# New numbers and times coming soon. **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [October 5, 2006, 5:53pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430 "2006-10-05T17:53:12Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![cam303](https://avatars.discourse-cdn.com/v4/letter/c/df788c/32.png) [@cam303](https://forums.speedlife.net/u/cam303)\ **Post date:** [October 9, 2006, 5:16pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/21 "2006-10-09T17:16:10Z")
Let me know if the LX,s brake lights are working…4.30’s with a 26 are no problem…you will be under 7000…figure in tire growth. ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [October 9, 2006, 5:22pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/22 "2006-10-09T17:22:17Z")
> [@What's everyone giving up for lent?](https://forums.speedlife.net/t/whats-everyone-giving-up-for-lent/8767/100): > > Let me know if the LX,s brake lights are working…4.30’s with a 26 are no problem…you will be under 7000…figure in tire growth. pretty funny see you saturday at prp? ---
**Author:** ![cam303](https://avatars.discourse-cdn.com/v4/letter/c/df788c/32.png) [@cam303](https://forums.speedlife.net/u/cam303)\ **Post date:** [October 9, 2006, 5:36pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/23 "2006-10-09T17:36:40Z")
Not going to make it saturday. Car still needs a tune and my daughters birthday party is that evening. I took the car out once after getting the heads cut down, they had to replace the valves because of fuel wash. Dont want to run it again till it is tuned to prevent more damage. Just have not had time to do so. ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [October 9, 2006, 5:52pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/24 "2006-10-09T17:52:55Z")
High on sat is going to be 52 degrees. should be good air. ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [October 9, 2006, 6:02pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/25 "2006-10-09T18:02:33Z")
> [@there must be a story behind this...](https://forums.speedlife.net/t/there-must-be-a-story-behind-this/24927/16): > > High on sat is going to be 52 degrees. should be good air. ahh i want to make it, but car is getting tuned tonite and tomorrow and i need a clutch ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [October 10, 2006, 10:23pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/26 "2006-10-10T22:23:31Z")
my car made 424whp@6200rpm’s 386ftlbs@5100rpm’s ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [October 10, 2006, 10:34pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/27 "2006-10-10T22:34:38Z")
^^^ nice and good luck saturday ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 11, 2006, 3:41am UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/28 "2006-10-11T03:41:47Z")
> [@there must be a story behind this...](https://forums.speedlife.net/t/there-must-be-a-story-behind-this/24927/16): > > High on sat is going to be 52 degrees. should be good air. thats what i noticed :blue: ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 11, 2006, 4:08am UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/29 "2006-10-11T04:08:53Z")
> [@how to take a shower](https://forums.speedlife.net/t/how-to-take-a-shower/24945/8): > > my car made 424whp@6200rpm’s > 386ftlbs@5100rpm’s nice congrats! ---
**Author:** ![amwellls1](https://avatars.discourse-cdn.com/v4/letter/a/35a633/32.png) [@amwellls1](https://forums.speedlife.net/u/amwellls1)\ **Post date:** [October 11, 2006, 9:21am UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/30 "2006-10-11T09:21:58Z")
Congrats, hopefully the weather will hold for Saturday. ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [October 11, 2006, 9:35am UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/31 "2006-10-11T09:35:56Z")
thanks guy’s the tuner felt that I would have made 15-18hp more but i lost it through the 12 bolt and 4.30’s which wold have put in the 440hp range. I was real lean wot on baseline 13.9 which is a little scary. Now I am 13.1 across the board at wot. I’m also happy that i picked up as much as 34ftlbs across the rpm range. I think the reverse split cam is hurting me up top but I’m happy with the torque. Track #'s coming soon. ---
**Author:** ![nitrousjunkie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nitrousjunkie/32/6030_2.png) [@nitrousjunkie](https://forums.speedlife.net/u/nitrousjunkie)\ **Post date:** [October 12, 2006, 4:30pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/32 "2006-10-12T16:30:44Z")
if you need some more horsepower i can probably lend you some ---
**Author:** ![cam303](https://avatars.discourse-cdn.com/v4/letter/c/df788c/32.png) [@cam303](https://forums.speedlife.net/u/cam303)\ **Post date:** [October 12, 2006, 4:43pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/33 "2006-10-12T16:43:05Z")
My mph guess is no more than 122 mph at prp given your weight and horsepower. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 12, 2006, 6:05pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/34 "2006-10-12T18:05:04Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/2999): > > My mph guess is no more than 122 mph at prp given your weight and horsepower. his MPH will tell him his HP! ---
**Author:** ![amwellls1](https://avatars.discourse-cdn.com/v4/letter/a/35a633/32.png) [@amwellls1](https://forums.speedlife.net/u/amwellls1)\ **Post date:** [October 12, 2006, 6:57pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/35 "2006-10-12T18:57:43Z")
> [@diagram of "who owns who" in the automotive world](https://forums.speedlife.net/t/diagram-of-who-owns-who-in-the-automotive-world/25032/18): > > his MPH will tell him his HP! But he knows his HP so shouldn’t that tell him his MPH?:bowrofl: ---
**Author:** ![NOTLUZN](https://avatars.discourse-cdn.com/v4/letter/n/da6949/32.png) [@NOTLUZN](https://forums.speedlife.net/u/NOTLUZN)\ **Post date:** [October 12, 2006, 7:29pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/36 "2006-10-12T19:29:33Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/2999): > > My mph guess is no more than 122 mph at prp given your weight and horsepower. i think your right. my car and me need to be on a diet. probably a cam swap over winter. we’ll see how it runs on Sat. ---
**Author:** ![slvrhwk](https://avatars.discourse-cdn.com/v4/letter/s/f0a364/32.png) [@slvrhwk](https://forums.speedlife.net/u/slvrhwk)\ **Post date:** [October 13, 2006, 7:55am UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/37 "2006-10-13T07:55:04Z")
Can’t wait to see those #'s good luck. I’ll prob be tearing back into mine this winter. 1qt. of oil every 200 miles is not good. ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [October 13, 2006, 12:25pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/38 "2006-10-13T12:25:17Z")
> [@You guys make this call.......](https://forums.speedlife.net/t/you-guys-make-this-call/25049/18): > > Can’t wait to see those #'s good luck. > > I’ll prob be tearing back into mine this winter. 1qt. of oil every 200 miles is not good. ahh the ever great oil consumpiton problem with ls1’s…im deleting my PCV system ---
**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\ **Post date:** [October 13, 2006, 12:27pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/39 "2006-10-13T12:27:08Z")
dont u need the pcv to get rid of harmful fumes inside the block? ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 13, 2006, 1:14pm UTC](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430/40 "2006-10-13T13:14:17Z")
> [@OFFICIAL Buffalo Sabres Thread](https://forums.speedlife.net/t/official-buffalo-sabres-thread/25170/3035): > > dont u need the pcv to get rid of harmful fumes inside the block? yes and no, you can do what others do and use breathers. thats what im using [Previous page](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430.md?page=1) [Next page](https://forums.speedlife.net/t/new-numbers-and-times-coming-soon/185430.md?page=3)