# New Camaro Spec sheet !! **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [January 11, 2006, 11:14am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693 "2006-01-11T11:14:51Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![99LS1VERT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99ls1vert/32/7317_2.png) [@99LS1VERT](https://forums.speedlife.net/u/99LS1VERT)\ **Post date:** [January 11, 2006, 11:14am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/1 "2006-01-11T11:14:51Z")
[http://www.autoblog.com/2006/01/09/debut-of-the-chevrolet-camaro-concept/](http://www.autoblog.com/2006/01/09/debut-of-the-chevrolet-camaro-concept/) SPECIFICATIONS – CHEVROLET CAMARO CONCEPT Vehicle type: two-door, four-passenger rear-wheel drive sport coupe Wheelbase (in / mm): 110.5 / 2806 Length (in / mm): 186.2 / 4730 Width (in / mm): 79.6 / 2022 Height (in / mm): 53 / 1344 Track (in / mm): 63.8 / 1620 front; 63.3 / 1607 rear Engine: 6.0-L V-8 LS-2, 400 hp / 298 kw, with Active Fuel Management™ Transmission: six-speed manual T56 Suspension: four-wheel independent: MacPherson strut front, multilink rear, progressive rate coil springs, gas-pressurized dampers Brakes: four-wheel disc, 15” rotors with four-piston calipers Wheels: cast aluminum, 21” front, 22” rear Tires: 275/30R21 front, 305/30R22 rear Ill wait for the SS :eekdance: :tup: ---
**Author:** ![jeeves744](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeeves744/32/7619_2.png) [@jeeves744](https://forums.speedlife.net/u/jeeves744)\ **Post date:** [January 11, 2006, 11:20am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/2 "2006-01-11T11:20:53Z")
![http://www.autoblog.com/media/2006/01/Camaro-roll-in-450.jpg](http://www.autoblog.com/media/2006/01/Camaro-roll-in-450.jpg) [http://www.autoblog.com/media/2006/01/Camaro-roll-in-450.jpg](http://www.autoblog.com/media/2006/01/Camaro-roll-in-450.jpg) incase the pic didnt work holy shit it looks mean in that picture ---
**Author:** ![JaysGreenLX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jaysgreenlx/32/7321_2.png) [@JaysGreenLX](https://forums.speedlife.net/u/JaysGreenLX)\ **Post date:** [January 11, 2006, 11:28am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/3 "2006-01-11T11:28:23Z")
I kinda doubt the IRS will make it to production. It would be cool, but not very likely. Same for the 15" brake rotors. ---
**Author:** ![zwarbyt](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zwarbyt/32/7623_2.png) [@zwarbyt](https://forums.speedlife.net/u/zwarbyt)\ **Post date:** [January 11, 2006, 11:32am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/4 "2006-01-11T11:32:03Z")
spec sheet: madd slow madd heavy ---
**Author:** ![MiniSRT4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/minisrt4/32/7225_2.png) [@MiniSRT4](https://forums.speedlife.net/u/MiniSRT4)\ **Post date:** [January 11, 2006, 11:35am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/5 "2006-01-11T11:35:32Z")
> [@JaysGreenLX](#): > > I kinda doubt the IRS will make it to production. It would be cool, but not very likely. > > Same for the 15" brake rotors. you actually think the 21" and 22" rims will make it too? ---
**Author:** ![JaysGreenLX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jaysgreenlx/32/7321_2.png) [@JaysGreenLX](https://forums.speedlife.net/u/JaysGreenLX)\ **Post date:** [January 11, 2006, 11:37am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/6 "2006-01-11T11:37:07Z")
> [@MiniSRT4](#): > > you actually think the 21" and 22" rims will make it too? Whoops missed that. Not a chance. About the only think I think could be there is the engine and tranny. ---
**Author:** ![bladez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bladez/32/7237_2.png) [@bladez](https://forums.speedlife.net/u/bladez)\ **Post date:** [January 11, 2006, 11:40am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/7 "2006-01-11T11:40:04Z")
definately will be a hot car if it ever sees production. as long as they keep the drivetrain in there and not make it extremely heavy then it will be a fun car to cruise with for sure :tup: ---
**Author:** ![MiniSRT4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/minisrt4/32/7225_2.png) [@MiniSRT4](https://forums.speedlife.net/u/MiniSRT4)\ **Post date:** [January 11, 2006, 11:40am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/8 "2006-01-11T11:40:30Z")
its gunna have 13" steelies yo! :lol: ---
**Author:** ![JaysGreenLX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jaysgreenlx/32/7321_2.png) [@JaysGreenLX](https://forums.speedlife.net/u/JaysGreenLX)\ **Post date:** [January 11, 2006, 11:44am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/9 "2006-01-11T11:44:41Z")
> [@MiniSRT4](#): > > its gunna have 13" steelies yo! :lol: They should remake the Rally Wheel. ![http://i11.ebayimg.com/03/i/04/3f/83/33_2.JPG](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/d/4dcb57651a75abfd07fb36c70c6c5108c49bdb34.jpeg) ---
**Author:** ![MaximaSE98](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maximase98/32/7600_2.png) [@MaximaSE98](https://forums.speedlife.net/u/MaximaSE98)\ **Post date:** [January 11, 2006, 11:46am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/10 "2006-01-11T11:46:38Z")
> [@JaysGreenLX](#): > > They should remake the Rally Wheel. > > ![http://i11.ebayimg.com/03/i/04/3f/83/33_2.JPG](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/4/d/4dcb57651a75abfd07fb36c70c6c5108c49bdb34.jpeg) in a 18 or 19 in PIMP ---
**Author:** ![MiniSRT4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/minisrt4/32/7225_2.png) [@MiniSRT4](https://forums.speedlife.net/u/MiniSRT4)\ **Post date:** [January 11, 2006, 11:48am UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/11 "2006-01-11T11:48:01Z")
some kind of new school cragar ss’s like 17" or 18" would be sweet :tup: ---
**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\ **Post date:** [January 11, 2006, 12:03pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/12 "2006-01-11T12:03:45Z")
> [@MiniSRT4](#): > > its gunna have 13" steelies yo! :lol: With 4-wheel drums… ---
**Author:** ![JUICEDSS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/juicedss/32/7185_2.png) [@JUICEDSS](https://forums.speedlife.net/u/JUICEDSS)\ **Post date:** [January 11, 2006, 12:21pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/13 "2006-01-11T12:21:22Z")
> [@zwarbyt](#): > > spec sheet: > > madd slow > madd heavy haha…you too funny… My last Camaro, with a minor adjustment went 12.20 and yah, it was mad heavy… ---
**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\ **Post date:** [January 11, 2006, 5:56pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/14 "2006-01-11T17:56:53Z")
> [@JaysGreenLX](#): > > I kinda doubt the IRS will make it to production. It would be cool, but not very likely. > > Same for the 15" brake rotors. Why is IRS a strech? They already have IRS in the GTO it would make sense to use the same setup… The breaks will probbley be around the same size as a C6 vette…For example C5 vette calipers are the same size as Fbodys the rotors or just slighty bigger they sell kits to off set the caliper so you can use C5 rotors…so im guessing breaks will be C6 size. ---
**Author:** ![93dx\_hatch](https://avatars.discourse-cdn.com/v4/letter/9/90ced4/32.png) [@93dx\_hatch](https://forums.speedlife.net/u/93dx_hatch)\ **Post date:** [January 11, 2006, 6:00pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/15 "2006-01-11T18:00:11Z")
> [@JUICEDSS](#): > > haha…you too funny… My last Camaro, with a minor adjustment went 12.20 and yah, it was mad heavy… :tspry: ---
**Author:** ![BaD\_AZz\_Z\_28](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@BaD\_AZz\_Z\_28](https://forums.speedlife.net/u/BaD_AZz_Z_28)\ **Post date:** [January 11, 2006, 7:46pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/16 "2006-01-11T19:46:03Z")
> [@JaysGreenLX](#): > > I kinda doubt the IRS will make it to production. It would be cool, but not very likely. > . IRS is a done deal, its getting it. ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [January 11, 2006, 7:53pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/17 "2006-01-11T19:53:41Z")
thats so fucking hot ---
**Author:** ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)\ **Post date:** [January 11, 2006, 8:00pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/18 "2006-01-11T20:00:01Z")
I’m like this new direction for GM, hopefully it works out. ---
**Author:** ![nitroinsane](https://avatars.discourse-cdn.com/v4/letter/n/d26b3c/32.png) [@nitroinsane](https://forums.speedlife.net/u/nitroinsane)\ **Post date:** [January 11, 2006, 8:00pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/19 "2006-01-11T20:00:27Z")
[QUOTE=MiniSRT4]you actually think the 21" and 22" rims will make it too?[/QUOTE there really fucking dumb if they do. to much money for tires, same thing with chrysler 300s 18inches=bad idea. those cars r wearing out tires at 5 and 6,000 miles.i really do not like the look of this vehicle and i really hope production vehicle is a million times better. ---
**Author:** ![camarojoe](https://avatars.discourse-cdn.com/v4/letter/c/c67d28/32.png) [@camarojoe](https://forums.speedlife.net/u/camarojoe)\ **Post date:** [January 11, 2006, 8:09pm UTC](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693/20 "2006-01-11T20:09:59Z")
> [@BaD AZz Z/28](#): > > IRS is a done deal, its getting it. They haven’t officially announced that they are even making it yet. You know GM is known to flip flop many times before putting a product out to market. [Next page](https://forums.speedlife.net/t/new-camaro-spec-sheet/6693.md?page=2)