# new wheels

**URL:** https://forums.speedlife.net/t/new-wheels/225806
**Category:** NYSpeed Automotive
**Created:** [September 7, 2012, 7:11pm UTC](https://forums.speedlife.net/t/new-wheels/225806 "2012-09-07T19:11:04Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [September 7, 2012, 7:11pm UTC](https://forums.speedlife.net/t/new-wheels/225806/1 "2012-09-07T19:11:04Z")

</div>

15x10-25

mounted the Mickey’s and broke the driveshaft off the car going 1-2@ 4000 rpm 😃  
[ATTACH=CONFIG]21932[/ATTACH]

---

<div class="post-metadata">

### Author: ![Axis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/axis/32/5149_2.png) [@Axis](https://forums.speedlife.net/u/Axis)
#### Post date: [September 7, 2012, 7:31pm UTC](https://forums.speedlife.net/t/new-wheels/225806/2 "2012-09-07T19:31:24Z")

</div>

I know what a diamond racing wheel looks like, lets see some pics of them with the car. As much as I don’t care for diamond wheels, 14/15in diameter negative offset wheels usually look awesome on 240/280z’s, definitely an improvement over those rotas you had. Looks like you might need some longer studs though.

---

<div class="post-metadata">

### Author: ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [September 7, 2012, 7:37pm UTC](https://forums.speedlife.net/t/new-wheels/225806/3 "2012-09-07T19:37:24Z")

</div>

those were placed just to show size / dish ill get some pics with them on the car tomorrow in the sunlight

---

<div class="post-metadata">

### Author: ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)
#### Post date: [September 7, 2012, 7:41pm UTC](https://forums.speedlife.net/t/new-wheels/225806/4 "2012-09-07T19:41:02Z")

</div>

15x10 all around? In for pics as well! Bet they sit nice on your Z

---

<div class="post-metadata">

### Author: ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [September 7, 2012, 8:01pm UTC](https://forums.speedlife.net/t/new-wheels/225806/5 "2012-09-07T20:01:06Z")

</div>

15x10-25 with 275/50/15 m/t et street radials

fronts are 16x8-12 with 205/55/16s

[ATTACH=CONFIG]21933[/ATTACH]

---

<div class="post-metadata">

### Author: ![Motocrossx23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/motocrossx23/32/5120_2.png) [@Motocrossx23](https://forums.speedlife.net/u/Motocrossx23)
#### Post date: [September 8, 2012, 12:01am UTC](https://forums.speedlife.net/t/new-wheels/225806/6 "2012-09-08T00:01:31Z")

</div>

Not a fan at all

---

<div class="post-metadata">

### Author: ![sasquatch](https://avatars.discourse-cdn.com/v4/letter/s/e79b87/32.png) [@sasquatch](https://forums.speedlife.net/u/sasquatch)
#### Post date: [September 8, 2012, 3:54am UTC](https://forums.speedlife.net/t/new-wheels/225806/7 "2012-09-08T03:54:54Z")

</div>

I still got those fender flares if you wannabuy them 🙂

---

<div class="post-metadata">

### Author: ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)
#### Post date: [September 8, 2012, 4:57am UTC](https://forums.speedlife.net/t/new-wheels/225806/8 "2012-09-08T04:57:49Z")

</div>

I was with you til the purple.

---

<div class="post-metadata">

### Author: ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)
#### Post date: [September 8, 2012, 6:31am UTC](https://forums.speedlife.net/t/new-wheels/225806/9 "2012-09-08T06:31:33Z")

</div>

> [@Motocrossx23](#):
>
> Not a fan at all

+1

---

<div class="post-metadata">

### Author: ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)
#### Post date: [September 8, 2012, 6:34am UTC](https://forums.speedlife.net/t/new-wheels/225806/10 "2012-09-08T06:34:30Z")

</div>

I like them :tup:

---

<div class="post-metadata">

### Author: ![Minglor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/minglor/32/7373_2.png) [@Minglor](https://forums.speedlife.net/u/Minglor)
#### Post date: [September 8, 2012, 6:53am UTC](https://forums.speedlife.net/t/new-wheels/225806/11 "2012-09-08T06:53:15Z")

</div>

No.

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 8, 2012, 7:34am UTC](https://forums.speedlife.net/t/new-wheels/225806/12 "2012-09-08T07:34:04Z")

</div>

I’ve seen worse things out there, but they just don’t seem to be sitting right.

---

<div class="post-metadata">

### Author: ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)
#### Post date: [September 8, 2012, 7:40am UTC](https://forums.speedlife.net/t/new-wheels/225806/13 "2012-09-08T07:40:03Z")

</div>

whats with the rear axle alignment? the tire is nearly touching the front side of the wheelwell but like 4 inches away from the rear

---

<div class="post-metadata">

### Author: ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [September 8, 2012, 7:53am UTC](https://forums.speedlife.net/t/new-wheels/225806/14 "2012-09-08T07:53:38Z")

</div>

no sunlight so I can’t really get a good photo. this is one of those paints that is really temperamental to light.

here’s a few pics of the wheels In this shitty overcast, the picture of the engine has the pulleys painted in the same paint, the sun was out in that pic. huge difference in color isn’t it?

[ATTACH=CONFIG]21934[/ATTACH][ATTACH=CONFIG]21935[/ATTACH][ATTACH=CONFIG]21936[/ATTACH]

---

<div class="post-metadata">

### Author: ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [September 8, 2012, 7:54am UTC](https://forums.speedlife.net/t/new-wheels/225806/15 "2012-09-08T07:54:20Z")

</div>

> [@focusinprogress](#):
>
> whats with the rear axle alignment? the tire is nearly touching the front side of the wheelwell but like 4 inches away from the rear

its the suspension of the car

---

<div class="post-metadata">

### Author: ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [September 8, 2012, 8:52am UTC](https://forums.speedlife.net/t/new-wheels/225806/16 "2012-09-08T08:52:09Z")

</div>

Aren’t you going to cook those plug wires on the headers?

---

<div class="post-metadata">

### Author: ![Quattro\_Krant](https://avatars.discourse-cdn.com/v4/letter/q/ac91a4/32.png) [@Quattro\_Krant](https://forums.speedlife.net/u/Quattro_Krant)
#### Post date: [September 8, 2012, 9:01am UTC](https://forums.speedlife.net/t/new-wheels/225806/17 "2012-09-08T09:01:46Z")

</div>

Last week Sunday I was at Wegmans getting some steak kabobs. I heard this horrible sound when I started my car, I thought my exhaust fell off. Then I see your heap of shit rolling by. You floored it leaving the stop sign and it sounded like shit. A family looked and said “What the Fuck?” in facial expressions alone. I said to the wife, “He must have a tiny cock,” and did the pinky jesture for it. She and her husband both agreed and laughed, the wife even said “What a douche” Then, you did a fucking burnout in front of Pep Boys and just oozed your suck. You Robftw are the _COOLEST_ cat on planet earth. PLEASE, PLEASE show me your ways as I must be doing something wrong as I pale in comparison to you and your level of greatness.

---

<div class="post-metadata">

### Author: ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)
#### Post date: [September 8, 2012, 9:11am UTC](https://forums.speedlife.net/t/new-wheels/225806/18 "2012-09-08T09:11:37Z")

</div>

Wow, a little anger today?

---

<div class="post-metadata">

### Author: ![Anonymity](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/anonymity/32/7215_2.png) [@Anonymity](https://forums.speedlife.net/u/Anonymity)
#### Post date: [September 8, 2012, 9:13am UTC](https://forums.speedlife.net/t/new-wheels/225806/19 "2012-09-08T09:13:09Z")

</div>

Isn’t the fuel line on the belt?

---

<div class="post-metadata">

### Author: ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)
#### Post date: [September 8, 2012, 9:17am UTC](https://forums.speedlife.net/t/new-wheels/225806/20 "2012-09-08T09:17:42Z")

</div>

lol @ krant, y u so mad, bro?

also no it’s not, it was laying there for the photo it has since been moved.

no the plug wires do not melt being that close to the headers

[Next page](https://forums.speedlife.net/t/new-wheels/225806.md?page=2)
