# Need some serious help(Overheating/Gas)

**URL:** https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197
**Category:** SON240sx Automotive
**Created:** [February 15, 2008, 8:25am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197 "2008-02-15T08:25:49Z")
**Posts on this page:** 9
**Page:** 1

<div class="post-metadata">

### Author: ![Noga](https://avatars.discourse-cdn.com/v4/letter/n/f19dbf/32.png) [@Noga](https://forums.speedlife.net/u/Noga)
#### Post date: [February 15, 2008, 8:25am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/1 "2008-02-15T08:25:49Z")

</div>

Hey thanks in advance for taking the time to look at my issues.

My car will over heat driving normally after 10-15 minutes between 2-3k rpm.  
I have replaced the Water pump/thermostat brand new and have put in a different used rad. I still have a heating issue. The hoses seem to be in good condition and have been replaced since factory though not by me. I do seem to be losing a “Small” amout of coolant though it could just be from overflow. I have no idea what could be causing this issue. During my driving home from work thismorning I pull my car over into a parking lot as it is overheating and I find that the top rad hose has good pressure and is hot, however lower rad hose has no pressure and is icecold.

My other issue is injector #4 seems to have a leak in it and though I expected to get some lower gas milage I am getting like 150KM to a tank of 91 or 94. I dunno if these to problems are interrelated I really got no idea how that stuff works inside the motor.

If anyone has any other insight such as if thats the right amount of gas I should be losing(Dont worry I am replacing) or if I got another leak as well that would be greatly appreciated.

Thanks  
Kyle

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [February 15, 2008, 8:33am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/2 "2008-02-15T08:33:36Z")

</div>

Try hooking up a powerwasher(not crazy pressure though) to your heater core hoses, it could be clogged bad, ive had that problem before

---

<div class="post-metadata">

### Author: ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)
#### Post date: [February 15, 2008, 8:41am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/3 "2008-02-15T08:41:24Z")

</div>

you sure that the used rad you put in isn’t clogged? sounds like a blocked rad to me. i’d try swapping it with a known good one first.

---

<div class="post-metadata">

### Author: ![Noga](https://avatars.discourse-cdn.com/v4/letter/n/f19dbf/32.png) [@Noga](https://forums.speedlife.net/u/Noga)
#### Post date: [February 15, 2008, 8:44am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/4 "2008-02-15T08:44:51Z")

</div>

> [@Huge Dell Battery Recall](https://forums.speedlife.net/t/huge-dell-battery-recall/15947/4):
>
> you sure that the used rad you put in isn’t clogged? sounds like a blocked rad to me. i’d try swapping it with a known good one first.

I cleaned it out pretty nice and it ran through pretty solid. If not ill be running chase down tonight!

---

<div class="post-metadata">

### Author: ![Theo23](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Theo23](https://forums.speedlife.net/u/Theo23)
#### Post date: [February 15, 2008, 8:50am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/5 "2008-02-15T08:50:30Z")

</div>

You might have a blown head gasket. Go to a garage and get them to do a leakdown test. One of your cylinders could be pressurizing your cooling system.

---

<div class="post-metadata">

### Author: ![spooolin](https://avatars.discourse-cdn.com/v4/letter/s/48db29/32.png) [@spooolin](https://forums.speedlife.net/u/spooolin)
#### Post date: [February 15, 2008, 8:51am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/6 "2008-02-15T08:51:16Z")

</div>

sounds like a faulty thermostat… or rad… It wouldent be the heater core… as that doesent cool the car… that just supplys heat for the cabin… its either a thermostat or bad and cloged rad…

ALSO if its a bad head gasket you can take the rad cap off and see bubbles comming to the top… I wouldent suspect the head gasket tho… because the lower rad hose would be warm… Somthing is preventing the coolant from flowing…

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [February 15, 2008, 9:02am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/7 "2008-02-15T09:02:46Z")

</div>

The heater core can have a part to do with it

but yeah that rad is probably fucked

---

<div class="post-metadata">

### Author: ![CrypticNissan](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crypticnissan/32/5663_2.png) [@CrypticNissan](https://forums.speedlife.net/u/CrypticNissan)
#### Post date: [February 15, 2008, 9:28am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/8 "2008-02-15T09:28:27Z")

</div>

its your head gasket, check your oil… does it look milky? do you see any forgien wet spots under where your head meets the block??

---

<div class="post-metadata">

### Author: ![Noga](https://avatars.discourse-cdn.com/v4/letter/n/f19dbf/32.png) [@Noga](https://forums.speedlife.net/u/Noga)
#### Post date: [February 15, 2008, 9:51am UTC](https://forums.speedlife.net/t/need-some-serious-help-overheating-gas/113197/9 "2008-02-15T09:51:25Z")

</div>

> [@\*official BBQ pics thread\*](https://forums.speedlife.net/t/official-bbq-pics-thread/15933/20):
>
> its your head gasket, check your oil… does it look milky? do you see any forgien wet spots under where your head meets the block??

Oil is mint.
