# newbie... **URL:** \ **Category:** PittSpeed Off Topic\ **Created:** [September 11, 2006, 8:15pm UTC](https://forums.speedlife.net/t/newbie/184906 "2006-09-11T20:15:17Z")\ **Posts on this page:** 11\ **Page:** 2
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [September 12, 2006, 3:21pm UTC](https://forums.speedlife.net/t/newbie/184906/21 "2006-09-12T15:21:17Z")
> [@FS:00 Yamaha Blaster](https://forums.speedlife.net/t/fs-00-yamaha-blaster/23995/55): > > welcome, nice truck and GIANT sig. Sorry, I fixed it… ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [September 12, 2006, 3:26pm UTC](https://forums.speedlife.net/t/newbie/184906/22 "2006-09-12T15:26:29Z")
> [@Project Grizzly guy forced to auction Trojan 'Halo suit'](https://forums.speedlife.net/t/project-grizzly-guy-forced-to-auction-trojan-halo-suit/24237/2): > > Welcome aboard, ya know the Vette wheels give it away, I remember helping you put the spacers on at Flashlight a while ago, haha that truck is wicked > So whats been up man, Tell Volker his 2 ga. is here, Guess you been having fun wiring that Caddy up, well take 'er easy, Thanks man…I personally haven’t been doing much with the caddy lately (busy with other projects), but I think the dash is going in soon. Once we get the dash in, then we can get the motor running & the rest will be easy. I got all the Air Ride wired, already. He told me you had the 2 ga, we just need to get together. ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [September 12, 2006, 3:29pm UTC](https://forums.speedlife.net/t/newbie/184906/23 "2006-09-12T15:29:23Z")
> [@SoLowXtreme"](#): > > BAD ASS TRUCK MAN !..i passed u on arona rd last saturday … truck sounded real good… Thanks, I was on my way to Hybrid, I beleive. ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [September 12, 2006, 3:50pm UTC](https://forums.speedlife.net/t/newbie/184906/24 "2006-09-12T15:50:08Z")
what kinda numbers does it run? ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [September 12, 2006, 4:08pm UTC](https://forums.speedlife.net/t/newbie/184906/25 "2006-09-12T16:08:02Z")
> [@Looking for new job](https://forums.speedlife.net/t/looking-for-new-job/24248/34): > > what kinda numbers does it run? Motor made 505 peak hp & 535 peak tq on Lingenfelter’s dyno 5 years ago when I built it. Lingenfelter did the heads & spec’d the Hyd Roller. Two years ago, the truck ran a 13.20 @ 105 mph on ET Street Radials , but the clutch was slipping. It previously ran 13.48 @ 109mph with the 'Vette wheels & Nittos. I put in a new SPEC hybrid street clutch last summer, but never raced it. I just finished updating to Gen 7 DFI with sequential port & updated ignition system. Have yet to dyno or race it. It was off the road for the last year because I lost interest in it (I’ve had it 15 years & lost interest before). Planning on getting it tuned soon & making some passes. After putting the new clutch/new aluminum flywheel in last year, it made 362 wheel hp on Hybrid’s dyno at 9.8 a/f ratio. This is why I upgraded the EFI system. The PC interface went bad & I couldn’t make any changes to the ECM. I am hoping for around 410 - 420 hp at the wheels & high 12s in the 1/4. ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [September 12, 2006, 4:41pm UTC](https://forums.speedlife.net/t/newbie/184906/26 "2006-09-12T16:41:54Z")
> [@Fake 12 year old?](https://forums.speedlife.net/t/fake-12-year-old/24205/16): > > Motor made 505 peak hp & 535 peak tq on Lingenfelter’s dyno 5 years ago when I built it. Lingenfelter did the heads & spec’d the Hyd Roller. > > Two years ago, the truck ran a 13.20 @ 105 mph on ET Street Radials , but the clutch was slipping. It previously ran 13.48 @ 109mph with the 'Vette wheels & Nittos. I put in a new SPEC hybrid street clutch last summer, but never raced it. I just finished updating to Gen 7 DFI with sequential port & updated ignition system. Have yet to dyno or race it. It was off the road for the last year because I lost interest in it (I’ve had it 15 years & lost interest before). Planning on getting it tuned soon & making some passes. > > After putting the new clutch/new aluminum flywheel in last year, it made 362 wheel hp on Hybrid’s dyno at 9.8 a/f ratio. This is why I upgraded the EFI system. The PC interface went bad & I couldn’t make any changes to the ECM. I am hoping for around 410 - 420 hp at the wheels & high 12s in the 1/4. we should be a close race then ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [September 12, 2006, 4:45pm UTC](https://forums.speedlife.net/t/newbie/184906/27 "2006-09-12T16:45:07Z")
> [@Stupid F\*ing neighbors.](https://forums.speedlife.net/t/stupid-f-ing-neighbors/24220/36): > > we should be a close race then Whaddya got? ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [September 12, 2006, 5:08pm UTC](https://forums.speedlife.net/t/newbie/184906/28 "2006-09-12T17:08:21Z")
83 chevy truck. carbed 350 vortec with a stock gm lt1 cam. 3500 stall. 13.5@99 last year. gonna put a bigger cam in maybe before winter, and hoping for high 12’s, then maybe spray it and see what breaks vid from last year [http://media.putfile.com/1358-](http://media.putfile.com/1358-) ---
**Author:** ![SCHMEIDER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/schmeider/32/6032_2.png) [@SCHMEIDER](https://forums.speedlife.net/u/SCHMEIDER)\ **Post date:** [September 12, 2006, 5:10pm UTC](https://forums.speedlife.net/t/newbie/184906/29 "2006-09-12T17:10:08Z")
nice truck…always go wit the **_bowtie_** not the oval ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [September 12, 2006, 5:38pm UTC](https://forums.speedlife.net/t/newbie/184906/30 "2006-09-12T17:38:56Z")
> [@eurodad"](#): > > 83 chevy truck. carbed 350 vortec with a stock gm lt1 cam. 3500 stall. 13.5@99 last year. gonna put a bigger cam in maybe before winter, and hoping for high 12’s, then maybe spray it and see what breaks > > vid from last year > [http://media.putfile.com/1358-](http://media.putfile.com/1358-) Lookin’ good. Glad to see other trucks on the board. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [September 13, 2006, 4:13am UTC](https://forums.speedlife.net/t/newbie/184906/31 "2006-09-13T04:13:02Z")
carry on in the other forums!:blue: [Previous page](https://forums.speedlife.net/t/newbie/184906.md?page=1)