# New Toy **URL:** \ **Category:** Builds\ **Created:** [July 22, 2009, 10:37pm UTC](https://forums.speedlife.net/t/new-toy/203251 "2009-07-22T22:37:53Z")\ **Posts on this page:** 20\ **Page:** 10
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [November 6, 2009, 3:29pm UTC](https://forums.speedlife.net/t/new-toy/203251/181 "2009-11-06T15:29:01Z")
I’ll keep my SPEC experience to myself. Good luck. ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [November 6, 2009, 3:35pm UTC](https://forums.speedlife.net/t/new-toy/203251/182 "2009-11-06T15:35:35Z")
i HATE my spec ---
**Author:** ![ZXGTO06](https://avatars.discourse-cdn.com/v4/letter/z/e47c2d/32.png) [@ZXGTO06](https://forums.speedlife.net/u/ZXGTO06)\ **Post date:** [November 7, 2009, 12:16am UTC](https://forums.speedlife.net/t/new-toy/203251/183 "2009-11-07T00:16:49Z")
I was also looking at a spec clutch for my gto. Both vengeance racing and speed Inc talked me out of it. They both said quality went to shit and they have had no luck with them. I went with the RPS twin. ---
**Author:** ![SK360](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sk360/32/5933_2.png) [@SK360](https://forums.speedlife.net/u/SK360)\ **Post date:** [November 8, 2009, 7:50pm UTC](https://forums.speedlife.net/t/new-toy/203251/184 "2009-11-08T19:50:52Z")
Clutch held at MIR this weekend… A little too good. 😃 ---
**Author:** ![Wayne9125](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne9125/32/6045_2.png) [@Wayne9125](https://forums.speedlife.net/u/Wayne9125)\ **Post date:** [November 8, 2009, 10:34pm UTC](https://forums.speedlife.net/t/new-toy/203251/185 "2009-11-08T22:34:33Z")
just dropped the camaro at the house thanks fran =) ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [November 8, 2009, 10:44pm UTC](https://forums.speedlife.net/t/new-toy/203251/186 "2009-11-08T22:44:31Z")
thank you buddy. and yes the clutch held just fine. Grabbed HARD lololol. ---
**Author:** ![Wayne9125](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne9125/32/6045_2.png) [@Wayne9125](https://forums.speedlife.net/u/Wayne9125)\ **Post date:** [November 8, 2009, 10:49pm UTC](https://forums.speedlife.net/t/new-toy/203251/187 "2009-11-08T22:49:53Z")
just like my hawk pads son ---
**Author:** ![tjZ28](https://avatars.discourse-cdn.com/v4/letter/t/9de0a6/32.png) [@tjZ28](https://forums.speedlife.net/u/tjZ28)\ **Post date:** [November 10, 2009, 6:37am UTC](https://forums.speedlife.net/t/new-toy/203251/188 "2009-11-10T06:37:50Z")
> [@Motor Building](https://forums.speedlife.net/t/motor-building/41484/15): > > ACT’s alway been a staple in the import world, dunno how they do for domestics My builder has the ACT twin (forget the exact disc pairing since they offer a lot of options) in his 875 RWHP corrected (it was doing a c-hair over 900 uncorrected, which is what the clutch is actually dealing with) C6Z. He also has a customer he built a LSX 454 w/ a YSi that is well over 900 on the ACT. Anyway, FWIW I haven’t heard the horror stories from the SPEC Twin that the singles have. So what broke? Sorry to hear something let go… good luck getting it fixed! -TJ ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [November 10, 2009, 6:42am UTC](https://forums.speedlife.net/t/new-toy/203251/189 "2009-11-10T06:42:23Z")
We need some pics!! ---
**Author:** ![spoolinsteve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spoolinsteve/32/6026_2.png) [@spoolinsteve](https://forums.speedlife.net/u/spoolinsteve)\ **Post date:** [November 10, 2009, 7:22am UTC](https://forums.speedlife.net/t/new-toy/203251/190 "2009-11-10T07:22:40Z")
Im assuming the output shaft/tailshaft/whatever you want to call it broke, But I guess fran will confirm or deny ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [November 10, 2009, 4:43pm UTC](https://forums.speedlife.net/t/new-toy/203251/191 "2009-11-10T16:43:20Z")
confirm that lol. ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [December 13, 2009, 10:30am UTC](https://forums.speedlife.net/t/new-toy/203251/192 "2009-12-13T10:30:57Z")
still waiting on parts to come available for the damn transmission. if i had a mustang the parts would already be on the damn car… ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [December 13, 2009, 1:22pm UTC](https://forums.speedlife.net/t/new-toy/203251/193 "2009-12-13T13:22:02Z")
so when are the twins going on ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [December 16, 2009, 5:28pm UTC](https://forums.speedlife.net/t/new-toy/203251/194 "2009-12-16T17:28:51Z")
lol if i go that route…motor work should begin soon. staying stock displacement…and using boost to make up for not going bigger. ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [February 27, 2010, 11:56am UTC](https://forums.speedlife.net/t/new-toy/203251/195 "2010-02-27T11:56:22Z")
hmm well the trans will be leaving next week for rpm trans to get a full rebuild done. Also we will be dropping in a medium compression 418 ls3 from texas speed. Then a fuel cell with a full host of magnafuel parts along with much larger injectors… Still need to look into exactly how big of injector i can go while keeping the car streetable. Then a custom setup for boost that will still utilize the tvs2300 but I will actually be pulleying up on the s/c to create less boost… ---
**Author:** ![Wayne9125](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne9125/32/6045_2.png) [@Wayne9125](https://forums.speedlife.net/u/Wayne9125)\ **Post date:** [February 27, 2010, 12:01pm UTC](https://forums.speedlife.net/t/new-toy/203251/196 "2010-02-27T12:01:57Z")
boo no more garage ornament jokes =( ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [February 27, 2010, 6:12pm UTC](https://forums.speedlife.net/t/new-toy/203251/197 "2010-02-27T18:12:27Z")
> [@X-box live gamertag thread\*\*edited with list\*\*](https://forums.speedlife.net/t/x-box-live-gamertag-thread-edited-with-list/22265/1208): > > hmm well the trans will be leaving next week for rpm trans to get a full rebuild done. Also we will be dropping in a medium compression 418 ls3 from texas speed. Then a fuel cell with a full host of magnafuel parts along with much larger injectors… Still need to look into exactly how big of injector i can go while keeping the car streetable. Then a custom setup for boost that will still utilize the tvs2300 but I will actually be pulleying up on the s/c to create less boost… svo 80s are plenty for ya. they are 92lb injectors at LS base fuel pressure. Thats plenty of injector and dont require a resistor box. They idle fine with the correct tables for the injectors. good luck with the build!!! ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [February 27, 2010, 7:20pm UTC](https://forums.speedlife.net/t/new-toy/203251/198 "2010-02-27T19:20:25Z")
damn that sounds sick fran. been wondering what the status was on your car. good luck! ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [February 28, 2010, 8:58am UTC](https://forums.speedlife.net/t/new-toy/203251/199 "2010-02-28T08:58:12Z")
> [@Who tunes 5.0L Mustangs around here](https://forums.speedlife.net/t/who-tunes-5-0l-mustangs-around-here/41952/42): > > svo 80s are plenty for ya. they are 92lb injectors at LS base fuel pressure. Thats plenty of injector and dont require a resistor box. They idle fine with the correct tables for the injectors. good luck with the build!!! I’m actually not to sure of that…what is the peak hp that 92lb injectors usually deal with? And thanks. I may end up asking you for some help. ---
**Author:** ![BoostedYards86](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boostedyards86/32/6048_2.png) [@BoostedYards86](https://forums.speedlife.net/u/BoostedYards86)\ **Post date:** [February 28, 2010, 8:59am UTC](https://forums.speedlife.net/t/new-toy/203251/200 "2010-02-28T08:59:59Z")
> [@Do you like the new classified section?](https://forums.speedlife.net/t/do-you-like-the-new-classified-section/42028/28): > > damn that sounds sick fran. been wondering what the status was on your car. good luck! thanks jeff. its gonna be a pretty unique build for an ls…especially for a new maro. [Previous page](https://forums.speedlife.net/t/new-toy/203251.md?page=9) [Next page](https://forums.speedlife.net/t/new-toy/203251.md?page=11)