3 years. The sti ej257 needs two cans due to the way the pcv system is designed. Dual catch can setup = 2 catchcans :retardclap 290 + 290 = $580 I would rather pay 130 for 2 well engineered cans than 290 for one of the ricer ixizblingbox’s. ---
**Author:** ![20wrx09](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/20wrx09/32/6532_2.png) [@20wrx09](https://forums.speedlife.net/u/20wrx09)\ **Post date:** [May 4, 2010, 1:03pm UTC](https://forums.speedlife.net/t/need-some-help/251881/174 "2010-05-04T13:03:05Z")
> [@who's bike did i beat tonight?](https://forums.speedlife.net/t/whos-bike-did-i-beat-tonight/31391/100): > > Yeah definitely don’t listen to me. I’ve only had two turbo subaru’s in the last 3 years. > > The sti ej257 needs two cans due to the way the pcv system is designed. > Dual catch can setup = 2 catchcans :retardclap > 290 + 290 = $580 > > I would rather pay 130 for 2 well engineered cans than 290 for one of the ricer ixizblingbox’s. are you serious… that air/oil separator has two inlets for both portions of the pcv system. and i personally know of three people all who have sti’s that are running ONE not two. so i still dont get what you are talking about needing two…:crazy ---
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [May 4, 2010, 1:06pm UTC](https://forums.speedlife.net/t/need-some-help/251881/175 "2010-05-04T13:06:22Z")
> [@Another rocket down....](https://forums.speedlife.net/t/another-rocket-down/31623/31): > > are you serious… that air/oil separator has two inlets for both portions of the pcv system. and i personally know of three people all who have sti’s that are running ONE not two. so i still dont get what you are talking about needing two…:crazy I was under the impression it only had 2 inlets. Does this change my view on the product? Fuck no! Who wants to pay $290 for a catch can? :rofl ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [May 4, 2010, 1:09pm UTC](https://forums.speedlife.net/t/need-some-help/251881/176 "2010-05-04T13:09:16Z")
tards on unysoc do want to pay 290 ---
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [May 4, 2010, 1:12pm UTC](https://forums.speedlife.net/t/need-some-help/251881/177 "2010-05-04T13:12:14Z")
> [@FS: 65in. Projection TV](https://forums.speedlife.net/t/fs-65in-projection-tv/31643/13): > > tards on unysoc do want to pay 290 Obviously. I guess it looks “cool.” ---
**Author:** ![20wrx09](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/20wrx09/32/6532_2.png) [@20wrx09](https://forums.speedlife.net/u/20wrx09)\ **Post date:** [May 4, 2010, 1:13pm UTC](https://forums.speedlife.net/t/need-some-help/251881/178 "2010-05-04T13:13:19Z")
well ming’s site is listing it as $290, but i found a site that listed it for $275. oh well ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [May 4, 2010, 1:23pm UTC](https://forums.speedlife.net/t/need-some-help/251881/179 "2010-05-04T13:23:34Z")
my catchcan was 40$. it was very effective. some MFactory joint. ---
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [May 4, 2010, 1:25pm UTC](https://forums.speedlife.net/t/need-some-help/251881/180 "2010-05-04T13:25:03Z")
> [@The baby blue shark hood neon tried chasing me down...](https://forums.speedlife.net/t/the-baby-blue-shark-hood-neon-tried-chasing-me-down/30686/913): > > well ming’s site is listing it as $290, but i found a site that listed it for $275. oh well Well it’s just my opinion, but I would rather pay $130 for this than $290 for this ![http://www.ixizconcept.com/ixizaosep/ixizaosep_v4p.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/5/4/545a085ca2ce295ce50dd0e1619fcb7738406a33.jpeg) [Previous page](https://forums.speedlife.net/t/need-some-help/251881.md?page=8) [Next page](https://forums.speedlife.net/t/need-some-help/251881.md?page=10)