# need wheel bearings replaced **URL:** \ **Category:** Classifieds\ **Created:** [October 23, 2008, 7:32pm UTC](https://forums.speedlife.net/t/need-wheel-bearings-replaced/239726 "2008-10-23T19:32:03Z")\ **Posts on this page:** 5\ **Page:** 3
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [October 26, 2008, 7:58pm UTC](https://forums.speedlife.net/t/need-wheel-bearings-replaced/239726/41 "2008-10-26T19:58:12Z")
\*\>DSM /world ---
**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\ **Post date:** [October 26, 2008, 8:15pm UTC](https://forums.speedlife.net/t/need-wheel-bearings-replaced/239726/42 "2008-10-26T20:15:46Z")
> [@cazwrx187](#): > > \*\>DSM /world i concur with you chuck. > [@Boxersix](#): > > Who have you gone to that couldn’t get that bearing assembly out of the upright? If I wasn’t so booked out this week I’d do it without question. I “may” be able to sneak you in Friday morning but I won’t know until Thurday evening, that is if you don’t get it taken care of by then. we tried torching then air hammer it and i was back at square one where i tried it a few weeks ago with my puller. its stuck in the axle and it wouldnt move. i think its about time someone came up with a alternative way to solve this problem :nod ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [October 26, 2008, 8:52pm UTC](https://forums.speedlife.net/t/need-wheel-bearings-replaced/239726/43 "2008-10-26T20:52:29Z")
The axel is actually seized in the hub assembly. You would have to either press the axel out the hub, then replace the bearing and axel. Or just pick up a new hub and axel, then get the bearing pressed on to the hub. I heated the crap out the entire thing today and not a budge. ---
**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\ **Post date:** [October 26, 2008, 9:41pm UTC](https://forums.speedlife.net/t/need-wheel-bearings-replaced/239726/44 "2008-10-26T21:41:30Z")
> [@Reckone](#): > > The axel is actually seized in the hub assembly. You would have to either press the axel out the hub, then replace the bearing and axel. Or just pick up a new hub and axel, then get the bearing pressed on to the hub. > > I heated the crap out the entire thing today and not a budge. thanks for the tip. and thanks again for helping me out today man. i appreciate it :nod ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [October 27, 2008, 6:52pm UTC](https://forums.speedlife.net/t/need-wheel-bearings-replaced/239726/45 "2008-10-27T18:52:18Z")
> [@Reckone](#): > > The axel is actually seized in the hub assembly. You would have to either press the axel out the hub, then replace the bearing and axel. Or just pick up a new hub and axel, then get the bearing pressed on to the hub. > > I heated the crap out the entire thing today and not a budge. mitsu has a puller for this problem its big but it works obviously ya aint gonna get the puller but ya need to use a real torch on it and get the whole hub glowin as ya gonna change it anyway and a good air hammer it will come apart ive done it and worked on worse trust me [Previous page](https://forums.speedlife.net/t/need-wheel-bearings-replaced/239726.md?page=2)