# New part for my car - Bling inside
**URL:** https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072
**Category:** NYSpeed Automotive
**Created:** [November 28, 2005, 5:07pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072 "2005-11-28T17:07:43Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [November 28, 2005, 5:07pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/1 "2005-11-28T17:07:43Z")
There is a guy on the nat board… making the t-case out of billet… cause 500+ AWHP/TQ breaks them immediately.
Should be about 1k-1200 bucks shipped. Anyone here think they could do something similar? Maybe not the t-case, but other parts that break… but are usually replaced with stock… then replaced again.
Stock is 3lbs, this one is 9… and 12 lbs were removed from the block of aluminum.
---
### Author:  [@Choda](https://forums.speedlife.net/u/Choda)
#### Post date: [November 28, 2005, 5:18pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/2 "2005-11-28T17:18:11Z")
OMG DONT WASTE UR MONEY
---
### Author:  [@SilverGTP](https://forums.speedlife.net/u/SilverGTP)
#### Post date: [November 28, 2005, 5:19pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/3 "2005-11-28T17:19:24Z")
my dad
🙂
---
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [November 28, 2005, 5:20pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/4 "2005-11-28T17:20:48Z")
ur dad wouldn’t attempt it.
unless he would… you’d have to ask him.
---
### Author:  [@Choda](https://forums.speedlife.net/u/Choda)
#### Post date: [November 28, 2005, 5:20pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/5 "2005-11-28T17:20:56Z")
> [@SilverGTP](#):
>
> my dad
>
> 🙂
ohh word… get the specs.
ahhh i forgot, but it wont happen, jack will throw away over a g into this for shits and giggles.
---
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [November 28, 2005, 5:22pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/6 "2005-11-28T17:22:58Z")
nah, i don’t need it yet.
---
### Author:  [@SilverGTP](https://forums.speedlife.net/u/SilverGTP)
#### Post date: [November 28, 2005, 5:23pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/7 "2005-11-28T17:23:13Z")
> [@Jack](#):
>
> ur dad wouldn’t attempt it.
>
> unless he would… you’d have to ask him.
just did
its forged casting… need to sell 50-100 to make profit probably
---
### Author:  [@Choda](https://forums.speedlife.net/u/Choda)
#### Post date: [November 28, 2005, 5:24pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/8 "2005-11-28T17:24:07Z")
> [@SilverGTP](#):
>
> just did
>
> its forged casting… need to sell 50-100 to make profit probably
please he loves jack more than u…🤣
---
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [November 28, 2005, 5:29pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/9 "2005-11-28T17:29:43Z")
ummm its not cast…
what is forged casting?
took 200 hours to program, 8 hours to cut.
7570 or something aluminum.
---
### Author:  [@RacerX](https://forums.speedlife.net/u/RacerX)
#### Post date: [November 28, 2005, 5:36pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/10 "2005-11-28T17:36:01Z")
Nice piece is that thing in progress to be ready to ship out? Is That the same one from 3si? A watched a couple videos of the design process on that one. Definitely cool shit.
---
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [November 28, 2005, 5:54pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/11 "2005-11-28T17:54:33Z")
thats the one… Ray Pampena (800+ AWHP) is going to be the tester. he breaks a lot of TCs… if this holds, it will be worth its weight in gold, and ray will be deep in the 9s
---
### Author:  [@Rx3](https://forums.speedlife.net/u/Rx3)
#### Post date: [November 28, 2005, 7:13pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/12 "2005-11-28T19:13:22Z")
Wow. Keep us posted.
---
### Author:  [@Fry](https://forums.speedlife.net/u/Fry)
#### Post date: [November 28, 2005, 7:36pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/13 "2005-11-28T19:36:57Z")
> [@SilverGTP](#):
>
> its forged casting… need to sell 50-100 to make profit probably
Uh, wanna explain? It certainly looks machined from a single block to me. You can even see the cutting marks. Plus forging and casting are 2 different things as far as I know, and I don’t see how one could forge something hollow like that either. Not saying that you’re wrong, it’s just that as far as my knowledge goes you are. I must be missing something?
---
### Author:  [@STEALTTH](https://forums.speedlife.net/u/STEALTTH)
#### Post date: [November 28, 2005, 7:37pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/14 "2005-11-28T19:37:14Z")
> [@Rx3](#):
>
> Wow. Keep us posted.
:word: to what rick said
maybe i’ll build another stealTTh 🙂
---
### Author:  [@Nikuk](https://forums.speedlife.net/u/Nikuk)
#### Post date: [November 29, 2005, 6:17am UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/15 "2005-11-29T06:17:15Z")
uhh what happened to selling this thing & buying a house?
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [November 29, 2005, 6:41am UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/16 "2005-11-29T06:41:57Z")
what the fuck is a forged casting? LOL.
do you mean sintered?
---
### Author:  [@Fry](https://forums.speedlife.net/u/Fry)
#### Post date: [November 29, 2005, 10:11am UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/17 "2005-11-29T10:11:11Z")
Maybe he’s thinking of a shot-peened casting, which that case still is not…
---
### Author:  [@Jack](https://forums.speedlife.net/u/Jack)
#### Post date: [November 29, 2005, 1:08pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/18 "2005-11-29T13:08:52Z")
this was CNC’d from a single block of aluminum. a couple guys have kicked around the idea of casting… but if that route was chosen, you’d have to sell a bunch of them to turn profit cause of the hours involved. also with casting… you still have to clean it up… which takes man hours on every piece.
I’ll keep you posted… opefully the internals can hold up to the abuse… we think it was fatigue on the case that lead to stripped grears… this hunk of hottness should solve the mystery.
---
### Author:  [@RuBiCaNT](https://forums.speedlife.net/u/RuBiCaNT)
#### Post date: [November 29, 2005, 1:37pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/19 "2005-11-29T13:37:33Z")
I am very surprised that this is the approach they are going towards. I would think they would have gone more towards the way Shep has improved the DSM TC, extending the splines down the output shaft as well as a revamped driveshaft.
---
### Author:  [@Rx3](https://forums.speedlife.net/u/Rx3)
#### Post date: [November 29, 2005, 2:12pm UTC](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072/20 "2005-11-29T14:12:52Z")
> [@RuBiCaNT](#):
>
> I am very surprised that this is the approach they are going towards. I would think they would have gone more towards the way Shep has improved the DSM TC, extending the splines down the output shaft as well as a revamped driveshaft.
Me too. I’m curious to see what will happen.
[Next page](https://forums.speedlife.net/t/new-part-for-my-car-bling-inside/5072.md?page=2)