# Ninety1two40's 240sx

**URL:** <https://forums.speedlife.net/t/ninety1two40s-240sx/236483>\
**Category:** Builds\
**Created:** [April 17, 2008, 5:46am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483 "2008-04-17T05:46:00Z")\
**Posts on this page:** 20\
**Page:** 21

<div class="post-metadata">

**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\
**Post date:** [April 13, 2009, 10:02am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/401 "2009-04-13T10:02:08Z")

</div>

My tires rub alot.

I deal with it for the cool point. It’s going to be funny when i go lower. Front tire smoke off the fender FTW!

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [April 13, 2009, 10:19am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/402 "2009-04-13T10:19:14Z")

</div>

> [@Troopers ambushed](https://forums.speedlife.net/t/troopers-ambushed/16799/206):
>
> Then he’s a retard for posting it, and that axle was probably already bad.

Im pretty sure you have 0% knowledge of what your talking about.

Its a R200V.

Short term = VLSD. Bought it off Archie. Oshina6, or w.e on here.

Mine is known by alot of people to act like a welded diff, going around tight corners. aka parking in a parking lot. it clunks and all. other than that, it acts like it should, Hence why its not in my car.  
Both those axles were BRAND NEW when i bought the car, bc the old ones had a tear in each boot, leaking the grease everywhere.

---

<div class="post-metadata">

**Author:** ![Jersey\_Fresh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jersey_fresh/32/6418_2.png) [@Jersey\_Fresh](https://forums.speedlife.net/u/Jersey_Fresh)\
**Post date:** [April 13, 2009, 10:30am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/403 "2009-04-13T10:30:00Z")

</div>

Why would a VLLSD “Clunk”? I could see if it was a mechanical posi like a detroit locker… but a VLSD? a VLSD is the same concept as an open diff, except it has a “grease pack” in the center, when it heats up, it expands giving drive to both wheels… Theres nothing at all that should “clunk”, i have a VLSD in my daily driver, it doesnt even attempt to chirp a tire going around a turn

---

<div class="post-metadata">

**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\
**Post date:** [April 13, 2009, 10:33am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/404 "2009-04-13T10:33:15Z")

</div>

> [@At least it'll look hot while it sits broken in your garage](https://forums.speedlife.net/t/at-least-itll-look-hot-while-it-sits-broken-in-your-garage/17001/5):
>
> Im pretty sure you have 0% knowledge of what your talking about.
> 
> Its a R200V.
> 
> Short term = VLSD. Bought it off Archie. Oshina6, or w.e on here.
> 
> Mine is known by alot of people to act like a welded diff, going around tight corners. aka parking in a parking lot. it clunks and all. other than that, it acts like it should, Hence why its not in my car.  
> Both those axles were BRAND NEW when i bought the car, bc the old ones had a tear in each boot, leaking the grease everywhere.

Ok so let’s get this straight.

You’re still retarded.

You had a VLSD which is basically an LSD that operates off of fluid transfer instead of clutches. Regardless, it’s still a limited slip diff, and if everything is working correctly should definitely not ‘act like a welded diff’, and if it does, Nissan engineers are retards…knowing this isn’t the case I’m going to stick with you being the retard.

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [April 13, 2009, 10:33am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/405 "2009-04-13T10:33:43Z")

</div>

> [@Jersey Fresh"](#):
>
> Why would a VLLSD “Clunk”? I could see if it was a mechanical posi like a detroit locker… but a VLSD? a VLSD is the same concept as an open diff, except it has a “grease pack” in the center, when it heats up, it expands giving drive to both wheels… Theres nothing at all that should “clunk”, i have a VLSD in my daily driver, it doesnt even attempt to chirp a tire going around a turn

idfk why it does it hence why its not in my car. theres obv something wrong with it. Ask justin/mcflurry/steve/almost anyone.

---

<div class="post-metadata">

**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\
**Post date:** [April 13, 2009, 10:33am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/406 "2009-04-13T10:33:48Z")

</div>

> [@Jersey Fresh"](#):
>
> Why would a VLLSD “Clunk”? I could see if it was a mechanical posi like a detroit locker… but a VLSD? a VLSD is the same concept as an open diff, except it has a “grease pack” in the center, when it heats up, it expands giving drive to both wheels… Theres nothing at all that should “clunk”, i have a VLSD in my daily driver, it doesnt even attempt to chirp a tire going around a turn

cliffs:

Jeff es retard

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [April 13, 2009, 10:35am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/407 "2009-04-13T10:35:18Z")

</div>

> [@new on these forums...](https://forums.speedlife.net/t/new-on-these-forums/16944/19):
>
> Ok so let’s get this straight.
> 
> You’re still retarded.
> 
> You had a VLSD which is basically an LSD that operates off of fluid transfer instead of clutches. Regardless, it’s still a limited slip diff, and if everything is working correctly should definitely not ‘act like a welded diff’, and if it does, Nissan engineers are retards…knowing this isn’t the case I’m going to stick with you being the retard.

Im being a retard because i bought a “vlsd” and installed it. It broke an axle. I replaced the axle and put the open diff back in until i find out whats wrong.

Your logic is flawed.

---

<div class="post-metadata">

**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\
**Post date:** [April 13, 2009, 10:36am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/408 "2009-04-13T10:36:36Z")

</div>

Oh I read that as you blaming the LSD for breaking the axle. Which doesn’t make sense.

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [April 13, 2009, 10:38am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/409 "2009-04-13T10:38:16Z")

</div>

> [@TW: 03 s2000](https://forums.speedlife.net/t/tw-03-s2000/16994/9):
>
> Oh I read that as you blaming the LSD for breaking the axle. Which doesn’t make sense.

Calm Down. if i was a retard my car would look like this:

---

<div class="post-metadata">

**Author:** ![car\_ramrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/car_ramrod/32/6441_2.png) [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)\
**Post date:** [April 13, 2009, 10:40am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/410 "2009-04-13T10:40:35Z")

</div>

wow throwing people under the bus lol

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [April 13, 2009, 10:41am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/411 "2009-04-13T10:41:35Z")

</div>

> [@Nip/Tuck](https://forums.speedlife.net/t/nip-tuck/2602/133):
>
> wow throwing people under the bus lol

people do it to me, so hey… why not. :lol

---

<div class="post-metadata">

**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\
**Post date:** [April 13, 2009, 10:55am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/412 "2009-04-13T10:55:16Z")

</div>

The diff did clunk and the wheels would skip around sharp turns. I really don’t think it’s a VLSD though, if anything VLSD wear out and become open diffs.

---

<div class="post-metadata">

**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\
**Post date:** [April 13, 2009, 11:08am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/413 "2009-04-13T11:08:51Z")

</div>

Sounds like you somehow managed to break something in the diff itself and lock it up.

---

<div class="post-metadata">

**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\
**Post date:** [April 13, 2009, 11:48am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/414 "2009-04-13T11:48:56Z")

</div>

Yeah, retard.

---

<div class="post-metadata">

**Author:** ![Shady](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@Shady](https://forums.speedlife.net/u/Shady)\
**Post date:** [April 13, 2009, 1:39pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/415 "2009-04-13T13:39:50Z")

</div>

> [@Gas Oven Issues](https://forums.speedlife.net/t/gas-oven-issues/16961/5):
>
> Sounds like you somehow managed to break something in the diff itself and lock it up.

It’s done that since day 1 when he got it… I remember asking him if he got a welded diff…

Jeff let me have your VLSD plz so it doesnt collect dust on your garage shelf

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [April 13, 2009, 1:40pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/416 "2009-04-13T13:40:49Z")

</div>

> [@Gas Oven Issues](https://forums.speedlife.net/t/gas-oven-issues/16961/5):
>
> Sounds like you somehow managed to break something in the diff itself and lock it up.

i didnt do anything :lol. i just stop caring.

ask steve. it did it on the test drive 2 minutes after i put it in.

---

<div class="post-metadata">

**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\
**Post date:** [April 13, 2009, 1:45pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/417 "2009-04-13T13:45:42Z")

</div>

> [@So as some of you may know...I suck at lying](https://forums.speedlife.net/t/so-as-some-of-you-may-know-i-suck-at-lying/17006/3):
>
> i didnt do anything :lol. i just stop caring.
> 
> ask steve. it did it on the test drive 2 minutes after i put it in.

Troof, but I never saw the inside of the differential housing.

BTW, I dropped my KAAZ 1.5 diff off with Hank and he’s going to have his buddy check it out and make sure the gears mesh right. I also think my axles are on the way out now. So I hope to pick up another set this weekend.

---

<div class="post-metadata">

**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\
**Post date:** [April 13, 2009, 1:47pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/418 "2009-04-13T13:47:36Z")

</div>

Did you do the break in thingy where you drive around in circles? or did you get it used?

---

<div class="post-metadata">

**Author:** ![Shady](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@Shady](https://forums.speedlife.net/u/Shady)\
**Post date:** [April 13, 2009, 1:50pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/419 "2009-04-13T13:50:09Z")

</div>

> [@So as some of you may know...I suck at lying](https://forums.speedlife.net/t/so-as-some-of-you-may-know-i-suck-at-lying/17006/6):
>
> Troof, but I never saw the inside of the differential housing.
> 
> BTW, I dropped my KAAZ 1.5 diff off with Hank and he’s going to have his buddy check it out and make sure the gears mesh right. I also think my axles are on the way out now. So I hope to pick up another set this weekend.

You got home quick… stop driving so fast.

Although I prolly shouldent talk :rofl

---

<div class="post-metadata">

**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\
**Post date:** [April 13, 2009, 1:53pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/420 "2009-04-13T13:53:04Z")

</div>

> [@So as some of you may know...I suck at lying](https://forums.speedlife.net/t/so-as-some-of-you-may-know-i-suck-at-lying/17006/7):
>
> Did you do the break in thingy where you drive around in circles? or did you get it used?

used. archie said it was from a R32 skyline… altho it had the output shafts of a 300zx, and i didnt have to switch the rear cover like some have to when swapping in different diffs.

[Previous page](https://forums.speedlife.net/t/ninety1two40s-240sx/236483.md?page=20)

[Next page](https://forums.speedlife.net/t/ninety1two40s-240sx/236483.md?page=22)
