# Ninety1two40's 240sx **URL:** \ **Category:** Builds\ **Created:** [April 17, 2008, 5:46am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483 "2008-04-17T05:46:00Z")\ **Posts on this page:** 20\ **Page:** 23
**Author:** ![car\_ramrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/car_ramrod/32/6441_2.png) [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)\ **Post date:** [April 14, 2009, 11:18am UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/441 "2009-04-14T11:18:24Z")
I have the same coilovers and even through an entire day of drifting they didn’t loosen on me…My spring rate collars aren’t even that tight the only place it would be coming apart would be at the bottom I assume if it is changing ride height. Edit\* do yours have a pre-spring underneath the main spring on the rears? ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [April 14, 2009, 12:02pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/442 "2009-04-14T12:02:00Z")
> [@FS: 1995 Eagle Talon TSi AWD](https://forums.speedlife.net/t/fs-1995-eagle-talon-tsi-awd/17025/2): > > I have the same coilovers and even through an entire day of drifting they didn’t loosen on me…My spring rate collars aren’t even that tight > > the only place it would be coming apart would be at the bottom I assume if it is changing ride height. > > Edit\* > do yours have a pre-spring underneath the main spring on the rears? No we have the exact same setup. ---
**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\ **Post date:** [April 14, 2009, 12:46pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/443 "2009-04-14T12:46:35Z")
ive had mine since july and they havent moved once. GL with the car. was going to ask you for help on the new subframe bushings… . but im flying out to AZ for a week. so ill ask u after lol ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [April 14, 2009, 12:57pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/444 "2009-04-14T12:57:52Z")
possibly your car just settled? I mean my car settles about an inch when the suspension is upset from lifting the car or something of that nature ---
**Author:** ![car\_ramrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/car_ramrod/32/6441_2.png) [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)\ **Post date:** [April 14, 2009, 1:08pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/445 "2009-04-14T13:08:01Z")
> [@WTB: vzw razr phone..](https://forums.speedlife.net/t/wtb-vzw-razr-phone/16995/12): > > No we have the exact same setup. Mine has those helper springs ---
**Author:** ![w.tungsten](https://avatars.discourse-cdn.com/v4/letter/w/7bcc69/32.png) [@w.tungsten](https://forums.speedlife.net/u/w.tungsten)\ **Post date:** [April 14, 2009, 1:09pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/446 "2009-04-14T13:09:59Z")
> [@9-4-6 Godsmack @ Darien Lake](https://forums.speedlife.net/t/9-4-6-godsmack-darien-lake/16922/18): > > possibly your car just settled? > > I mean my car settles about an inch when the suspension is upset from lifting the car or something of that nature That was my other idea. The springs may have settled. I dunno though Stance’s springs are pretty stiff, I don’t think you’d really notice it. w.e just raise it and keep driving. ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [April 14, 2009, 1:12pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/447 "2009-04-14T13:12:00Z")
Whoever continues to neg rep me in this thread calling me a noob please get your facts straight. Because I am sure I have more expirience in S-chassi then most of you (there are maybe 2 people on here how have been into s-chassis longer than me) I’m trying to constructively help someone here ---
**Author:** ![Hooked\_on\_240](https://avatars.discourse-cdn.com/v4/letter/h/b9e5f3/32.png) [@Hooked\_on\_240](https://forums.speedlife.net/u/Hooked_on_240)\ **Post date:** [April 14, 2009, 1:27pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/448 "2009-04-14T13:27:32Z")
+rep to get you back up! the rep system on here sucks dick. -rep for the stupiest shit. i got one from here, and another from the AIC thread. ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [April 14, 2009, 1:39pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/449 "2009-04-14T13:39:15Z")
When I get home I’ll check out the whole setup. ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [April 14, 2009, 1:43pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/450 "2009-04-14T13:43:51Z")
Was it knocking or squeaking at all? I would want to say maybe it was a spring wasn’t originally seated properly but that kinda hard to do on the stance coilovers since the perches are nice and flat ---
**Author:** ![car\_ramrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/car_ramrod/32/6441_2.png) [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)\ **Post date:** [April 14, 2009, 4:58pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/451 "2009-04-14T16:58:53Z")
I will say that I have noticed that i can hear the spring turn once in awhile on its perch…it is tough to get that completely tight ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [April 14, 2009, 7:02pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/452 "2009-04-14T19:02:28Z")
Here’s the deal: 1. The coilovers don’t make any noise. 2. All the collars were tight. 3. I have a 2 finger gap (between wheel and fender) on the pass side rear. On the drivers side rear it’s about 1.5 finger gap. They were a “loose” 2 finger gap the day before. So maybe they just settled in after hitting up some Knox roads :lol I also believe the fronts dropped a bit also, but they are even. 4. I measured the rears from the bottom of the lower collar to the top of the spring. The pass side was 1/8" lower than the driver’s side, but the drivers side has a smaller wheel gap. 5. The axles are fucked. I’m in the process of getting rebuilt ones. I think the diff is fine, it was welded VERY well :lol Hopefully I get my KAAZ diff back tomorrow 😃 ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [April 14, 2009, 7:07pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/453 "2009-04-14T19:07:39Z")
I know that on SC the passengers side naturally sit lower than the drivers side with nobody in the car. Maybe this is true for s13 ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [April 14, 2009, 7:18pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/454 "2009-04-14T19:18:23Z")
> [@my new race style idea.](https://forums.speedlife.net/t/my-new-race-style-idea/17034/16): > > I know that on SC the passengers side naturally sit lower than the drivers side with nobody in the car. Maybe this is true for s13 I’ve never heard about that for the S13’s but maybe. ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [April 14, 2009, 7:38pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/455 "2009-04-14T19:38:45Z")
but really it just sounds like things settling. ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [April 14, 2009, 7:42pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/456 "2009-04-14T19:42:31Z")
> [@Goodbye Buffalo.](https://forums.speedlife.net/t/goodbye-buffalo/17032/17): > > but really it just sounds like things settling. srs your probably right srsly ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [April 14, 2009, 7:43pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/457 "2009-04-14T19:43:41Z")
The bearings in those rear hubs are okay, right? Also, I wanted to know, when you put the front hubs on, did they need to be pressed on or they just slid on? ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [April 14, 2009, 7:45pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/458 "2009-04-14T19:45:38Z")
> [@2007 Avenger](https://forums.speedlife.net/t/2007-avenger/17042/11): > > The bearings in those rear hubs are okay, right? > > Also, I wanted to know, when you put the front hubs on, did they need to be pressed on or they just slid on? Yeah bearings are good. I had j30 hubs with new s13 bearings pressed in for the fronts, slid on like butter:thumbup ---
**Author:** ![YFZ460](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yfz460/32/6343_2.png) [@YFZ460](https://forums.speedlife.net/u/YFZ460)\ **Post date:** [April 14, 2009, 8:00pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/459 "2009-04-14T20:00:02Z")
In Knox, springs don’t settle. They break. ---
**Author:** ![w.tungsten](https://avatars.discourse-cdn.com/v4/letter/w/7bcc69/32.png) [@w.tungsten](https://forums.speedlife.net/u/w.tungsten)\ **Post date:** [April 14, 2009, 8:06pm UTC](https://forums.speedlife.net/t/ninety1two40s-240sx/236483/460 "2009-04-14T20:06:12Z")
> [@Goodbye Buffalo.](https://forums.speedlife.net/t/goodbye-buffalo/17032/17): > > but really it just sounds like things settling. +1 . [Previous page](https://forums.speedlife.net/t/ninety1two40s-240sx/236483.md?page=22) [Next page](https://forums.speedlife.net/t/ninety1two40s-240sx/236483.md?page=24)