# Need welding help/engine hoist! Windsor

**URL:** <https://forums.speedlife.net/t/need-welding-help-engine-hoist-windsor/231573>\
**Category:** SON240sx Automotive\
**Created:** [July 4, 2013, 5:21pm UTC](https://forums.speedlife.net/t/need-welding-help-engine-hoist-windsor/231573 "2013-07-04T17:21:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mx4evr](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@mx4evr](https://forums.speedlife.net/u/mx4evr)\
**Post date:** [July 4, 2013, 5:21pm UTC](https://forums.speedlife.net/t/need-welding-help-engine-hoist-windsor/231573/1 "2013-07-04T17:21:26Z")

</div>

Heya,

I went ahead and ground out all my rust in hopes of welding it back in with a crummy 110 Mig welder. Well, it didn’t quite pan out. It was either the mig was too shitty or my buddy doing it didn’t have the skills to pull it off.

I also have a RB25 in my dd’s trunk ready to be pulled and dropped in. Before I go and buy one, I was hoping someone here would have an engine hoist I could possibly borrow.

Thanks in advance!

Nick

---

<div class="post-metadata">

**Author:** ![Steve660](https://avatars.discourse-cdn.com/v4/letter/s/ecb155/32.png) [@Steve660](https://forums.speedlife.net/u/Steve660)\
**Post date:** [July 5, 2013, 1:22pm UTC](https://forums.speedlife.net/t/need-welding-help-engine-hoist-windsor/231573/2 "2013-07-05T13:22:20Z")

</div>

Probably the buddy or the welder wasn’t set properly. The metal on a car is thin so 110 has no problem getting penetration.

---

<div class="post-metadata">

**Author:** ![240pimp](https://avatars.discourse-cdn.com/v4/letter/2/848f3c/32.png) [@240pimp](https://forums.speedlife.net/u/240pimp)\
**Post date:** [July 5, 2013, 1:55pm UTC](https://forums.speedlife.net/t/need-welding-help-engine-hoist-windsor/231573/3 "2013-07-05T13:55:59Z")

</div>

location is the problem.