# new whp numbers for the bimmer **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [July 26, 2008, 2:46am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188 "2008-07-26T02:46:23Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [July 26, 2008, 2:46am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/1 "2008-07-26T02:46:23Z")
well, went back to the dyno to actually do some fine tuning and raise the boost from my last sesion. here are the end results of a few hours on the dyno trying different afr’s and timing and watching egt’s. i found out that my aem sensor needs to be replaced and is nowhere near accurate anymore. timing is pretty much where it needs to be since up or down a degree resulted with loss of power. well, here is the new numbers. ![http://img.photobucket.com/albums/v371/turbociv/dynomagnus.jpg](http://img.photobucket.com/albums/v371/turbociv/dynomagnus.jpg) kinda tough to read and photobucket wont let me resize it any larger so the numbers are 553.92whp/483.82wtq sae correction was about 7whp lower. i was going to go for 600whp but i think i have some boost leaks that need to be taken care of before i blow up my turbo. huge thanks to carnut and devioustsi for helping a brother out with some tuning as usual. stay tuned for bigger/better numbers.😃 ---
**Author:** ![Estorvito](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/estorvito/32/7234_2.png) [@Estorvito](https://forums.speedlife.net/u/Estorvito)\ **Post date:** [July 26, 2008, 3:37am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/2 "2008-07-26T03:37:05Z")
sWeet… Good Job man. ---
**Author:** ![Oroc](https://avatars.discourse-cdn.com/v4/letter/o/c68b51/32.png) [@Oroc](https://forums.speedlife.net/u/Oroc)\ **Post date:** [July 26, 2008, 3:55am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/3 "2008-07-26T03:55:12Z")
very nice numbers, i’d never guess that car was putting that much power down. ---
**Author:** ![Freek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freek/32/7357_2.png) [@Freek](https://forums.speedlife.net/u/Freek)\ **Post date:** [July 26, 2008, 3:59am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/4 "2008-07-26T03:59:17Z")
looks like i’ll be in the area for a while now… i might just have to give you a rematch 🙂 lol looking good with the numbers. can’t wait to see how she sounds in person ---
**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\ **Post date:** [July 26, 2008, 5:29am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/5 "2008-07-26T05:29:39Z")
That’s a lot of power… ---
**Author:** ![Johnnyv412](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/johnnyv412/32/5226_2.png) [@Johnnyv412](https://forums.speedlife.net/u/Johnnyv412)\ **Post date:** [July 26, 2008, 5:44am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/6 "2008-07-26T05:44:40Z")
wow,congrats… ---
**Author:** ![Mike93](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike93/32/7325_2.png) [@Mike93](https://forums.speedlife.net/u/Mike93)\ **Post date:** [July 26, 2008, 6:15am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/7 "2008-07-26T06:15:57Z")
I’m very impressed, nice work! ---
**Author:** ![Z\_PHAT\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/z_phat_z/32/7293_2.png) [@Z\_PHAT\_Z](https://forums.speedlife.net/u/Z_PHAT_Z)\ **Post date:** [July 26, 2008, 7:01am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/8 "2008-07-26T07:01:05Z")
Good number! Total sleeper on the street 🙂 Can you tell me where is this dyno place is? Thanks. ---
**Author:** ![95Z28](https://avatars.discourse-cdn.com/v4/letter/9/85e7bf/32.png) [@95Z28](https://forums.speedlife.net/u/95Z28)\ **Post date:** [July 26, 2008, 7:36am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/9 "2008-07-26T07:36:41Z")
Impressive. Congrats. ---
**Author:** ![reliant\_turbo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reliant_turbo/32/7189_2.png) [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)\ **Post date:** [July 26, 2008, 7:37am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/10 "2008-07-26T07:37:13Z")
nice job. does the aem have a free-air calibration? Brian ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [July 26, 2008, 7:43am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/11 "2008-07-26T07:43:28Z")
thanks everyone. the dyno location is just outside of hell, errrrr i mean toronto.lol sorry carnut.😃 name of the place is magnus? they have a awd dyno. i was supposed to go and just do a couple pulls with divioustsi but he had a couple bugs to work out and i ended up whoring up the awd dyno. I personally prefer spina’s but the magnus facility was realy nice. aem does not have a free air calibration like the innovate does unfortunatly. Oh well, ive had it in there for a couple years now, its was due to be changed. ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [July 26, 2008, 7:46am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/12 "2008-07-26T07:46:32Z")
race gas? ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [July 26, 2008, 8:09am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/13 "2008-07-26T08:09:59Z")
when do u plan on taking this off the road? ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [July 26, 2008, 8:10am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/14 "2008-07-26T08:10:39Z")
> [@theblue](#): > > race gas? 100oct like usual. so i guess yes, we can call it race gas. but its still pump gas since its available at the pump 24hrs a day.😃 ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [July 26, 2008, 8:12am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/15 "2008-07-26T08:12:51Z")
> [@originalsin](#): > > when do u plan on taking this off the road? meh, not sure andy. i start a new job on aug11 and i need to start getting priorities straight. Im spending too much time with cars lately and i need to get back to spending time with friends and family.🙂 ---
**Author:** ![Avatar](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/avatar/32/5076_2.png) [@Avatar](https://forums.speedlife.net/u/Avatar)\ **Post date:** [July 26, 2008, 9:11am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/16 "2008-07-26T09:11:43Z")
Wow, how do you keep that thing on the ground? 😉 nice work. subscribed ---
**Author:** ![psychopjv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psychopjv/32/7251_2.png) [@psychopjv](https://forums.speedlife.net/u/psychopjv)\ **Post date:** [July 26, 2008, 9:24am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/17 "2008-07-26T09:24:35Z")
good work JD :tup: ---
**Author:** ![jkucz28](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jkucz28/32/7503_2.png) [@jkucz28](https://forums.speedlife.net/u/jkucz28)\ **Post date:** [July 26, 2008, 9:34am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/18 "2008-07-26T09:34:54Z")
awesome looked hot when i seen it yesterday ---
**Author:** ![Mr\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mr_t/32/7454_2.png) [@Mr\_T](https://forums.speedlife.net/u/Mr_T)\ **Post date:** [July 26, 2008, 10:15am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/19 "2008-07-26T10:15:44Z")
very impressive john :tup: ---
**Author:** ![justa4door](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justa4door/32/7259_2.png) [@justa4door](https://forums.speedlife.net/u/justa4door)\ **Post date:** [July 26, 2008, 11:05am UTC](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188/20 "2008-07-26T11:05:09Z")
nice # john… I hurd you put the 2 weeks in … not like your going far from where you ar now…GL on the new job [Next page](https://forums.speedlife.net/t/new-whp-numbers-for-the-bimmer/52188.md?page=2)