# new parts.

**URL:** <https://forums.speedlife.net/t/new-parts/123337>\
**Category:** SON240sx Automotive\
**Created:** [April 7, 2009, 9:47pm UTC](https://forums.speedlife.net/t/new-parts/123337 "2009-04-07T21:47:46Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![240sx\_nismo](https://avatars.discourse-cdn.com/v4/letter/2/3da27b/32.png) [@240sx\_nismo](https://forums.speedlife.net/u/240sx_nismo)\
**Post date:** [April 7, 2009, 9:47pm UTC](https://forums.speedlife.net/t/new-parts/123337/1 "2009-04-07T21:47:46Z")

</div>

ok guys so i just got off the phone with phase 2 motortrend and ordered all  
these parts. i want to know your opinion on how much different the car will be  
1995 240sx le vlsd.

1. Unorthodox racing aluminum crank pulley. -Genuine [performance.com](http://performance.com) $189.99
2. Act street/strip clutch kit. -Phase 2 [motortrend.com](http://motortrend.com) $375
3. fidanza lightweight aluminum flywheel. - phase 2 motor trend $345  
4.nismo solid short shifter. Phase 2 motor trend - $219.95  
5.nismo clutch slave cylinder. phase 2 motor trend - $169  
6.nismo clutch fork pivot. $39  
7.dss aluminum one piece drive shaft. $429  
8.AGP throttle body pulley. $74  
9.energy suspension rack and pinion bushing set $11.50  
10.energy suspension tie rod dust boot. $5.00  
11.peak performance urethane sub frame bushing $89.00  
12.hks shift spring kit. $ 97.75  
13.peak performance transmission bushing street version with nismo mount $215.00  
14.redline transmission gear oil 3 bottles light weight 2 bottles heavy duty. $62.00
4. Nismo steel braided clutch line kit $89.95
5. Nismo white shift knob. $45  
17 in gen cold air intake  
pdm stage 2 cams.  
jwt ecu chip.  
apexi dual n1  
megan racing stainless header and cat delete down pipe.  
catco high flow cat.

body.

1. 97-98 side skirts.  
$650
2. S14 zenki silvia grill. $107.  
3.s14 zenki glass euro spec headlights. $450  
4.nismo black license plate frame black. $26  
5.falken hanabi bronze with falken azenis 235 40 17 all around

let me know what you think…

---

<div class="post-metadata">

**Author:** ![240sx\_nismo](https://avatars.discourse-cdn.com/v4/letter/2/3da27b/32.png) [@240sx\_nismo](https://forums.speedlife.net/u/240sx_nismo)\
**Post date:** [April 7, 2009, 9:50pm UTC](https://forums.speedlife.net/t/new-parts/123337/2 "2009-04-07T21:50:24Z")

</div>

not all parts came from phase 2

---

<div class="post-metadata">

**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\
**Post date:** [April 7, 2009, 10:27pm UTC](https://forums.speedlife.net/t/new-parts/123337/3 "2009-04-07T22:27:33Z")

</div>

It will feel far less sloppy, but it now be loud and slow.

---

<div class="post-metadata">

**Author:** ![AhmadG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ahmadg/32/5577_2.png) [@AhmadG](https://forums.speedlife.net/u/AhmadG)\
**Post date:** [April 7, 2009, 10:52pm UTC](https://forums.speedlife.net/t/new-parts/123337/4 "2009-04-07T22:52:10Z")

</div>

That looks like my shopping cart on [frsport.com](http://frsport.com) before I close firefox and cry. lol

Looks like you’re going all out with Nismo parts. I didn’t see the subframe brace on there, it’s a very effective initial suspension modification. While you’re at it you might as well buy the TC rods off of Bing, and install them together, it’ll make a noticeable difference.

---

<div class="post-metadata">

**Author:** ![240sx\_nismo](https://avatars.discourse-cdn.com/v4/letter/2/3da27b/32.png) [@240sx\_nismo](https://forums.speedlife.net/u/240sx_nismo)\
**Post date:** [April 7, 2009, 11:09pm UTC](https://forums.speedlife.net/t/new-parts/123337/5 "2009-04-07T23:09:43Z")

</div>

> [@i had an accident, I'M NOT TRYING TO SUE DENNY'S \*PICS\*](https://forums.speedlife.net/t/i-had-an-accident-im-not-trying-to-sue-dennys-pics/21325/58):
>
> It will feel far less sloppy, but it now be loud and slow.

how could it slower then stock after all this i should have 180 whp its been proven. you dont have to go turbo for some nice power all tho i do plan on going kat down the road.

---

<div class="post-metadata">

**Author:** ![240sx\_nismo](https://avatars.discourse-cdn.com/v4/letter/2/3da27b/32.png) [@240sx\_nismo](https://forums.speedlife.net/u/240sx_nismo)\
**Post date:** [April 7, 2009, 11:11pm UTC](https://forums.speedlife.net/t/new-parts/123337/6 "2009-04-07T23:11:52Z")

</div>

> [@Setting up for Time Attacks/Auto X](https://forums.speedlife.net/t/setting-up-for-time-attacks-auto-x/21336/4):
>
> That looks like my shopping cart on [frsport.com](http://frsport.com) before I close firefox and cry. lol
> 
> Looks like you’re going all out with Nismo parts. I didn’t see the subframe brace on there, it’s a very effective initial suspension modification. While you’re at it you might as well buy the TC rods off of Bing, and install them together, it’ll make a noticeable difference.

yea i forgot to add that but im going crazy on suspension on my next big buy.  
also nismo r tune strut bars will be good.

---

<div class="post-metadata">

**Author:** ![sidewayz240](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)\
**Post date:** [April 8, 2009, 7:52am UTC](https://forums.speedlife.net/t/new-parts/123337/7 "2009-04-08T07:52:51Z")

</div>

Jesus… Got some money to blow eh?? lol

It will rev up like stink. your probably reducing your rotational mass by like 50%. Clutch, tranny and shifter should feel tight and direct. 180 wheel should be very achievable.

---

<div class="post-metadata">

**Author:** ![240sx\_nismo](https://avatars.discourse-cdn.com/v4/letter/2/3da27b/32.png) [@240sx\_nismo](https://forums.speedlife.net/u/240sx_nismo)\
**Post date:** [April 8, 2009, 7:58am UTC](https://forums.speedlife.net/t/new-parts/123337/8 "2009-04-08T07:58:55Z")

</div>

> [@Need help with a getting a Phone #$100 paid](https://forums.speedlife.net/t/need-help-with-a-getting-a-phone-100-paid/21337/5):
>
> Jesus… Got some money to blow eh?? lol
> 
> It will rev up like stink. your probably reducing your rotational mass by like 50%. Clutch, tranny and shifter should feel tight and direct. 180 wheel should be very achievable.

sounds good cant wait for ups to get here going to be having some fun for once.

---

<div class="post-metadata">

**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\
**Post date:** [April 8, 2009, 4:19pm UTC](https://forums.speedlife.net/t/new-parts/123337/9 "2009-04-08T16:19:38Z")

</div>

You wont get 180whp from this… considering you have like 110 or so now, you wont gain 70whp from that.

---

<div class="post-metadata">

**Author:** ![Silvia\_Drift](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/silvia_drift/32/5271_2.png) [@Silvia\_Drift](https://forums.speedlife.net/u/Silvia_Drift)\
**Post date:** [April 8, 2009, 6:12pm UTC](https://forums.speedlife.net/t/new-parts/123337/10 "2009-04-08T18:12:38Z")

</div>

> [@James Kim, lost Father in Oregon, found](https://forums.speedlife.net/t/james-kim-lost-father-in-oregon-found/21262/15):
>
> You wont get 180whp from this… considering you have like 110 or so now, you wont gain 70whp from that.

What r u talking about. It will be close to 180whp on a dynojet dyno.

---

<div class="post-metadata">

**Author:** ![RED\_LINE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/red_line/32/5656_2.png) [@RED\_LINE](https://forums.speedlife.net/u/RED_LINE)\
**Post date:** [April 8, 2009, 7:16pm UTC](https://forums.speedlife.net/t/new-parts/123337/11 "2009-04-08T19:16:46Z")

</div>

best bet, take it to the dyno and see what happens.

let us know the results! 🙂

---

<div class="post-metadata">

**Author:** ![240sx\_nismo](https://avatars.discourse-cdn.com/v4/letter/2/3da27b/32.png) [@240sx\_nismo](https://forums.speedlife.net/u/240sx_nismo)\
**Post date:** [April 8, 2009, 8:20pm UTC](https://forums.speedlife.net/t/new-parts/123337/12 "2009-04-08T20:20:25Z")

</div>

> [@James Kim, lost Father in Oregon, found](https://forums.speedlife.net/t/james-kim-lost-father-in-oregon-found/21262/15):
>
> You wont get 180whp from this… considering you have like 110 or so now, you wont gain 70whp from that.

1995 240sx comes stock with 130 whp not 110 and 155 bhp if it was 110 it would be slower then a toyota tercel

---

<div class="post-metadata">

**Author:** ![DA\_1](https://avatars.discourse-cdn.com/v4/letter/d/ba8739/32.png) [@DA\_1](https://forums.speedlife.net/u/DA_1)\
**Post date:** [April 8, 2009, 11:11pm UTC](https://forums.speedlife.net/t/new-parts/123337/13 "2009-04-08T23:11:48Z")

</div>

I only see 2 things in that list that will/should make a noticeable difference bud,thats the STAGE 2 cams and the jwt tuned ecu,the lightened stuff and will help a tiny bit with acceleration but not much power,the rest is just maintainance and better looks.

post up a dyno sheet when its all said and done…

---

<div class="post-metadata">

**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\
**Post date:** [April 8, 2009, 11:17pm UTC](https://forums.speedlife.net/t/new-parts/123337/14 "2009-04-08T23:17:50Z")

</div>

You will have 110 hp or so to the wheels, maybe 120 on a stock KA. Your car will be slow. Swap an SR20 into it.

---

<div class="post-metadata">

**Author:** ![white240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/white240/32/5651_2.png) [@white240](https://forums.speedlife.net/u/white240)\
**Post date:** [April 9, 2009, 3:42am UTC](https://forums.speedlife.net/t/new-parts/123337/15 "2009-04-09T03:42:15Z")

</div>

Dave… you’re retarded.

anyone with 240sx\_nismo as a name, is obviously going to run a heavy car game.

No way a noob would be clever enough to come up with a sick name like that.

---

<div class="post-metadata">

**Author:** ![NewfoundlandDude](https://avatars.discourse-cdn.com/v4/letter/n/9fc348/32.png) [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)\
**Post date:** [April 9, 2009, 5:18am UTC](https://forums.speedlife.net/t/new-parts/123337/16 "2009-04-09T05:18:25Z")

</div>

^^ haha

---

<div class="post-metadata">

**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\
**Post date:** [April 9, 2009, 5:34am UTC](https://forums.speedlife.net/t/new-parts/123337/17 "2009-04-09T05:34:51Z")

</div>

what i dont get is… why would u list all the pricing?

gl on the build

---

<div class="post-metadata">

**Author:** ![NewfoundlandDude](https://avatars.discourse-cdn.com/v4/letter/n/9fc348/32.png) [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)\
**Post date:** [April 9, 2009, 5:42am UTC](https://forums.speedlife.net/t/new-parts/123337/18 "2009-04-09T05:42:13Z")

</div>

Because, how else would we know his car is serious…:lol:

---

<div class="post-metadata">

**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\
**Post date:** [April 9, 2009, 6:08am UTC](https://forums.speedlife.net/t/new-parts/123337/19 "2009-04-09T06:08:31Z")

</div>

i have an account with P2M and could have saved you several hundred on that buy…

---

<div class="post-metadata">

**Author:** ![240sx\_nismo](https://avatars.discourse-cdn.com/v4/letter/2/3da27b/32.png) [@240sx\_nismo](https://forums.speedlife.net/u/240sx_nismo)\
**Post date:** [April 9, 2009, 11:40am UTC](https://forums.speedlife.net/t/new-parts/123337/20 "2009-04-09T11:40:10Z")

</div>

> [@Does .999999 = 1 vPOLL](https://forums.speedlife.net/t/does-999999-1-vpoll/13546/136):
>
> i have an account with P2M and could have saved you several hundred on that buy…

man if i only new that before. well in the future how would i go about doing that just let you know first? i do plan on getting i lot more from phase 2

[Next page](https://forums.speedlife.net/t/new-parts/123337.md?page=2)
