# New AEM intake, Where's the O2 Sensor Go?
**URL:** https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383
**Category:** PittSpeed Automotive
**Created:** [April 1, 2006, 9:19pm UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383 "2006-04-01T21:19:36Z")
**Posts on this page:** 20
**Page:** 2
### Author:  [@burnyd](https://forums.speedlife.net/u/burnyd)
#### Post date: [April 2, 2006, 3:20am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/21 "2006-04-02T03:20:25Z")
your car is going to be so fast now.
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [April 2, 2006, 5:53am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/22 "2006-04-02T05:53:46Z")
> [@The1SloShelby](#):
>
> where did you get them “AEM” intake…?
>
> if its a real AEM intake it should go in between pipes with 2 rubber couplers…
> unless its a fake ebay intake…
>
> my bet is you dont know how to install it and messed it up :dunno:
> [@flyinglow57](#):
>
> holey balls. i actually agree with tihs tool bag…
>
> and dalifts… we havent totally figured out if she is talkin about the MAF or the IAT sensor. if its about 2-3" around then its the Mass Air. if its about the size of a spark plug. its the intake air temp sensor. if its the MAF then i wouldnt drive it until you get it put in… because the car is gonna run like poop (im actually surprised that it actually runs as is)
x2 :bash: stop the internet :ugh:
---
### Author:  [@yamaha](https://forums.speedlife.net/u/yamaha)
#### Post date: [April 2, 2006, 6:11am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/23 "2006-04-02T06:11:46Z")
That year Tiburon has a MAF and IAT, she is going to need to cut and drill a hole for both parts or else your car is going to run like shit.
Tuscani\_Chick, if you dont know what your doing, you can seriosuly fuck something up. Assuming your a idiot, which you are, the MAF reads the amount of air coming into the throttle body and adjust the air/fuel ratio for the car. And you also need the IAT for your engine. Splicing in a resistor to the IAT sensor will also throw a CEL. Hyundai ECU’s are extremely finicky.
Seriously, you need to stop what your doing, go to the forum I told you about numerous times in other posts, such at [www.newtiburon.com](http://www.newtiburon.com), and ask there. You going to continue to have a CEL and be a idiot by asking these types of questions without doing any type of viable research.
---
### Author:  [@Tuscani\_Chick](https://forums.speedlife.net/u/Tuscani_Chick)
#### Post date: [April 2, 2006, 7:43am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/24 "2006-04-02T07:43:47Z")
> [@dalifts](#):
>
> yea grommet works good and its cheap too. Stop down where i work . Its like 10 mins from where u live. If you still live with dave. He comes down . Says 10min drive. He’s actually suppose to come down so we can drop a 350 in his rx7.
Yeah, I’ll talk to him and see when he’s going down. He didn’t get the RX7 yet tho. So I might be down b4 him. But my car is gonna be in the shop for a while getting the bodykit put on.
---
### Author:  [@Tuscani\_Chick](https://forums.speedlife.net/u/Tuscani_Chick)
#### Post date: [April 2, 2006, 7:45am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/25 "2006-04-02T07:45:20Z")
> [@The1SloShelby](#):
>
> where did you get them “AEM” intake…?
>
> if its a real AEM intake it should go in between pipes with 2 rubber couplers…
> unless its a fake ebay intake…
>
> my bet is you dont know how to install it and messed it up :dunno:
I didn’t install it and no it’s not an ebay intake. I got it off of AEM. There is nowhere for the MAF sensor to go.
---
### Author:  [@VENOMevo](https://forums.speedlife.net/u/VENOMevo)
#### Post date: [April 2, 2006, 7:46am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/26 "2006-04-02T07:46:34Z")
> [@Tuscani\_Chick](#):
>
> I don’t know how secure i’d feel drilling my $300 intake. It won’t mess up the engine if I do decide to leave it like that will it? The ECU just won’t know how much air is getting through, right?
Well if you don’t want to go do that… call the company and bitch…
maybe a O2 simulator will work in this situation??
---
### Author:  [@Tuscani\_Chick](https://forums.speedlife.net/u/Tuscani_Chick)
#### Post date: [April 2, 2006, 7:48am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/27 "2006-04-02T07:48:47Z")
> [@yamaha](#):
>
> That year Tiburon has a MAF and IAT, she is going to need to cut and drill a hole for both parts or else your car is going to run like shit.
>
> Tuscani\_Chick, if you dont know what your doing, you can seriosuly fuck something up. Assuming your a idiot, which you are, the MAF reads the amount of air coming into the throttle body and adjust the air/fuel ratio for the car. And you also need the IAT for your engine. Splicing in a resistor to the IAT sensor will also throw a CEL. Hyundai ECU’s are extremely finicky.
>
> Seriously, you need to stop what your doing, go to the forum I told you about numerous times in other posts, such at [www.newtiburon.com](http://www.newtiburon.com), and ask there. You going to continue to have a CEL and be a idiot by asking these types of questions without doing any type of viable research.
Well, its not like I knew about this problem before hand, and I wasn’t the one doing the install. I never put an intake in and thats why I got it done by someone else. The reason Im not on NEw tiburon is because it takes up to a day to actually post a thread.
---
### Author:  [@ZEX350Z](https://forums.speedlife.net/u/ZEX350Z)
#### Post date: [April 2, 2006, 7:53am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/28 "2006-04-02T07:53:17Z")
2 Things:
1.) If the MAF doesn’t fit in your intake chances are its not a real AEM intake.
2.)Tell Joe to take the car to a exhaust shop and have them weld in like 2 O2 bungs. Should be no more than $15-20 including labor.
P.S. What kind of car did Joe end up getting anyways?
---
### Author:  [@SinisterCRX](https://forums.speedlife.net/u/SinisterCRX)
#### Post date: [April 2, 2006, 9:53am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/29 "2006-04-02T09:53:59Z")
Take pictures. I could maybe help you out on Monday.
---
### Author:  [@ZEX350Z](https://forums.speedlife.net/u/ZEX350Z)
#### Post date: [April 2, 2006, 10:01am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/30 "2006-04-02T10:01:27Z")
> [@yamaha](#):
>
> Assuming your a idiot, which you are,
very classy of you. :rolleyes:
---
### Author:  [@burnyd](https://forums.speedlife.net/u/burnyd)
#### Post date: [April 2, 2006, 10:06am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/31 "2006-04-02T10:06:45Z")
just like the last 10 people said if it doesnt have a a plug for a MAF Chances are is its a 10 dollar ebay special. Thats not made for your car.
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [April 2, 2006, 10:08am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/32 "2006-04-02T10:08:37Z")
V6 or 4 cylinder tiburon?
and which of these did you buy?
now i know that the v6 and 4cyl intakes are interchangeable but you might have bought the wrong one
this is how it should be installed
understand how the MAF goes now? yes thats on a V6 but the 03/04 v6 intake will fit the 04+ i4s. it is an indentical fit.
---
### Author:  [@1320](https://forums.speedlife.net/u/1320)
#### Post date: [April 2, 2006, 11:16am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/33 "2006-04-02T11:16:56Z")
> [@Tuscani\_Chick](#):
>
> I don’t know how secure i’d feel drilling my $300 intake. It won’t mess up the engine if I do decide to leave it like that will it? The ECU just won’t know how much air is getting through, right?
You’re worried about drilling into your intake, but your MAFS just dangling around in your engine doesn’t concern you the slightest bit?
EDIT: You paid $300 for an intake?!?!?!?! :hsugh:
---
### Author:  [@burnyd](https://forums.speedlife.net/u/burnyd)
#### Post date: [April 2, 2006, 11:21am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/34 "2006-04-02T11:21:22Z")
> [@unicorn](#):
>
> You’re worried about drilling into your intake, but your MAFS just dangling around in your engine doesn’t concern you the slightest bit?
>
> 300 for an intake hahaha! Whats the point?
>
> EDIT: You paid $300 for an intake?!?!?!?! :hsugh:
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [April 2, 2006, 11:53am UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/35 "2006-04-02T11:53:49Z")
> [@Tuscani\_Chick](#):
>
> No, I know its definatly the mass air flow sensor. And there is nowhere for it to go into the intake. My b/f is having the same problem with his car, only It’s his 02 sensor. He is trying to put headers on his car, and he said there’s like 2 sensors or something, and nowhere for them to go. I can’t take it up to Hyundai, cuz they probably will tell me they don’t know how to fix the problem, and I will void my warrenty.
if it goes into the intake it is NOT a MAF. it is IAT sensor most likely. if it was a MAF the car would not even run
---
### Author:  [@DTMVENG24](https://forums.speedlife.net/u/DTMVENG24)
#### Post date: [April 2, 2006, 2:30pm UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/36 "2006-04-02T14:30:49Z")
> [@The1SloShelby](#):
>
> V6 or 4 cylinder tiburon?
>
> and which of these did you buy?
>
> now i know that the v6 and 4cyl intakes are interchangeable but you might have bought the wrong one
>
> this is how it should be installed
>
>
> understand how the MAF goes now? yes thats on a V6 but the 03/04 v6 intake will fit the 04+ i4s. it is an indentical fit.
Its the 4cyl. I’ve never seen someone buy a AEM intake and have to modify it to fit unless its the wrong one or a knockoff. Good luck with getting everything right.
---
### Author:  [@OptikalIllusion](https://forums.speedlife.net/u/OptikalIllusion)
#### Post date: [April 2, 2006, 3:00pm UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/37 "2006-04-02T15:00:05Z")
maybe u bought the 1 that says “non maf”? usually it goes like this w/ AEM throttle body \> first pipe \> rubber coupling \> MAF \> rubber coupling \> Second pipe \> Filter.
im willing to bet u bought the wrong intake, also u got raped for 300.
---
### Author:  [@ZEX350Z](https://forums.speedlife.net/u/ZEX350Z)
#### Post date: [April 2, 2006, 4:35pm UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/38 "2006-04-02T16:35:32Z")
V2 AEM Intakes are $240+. A ripoff at best. Buckle up w/ that 3 HP
---
### Author:  [@1320](https://forums.speedlife.net/u/1320)
#### Post date: [April 2, 2006, 5:25pm UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/39 "2006-04-02T17:25:23Z")
> [@ZEXaccord](#):
>
> V2 AEM Intakes are $240+. A ripoff at best. Buckle up w/ that 3 HP
🤣 +1 for Zexaccord
---
### Author:  [@Tuscani\_Chick](https://forums.speedlife.net/u/Tuscani_Chick)
#### Post date: [April 2, 2006, 6:41pm UTC](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383/40 "2006-04-02T18:41:11Z")
> [@burnyd](#):
>
> just like the last 10 people said if it doesnt have a a plug for a MAF Chances are is its a 10 dollar ebay special. Thats not made for your car.
I got the intake off of Performance center for the last time. Theres no way it is fake. It is straight from them.
[Previous page](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383.md?page=1)
[Next page](https://forums.speedlife.net/t/new-aem-intake-wheres-the-o2-sensor-go/181383.md?page=3)